• Infrared and Laser Engineering
  • Vol. 51, Issue 5, 20210389 (2022)
Yafei Xue1, Ziyi Luo1, Shanguo Han1, Detao Cai1, Wanghui Xu1, Weiping Fang1, and Haoting Liu2、*
Author Affiliations
  • 1China-Ukraine Institute of Welding, Guangdong Academy of Sciences, China-Ukraine Belt and Road Joint Laboratory on Materials Joining and Advanced Manufacturing, Guangdong Provincial Key Laboratory of Advanced Welding Technology, Guangzhou 510650, China
  • 2Beijing Engineering Research Center of Industrial Spectrum Imaging, School of Automation and Electrical Engineering, University of Science and Technology Beijing, Beijing 100083, China
  • show less
    DOI: 10.3788/IRLA20210389 Cite this Article
    Yafei Xue, Ziyi Luo, Shanguo Han, Detao Cai, Wanghui Xu, Weiping Fang, Haoting Liu. Effect of laser scanning speed of the removal quality of rust layer on carbon steel surface[J]. Infrared and Laser Engineering, 2022, 51(5): 20210389 Copy Citation Text show less
    References

    [1] S Sun, W Chen, S Yi, Junxiang Wang, et al. Study of the corrosion protection behavior of neutral water-based rust remover on carbon steel. Colloids & Surfaces A: Physicochemical & Engineering Aspects, 558, 130-137(2018).

    [2] Jianfeng Li, Shengsong Ge, Junxiang Wang, et al. Water-based rust converter and its polymer composites for surface anticorrosion. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 537, 334-342(2018).

    [3] Yanqun Tong, Ang Zhang, Jianyu Huang, et al. Distribution and influence of oxygen content of laser pretreated aluminum alloy surface before welding. Chinese Journal of Lasers, 46, 0202003(2019).

    [4] Peiyun Xia, Yuhuan Yin, Aijun Cai, et al. Laser cleaning process of 2219 aluminum alloy anodic oxide film before welding. Chinese Journal of Lasers, 46, 0102005(2019).

    [5] Guangxing Zhang, Xueming Hua, Fang Li, et al. Research and application status of laser de-rusting and de-painting. Hot Working Technology, 48, 1-4(2019).

    [6] M Sanz, M Oujja, C Ascaso, et al. Infrared and ultraviolet laser removal of crustose lichens on dolomite heritage stone. Applied Surface Science, 346, 248-255(2015).

    [7] Shuai Li, Ye Li, Pan Li, et al. Study on the varnish stripping experiment based on the high power fiber laser. Infrared and Laser Engineering, 46, S106008(2017).

    [8] Yu Pan, Mingdi Wang, Jincong Liu, et al. Process and mechanism of HT200 laser de-rusting for 100 W fiber laser. Applied Laser, 39, 269-274(2019).

    [9] Mingkun Yang, Fangrong Zhou, Yi Ma, et al. Laser rust removing process of deep rusting steel plate. Applied Laser, 38, 975-980(2018).

    [10] Zhiguo Ren, Changzhong Wu, Huaining Chen, et al. Mechanism of laser derusting and surface properties of low carbon steel. Opto-Electronic Engineering, 44, 1210-1216(2017).

    [11] Yan Zhang, Yaping Huang. Finite element simulation and parameter optimization of laser rust removal technology for marine steel plate. Applied Laser, 40, 294-299(2020).

    [12] Tong Yanqun. Study on mechanism application fundamentals of laser remobal of metal oxides [D]. Zhenjiang: Jiangsu University, 2014. (in Chinese)

    [13] Yafei Xue, Wei Wang, Xuefeng Wang, et al. Laser cleaning technology of 38CrMoAl material surface pollutants. Infrared and Laser Engineering, 47, 0706004(2018).

    [14] Jianzhong Zhou, Huating Li, Qi Sun, et al. Laser derusting mechanism of AH32 steel based on cleaned surface topography. Optics and Precision Engineering, 27, 1754-1764(2019).

    [15] Faria D L A de, S V Silva, M T D Oliveira. Raman microspectroscopy of some iron oxides and oxyhydroxides. J Raman Spectrosc, 28, 873-878(1997).

    [16] Xiaomei Yang. The research of raman spectrum on steel rusty layer from atmosphere corrosion. The Journal of Light Scattering, 19, 134-137(2007).

    Yafei Xue, Ziyi Luo, Shanguo Han, Detao Cai, Wanghui Xu, Weiping Fang, Haoting Liu. Effect of laser scanning speed of the removal quality of rust layer on carbon steel surface[J]. Infrared and Laser Engineering, 2022, 51(5): 20210389
    Download Citation