[1] S J Zhang, S To. A theoretical and experimental investigation into multimode tool vibration with surface generation in ultraprecision diamond turning [J]. International Journal of Machine Tools & Manufacture, 2013, 72: 32-36.
[2] Paul Dumas, Don Golini, Marc Tricard. Improve figure and finish of diamond turned surfaces with magneto-rheological finishing (MRF) [C]. SPIE, 2005, 5786: 296-304.
[3] Y Namba, T Shimomura, A Fushiki, et al.. Ultra- precision polishing of electroless nickel molding dies for shorter wavelength applications [J]. CIRP Annals-Manufacturing Technology, 2008, 57(1): 337-340.
[4] Zhu Zhiwei. A Novel Turning Method and Its Device Development for Suppressing Scattering Effects [D]. Changchun: Jilin University, 2013. 8-10.
[5] Zhiwei Zhu, Xiaoqin Zhou, Dan Luo, et al.. Development of pseudo-random diamond turning method for fabricating freeform optics with scattering homogenization [J]. Opt Express, 2013, 21(23): 28470-28482.
[6] K S Chon, Y Namba, K H Yoon. Precision machining of electroless nickel mandrel and fabrication of replicated mirrorsfor a soft Xray microscope [J]. JSME Int J Ser C, 2006, 49(1): 56-62.
[7] Anthony Beaucamp, Yoshiharu Namba, Super-smooth finishing of diamond turned hard X-ray molding dies by combined fluid jet and bonnet polishing [J]. CIRP Annals-Manufacturing Technology, 2013, 62(1): 315-318.
[8] Z Z Li, J M Wang, X Q Peng, et al.. Removal of single point diamond-turning marks by abrasive jet polishing [J]. Appl Opt, 2011, 50(16): 2458-2463.
[9] Zhang Jian, Dai Lei, Wang Fei, et al.. Restraint of mid-spatial-frequency error aspheric surface by small-tool adaptive polishing [J]. Acta Optica Sinica, 2013, 33(8): 0822002.
[10] Ma Zhanlong, Sui Yongxin. Large optical surface error figuring by ion beam [J]. Acta Optica Sinica, 2014, 34(1): 0122001.
[11] Zhang Feng. Combined type polishing of silicon modification layer on silicon carbide mirror for space camera [J]. Chinese J Lasers, 2013, 40(7): 0716001.
[12] Sorana D Bolboaca, Lorentz Jantschi. Design of experiments: useful orthogonal arrays for number of experiments from 4 to 16 [J]. Entropy, 2007, 9(4): 198-232.
[13] W H Yang, Y S Tarng. Design optimization of cutting parameters for turning operations based on the Taguchi method [J]. J Mater Process Technol, 1998, 84(1): 122-129.
