[1] Gilmour A S. Jr. Klystrons, traveling wave tubes, magnetrons, crossed-field amplifiers, and gyrotrons[M]. Boston: Artech House(2011).
[2] Feng C. Research on microstrip meander line traveling wave tube based on periodical metallic rods[D]. Nanjing: Southeast University, 3-12(2018).
[3] Ghosh T K, Challis A J, Jacob A et al. Design of helix pitch profile for broadband traveling-wave tubes[J]. IEEE Transactions on Electron Devices, 56, 1135-1140(2009).
[4] D'Agostino S. Paoloni C. Cathode voltage adjustment to compensate helix pitch tolerance in TWTs[J]. Electronics Letters, 40, 36-38(2004).
[5] Zhang X M, Yang G, Ou H L et al. Theoretical investigation into an ultra-wideband helix traveling-wave tube. [C]∥2019 International Vacuum Electronics Conference (IVEC), April 28-May 1, 2019, Busan, Korea (South). IEEE, 18792381(2019).
[6] Ghosh T K, Jacob A, Tokeley A et al. Optimization of helix pitch profile for broadband Mini-TWTs. [C]∥2008 IEEE International Vacuum Electronics Conference, April 22-24, 2008, Monterey, CA, USA. IEEE, 10072808(2008).
[8] Wang X N, Su X B, Xiao L. Design ofhigh-efficiency Ka/Q dual-band millimeter-wave helix traveling wave tube slow wave structure[J]. Chinese Journal of Vacuum Science and Technology, 36, 1234-1240(2016).
[9] Tang K S, Zhao G, Li S et al. Analysis and optimization of parameters of double-taper helical slow-wave structure[J]. High Power Laser and Particle Beams, 20, 1507-1510(2008).
[10] Li X W, Wang X N, Yu S J et al. Simulation of interference-fit of helix in assembling space helix traveling wave tube[J]. Chinese Journal of Vacuum Science and Technology, 36, 1017-1023(2016).
[11] Chen C. Traveling wave tube structure design and the error analysis of the processing[D]. Chengdu: University of Electronic Science and Technology of China, 35-46(2016).
[15] Liu Z S, Peng L Z, Li Y et al[J]. Measurement of taper angle deviation and generatrix straightness of machined parts with large sizes Acta Metrologica Sinica, 1991, 257-261, 274.
[17] General Administration of Quality Supervision, Inspection, Quarantine of the People's Republic of China & Standardization Administration of the People's Republic of China,. Geometrical product specifications (GPS)-(2009).
[20] International Organization for Standardization. Geometrical product specifications (GPS). Surface texture: Areal-Part 2: terms, definitions and surface texture parameters: ISO 25178-2:2012[S]. Switzerland: IHS(2012).