[1] Robertson J. Diamond-like amorphous carbon[J]. Materials Science and Engineering, 2002, 37(4): 129-281.

[2] Xue Qunji, Wang Liping. Thin Film Materials of Carbon-base DLC[M]. Beijing: Science Press, 2012: 143-159, 452.

[3] Grigonis A, Rutkuniene Z, Vinciunaite V. Different wavelength laser irradiation of amorphous carbon[J]. Acta Physica Polonica A, 2011, 120(1): 26-29.

[4] Luo Le, Zhang Junfang, Fang Xiaodong, et al.. Influence of the laser pulsed energy upon the diamond-like carbon film and its infrared property[J]. Chinese J Lasers, 2010, 37(12): 3121-3126.

[5] Luo Le, Zhao Duliang, Chu Yaqiong, et al.. Experimental investigation of diamond- like carbon films deposited by pulsed laser deposition[J]. Chinese J Quantum Electronics, 2012, 21(6): 759-764.

[6] Goncharov V, Gusakov G, Puzyrev M, et al.. Pulsed laser deposition of diamond- like amorphous carbon films from different carbon targets[J]. Publ Astron Obs Belgrade, 2010, 89(2): 125-129.

[7] Banks P S, Dinh L, Stuart B C, et al.. Short- pulse laser deposition of diamond- like carbon thin films[J]. Appl Phys 1999, 69(1): S347-S353.

[8] Jung H S, Park H H. The correlation between the laser energy density and the properties of diamond-like carbon films with Nd∶YAG (355 nm) excimer laser[J]. Journal of the Korean Physical Society, 1998, 33: S423-S426.

[9] Schwan J, Ulrich S, Theel T, et al.. Stress-induced formation of high-density amorphous carbon thin films[J]. Journal of Applied Physics, 1997, 82(6): 6024-6031.

[10] Bonelli M, Ferrari A C, Fioravanti A P, et al.. Structural and mechanical properties of diamond- like carbon films prepared by pulsed laser deposition with varying laser intensity[J]. Mat Res Soc Symp Proc, 2000, 593(3): 359-364.

[11] Yang Xue, Wang Yiping, Guo Yanlong, et al.. Key technology research for infrared transmittance of DLC film prepared by pulse laser deposition[J]. Infrared and Laser Engineering, 2011, 40(1): 24-27.

[12] Cheng Yong, Guo Yanlong, Wang Shuyun, et al.. Optical application of diamond like carbon film deposited on Si substrate by pulsed laser[J]. Infrared and Laser Engineering, 2010, 39(5): 576-579.

[13] Guo Y L, Wang S Y, Wang X B, et al.. Excimer pulsed laser deposition of diamond- like carbon film[C]. SPIE, 2009: 73811U.

[14] Wang S Y, Guo Y L, Wang X B, et al.. Infrared anti- reflection DLC film by Femtosecond pulded laser deposition[C]. SPIE, 2009: 73820R.

[15] Yang Xue, Cheng Yong, Guo Yanlong, et al.. Research of new technology for large area and uniformly DLC film obtained by PLD[J]. Infrared and Laser Engineering, 2009, 38(S1): 452-454.

[16] De B A, Rau J V, Santagata A, et al.. Diamond-like carbon thin films produced by femtosecond pulsed laser deposition of fullerite[J]. Surface & Coatings Technology, 2011, 205(12): 3747-3753.

[17] Miller D C, Herrmann C F, Maier H J, et al.. Thermo- mechanical evolution of multilayer thin films: Part I mechanical behavior of Au/Cr/Si microcantilevers[J]. Thin Solid Films, 2007, 515(6): 3208-3223.