Effect of Heat Treatment Process on Microstructures and Properties of 304 Stainless Steel Cladding Layers

Rongxia Chai; Kaikai Li; Wei Guo; Xiurong Fang

doi:10.3788/LOP55.051405

[1] Zhao J F, Ma Z Y, Xie D Q et al. Metal additive manufacturing technique[J]. Journal of Nanjing University of Aeronautics & Astronautics, 46, 675-683(2014).

[2] Wang Z H, Wang H M, Liu D. Microstructure and mechanical properties of AF1410 ultra-high strength steel using laser additive manufacture technique[J]. Chinese Journal of Lasers, 43, 0403001(2016).

[3] Wang X L, Sun W L, Zhang J J et al. Path planning of laser cladding and remanufacturing based on reverse engineering[J]. Laser & Optoelectronics Progress, 54, 051401(2017).

[4] Zan S P, Jiao J K, Zhang W W. Study on laser cladding process of 316L stainless steel powder[J]. Laser & Optoelectronics Progress, 53, 061406(2016).

[5] Wang H M, Zhang S Q, Wang X M. Progress and challenges of laser direct manufacturing of large titanium structural components[J]. Chinese Journal of Lasers, 36, 3204-3209(2009).

[6] Lin X, Huang W D. Laser additive manufacturing of high-performance metal components[J]. Scientia Sinica: Informations, 45, 1111-1126(2015).

[7] Lin X, Huang W D. High performance metal additive manufacturing technology applied in aviation field[J]. Materials China, 34, 684-688(2015).

[8] Wang C, Shi S H, Fang Q Q et al. Research on laser cladding forming of close-packed multivariant twisty thin-wall parts[J]. Chinese Journal of Lasers, 44, 0602004(2017).

[9] Duan X X, Gao S Y, Gu Y F et al. Study on reinforcement mechanism and frictional wear properties of 316L-SiC mixed layer deposited by laser cladding[J]. Chinese Journal of Lasers, 43, 0103004(2016).

[10] Fang Q Q, Fu G Y, Wang C et al. Laser direct forming technology of double thin-walled parts with connecting ribs[J]. Chinese Journal of Lasers, 44, 0202005(2017).

[11] Qiu X W, Liu C G, Zhang Y P. Microstructure and property of Al2CoCrCuFeNixTi high entropy alloy coatings prepared by laser cladding[J]. Laser & Optoelectronics Progress, 54, 051404(2017).

[12] Wang H M. Materials'fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 35, 2690-2698(2014).

[13] He B W, Ran X Z, Tian X J et al. Corrosion resistance research of laser additive manufactured TC11 titanium alloy[J]. Chinese Journal of Lasers, 43, 0403004(2016).

[14] Tang Y J, Liu Y T, Zhang Y Z. Effect of heat treatment on microstructure and properties of laser additive manufactured Ti2AlNb-based alloy[J]. Aeronautical Manufacturing Technology, 514, 16-21(2016).

[15] Zhang A L, Zhu H L, Tang F. The effect of duplex annealing on microstructure and mechanical properties of laser deposited Ti60A alloy[J]. Manned Spaceflight, 21, 346-350(2015).

[16] Liu Y, Li A, Cheng X et al. Effects of heat treatment on microstructure and tensile properties of laser melting deposited AISI 431 martensitic stainless steel[J]. Materials Science & Engineering A, 666, 27-33(2016). http://www.sciencedirect.com/science/article/pii/S0921509316303756

[17] Yadollahi A, Shamsaei N, Thompson S et al. Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel[J]. Materials Science & Engineering A, 644, 171-183(2015). http://www.sciencedirect.com/science/article/pii/S0921509315302082

[18] Xu C W, Wang Z Q, Hu X et al. Research on microstructure and property of laser cladding layer on 1Cr17Ni2 stainless steel[J]. Surface Technology, 40, 11-13(2011).