Fabrication and test of high-precision off-axis aspheric lens

Zhong Bo; Chen Xianhua; Wang Jian; Zhou Lian; Shi Qikai; Deng Wenhui

doi:10.3788/irla201847.0718003

[1] Spaeth M L, Manes K R, Widmayer C C, et al. The national ignition facility wavefront requirements and optical architecture [J]. Optical Engineering, 2004, 43(12): 25-42.

[2] Semenov A P, Abdulkadyrov M A, Belousov S P, et al. Technological features of the fabrication of the primary mirrors of telescopes [J]. J Opt Technol, 2013, 80(4): 207-213.

[3] Martin H M, Allen R G, Burge J H, et al. Fabrication and testing of the first 8.4 m off-axis segment for the Giant Magellan Telescope [C]//SPIE, 2010, 7739: 77390A.

[4] Yu G Y, Walker D D, Li H Y. Research on fabrication of mirror segments for E-ELT[C]//SPIE, 2012, 8416: 841602.

[5] Glatzel H, Ashworth D, Bremer M, et al. Projection optics for extreme ultraviolet lithography(EUVL) micro-field exposure tools (METs) with a numerical aperture of 0.5[C]// SPIE Advanced Lithography, 2013, 8679(1): 867917.

[6] Meng Xiaohui, Wang Yonggang, Ma Xianmei, et al. Fabrication and test for Ф520 mm secondary mirror of on-axis three mirror space camera[J]. Infrared and Laser Engineering, 2017, 46(8): 0818002. (in Chinese)

[7] Zhang Xin, Luo Xiao, Yan Lisong, et al. Technology of large aperture off-axis parabolic mirror with Tri-station processing center[J]. Infrared and Laser Engineering, 2016, 45(8): 0819001. (in Chinese)

[8] Aikens D M. The origin and evolution of the optics for the national ignition facility[C]//SPIE, 1995, 2536: 2-12.

[9] Campbell J H, Hawley-Fedder R, Stolz C J. NIF optical materials and fabrication technologies: an overview[C]//SPIE, 2004: 5341.

[10] Pan J H. Design, Fabrication and Test of Optical Aspheric Surface[M]. Suzhou: Soochow University Press, 2004. (in Chinese)

[11] Chen H B, Wang Y W, Feng Z J. Methods to determine best fit sphere for large off-axis aspheric lens [J]. Journal of Tsinghua University (Science and Technology), 2004, 44(8): 1040-1042. (in Chinese)

[12] Dumas P, Hall C, Hallock B, et al. Complete sub-aperture pre-polishing & finishing solution to improve speed and determinism in asphere manufacture[C]//SPIE, 2007, 6671:1-11.

[13] Hu H, Song C, Xie X. Combined fabrication technique for high-precision aspheric optical windows[C]//SPIE, 2016, 9912: 99123W.

[14] Zhong B, Chen X H, Pan R, et al. The effect of tool wear on the removal characteristics in high-efficiency bonnet polishing[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91: 3653-3662.

[15] Chen X H, Zhong B, Wang J, et al. Distortion of removal function based on the local asphericity of aspheric surface and the viscoelasticity of polishing tool in computer-controlled optical surfacing[J]. J Mechanical Engineering Science, 2018, 232(7): 1135-1145.