• Acta Optica Sinica
  • Vol. 31, Issue 2, 216005 (2011)
Cheng Cheng*, Jiang Huilü, and Ma Dewei
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/aos201131.0216005 Cite this Article Set citation alerts
    Cheng Cheng, Jiang Huilü, Ma Dewei. PbSe Quantum Dot-Doped Sodium-Aluminum-Borosilicate Glass Fabricated by a Melting Method[J]. Acta Optica Sinica, 2011, 31(2): 216005 Copy Citation Text show less

    Abstract

    As a novel optical communication material, quantum dot (QD)-doped glass became one of the focal researches in recent years. PbSe QD-doped sodium-aluminum-borosilicate glass is fabricated successfully by the melting method. The crystallization, size and distribution of the PbSe QD in the glass are investigated by X-ray diffractometer and transmission electron microscopy. The absorption and photoluminescence (PL) spectra of the PbSe QD doped-glass are also observed by UV-visible-NIR spectrophotometer and fluorescence spectrometer, respectively. The obtained results suggest that, when heat treatment temperature T is lower than 500 ℃, there is no observed PL emission in glass under irradiation of 1064 nm laser. When treatenent temperature T>550 ℃, the glass appears strong PL emissions with full width at half maximum (FWHM) in the range of 275~808 nm, and the PL peak wavelengths in 1676~2757 nm region strongly depended on the QD size. The size of PbSe QD is positively correlated with the heat treatment temperature, a Stokes shift of between the absorption and PL peaks is 20~110 nm.
    Cheng Cheng, Jiang Huilü, Ma Dewei. PbSe Quantum Dot-Doped Sodium-Aluminum-Borosilicate Glass Fabricated by a Melting Method[J]. Acta Optica Sinica, 2011, 31(2): 216005
    Download Citation