• Photonic Sensors
  • Vol. 5, Issue 2, 116 (2015)
Guina WANG1、2、*, Jie ZENG1, Hao MU3, and and Dakai LIANG1
Author Affiliations
  • 1State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China
  • 2College of Mechanical and Electrical Engineering, Soochow University, Suzhou, 215021, China
  • 3Nanjing Jilong Optical Communication Co., Ltd, Nanjing, 210000, China
  • show less
    DOI: 10.1007/s13320-015-0195-6 Cite this Article
    Guina WANG, Jie ZENG, Hao MU, and Dakai LIANG. Fiber Bragg Grating Sensor Network Optimization[J]. Photonic Sensors, 2015, 5(2): 116 Copy Citation Text show less
    References

    [1] J. Lee, S. Lee, and D. Yoon, “Simultaneous multipoint acoustic emission sensing using fibre acoustic wave grating sensors with identical spectrum,” Journal of Optics A: Pure and Applied Optics, 2008, 10(8): 085307-1-085307-3.

    [2] S. N. Vecherin, D. K. Wilson, and C. L. Pettit, “Optimal sensor placement with terrain-based constraints and signal propagation effects,” in Proc. SPIE, vol. 7333, pp. 73330S-1-73330S-12, 2009.

    [3] S. Saad and L. Hassine. “Hydrogen detection with FBG sensor technology for disaster prevention,” Photonic Sensors, 2013, 3(3): 214-223.

    [4] C. K. Y. Leung, K. T. Wan, D. Inaudi, X. Bao, W. Habel, Z. Zhou, et al., “Michio imai review: optical fiber sensors for civil engineering applications,” Materials and Structures, 2013, 48(4): pp. 871-906.

    [5] G. Tsamasphyros, N. Furnarkis, G. Kanderakis, and Z. Marioli-Riga, “Optimization of embedded optical sensor location in composite repairs,” Applied Composite Materials, 2003, 10(3): 129-140.

    [6] T. Hisada, “Recent progress in nonlinear FEM-based sensitivity analysis,” JSME International Journal Series A, 1995, 38(3): 301.

    [7] Z. Du, “The relationship between prediction accuracy and correlation coefficient,” Solar Phys, 2011, 270(1): 407-416.

    [8] Y. M. Grigorenko and A. Y. Grigorenko, “Static and dynamic problems for anisotropic inhomogeneous shells with variable parameters and their numerical solution,” International Applied Mechanics, 2013, 49(2): 123-193.

    [9] A. Panopoulou, S. Fransen, V. Gomez-Molinero, and V. Kostopoulos, “Experimental modal analysis and dynamic strain fiber Bragg gratings for structural health monitoring of composite antenna sub-reflector,” CEAS Space Journal, 2013, 5(1-2): 57-73.

    [10] V. N. Stroitelev, P. G. Shabanov, and T. V. Shaposhnikova, “Effects of error variation in means of measurement on reliability parameters in engineering-system monitoring,” Measurement Techniques, 1994, 37(1): 18-21.

    [11] F. Berghmans, S. Eve, and M. Held, “An introduction to reliability of optical components and fiber optic sensors,” in Optical Waveguide Sensing and Imaging NATO Science for Peace and Security Series 2008, pp. 73-100, 2008.

    [12] A. Othonos, “Bragg gratings in optical fibers: fundamentals and applications,” in Optical Fiber Sensor Technology 2000, pp. 79-187, 2000.

    [13] S. Bhalla, Y. W. Yang, and C. K. Soh. “Monitoring of rocks and underground structures using PZT and FBG sensors,” in Smart Materials in Structural Health Monitoring Control and Biomechanics Advanced Topics in Science and Technology in China 2012, pp. 481-499, 2012.

    [14] Y. Gong, C. Gan, C. Wu, and R. Wang, “Novel cobweb-topology WDM access network architecture featuring ultra-high reliability and easy scalability,” Optical and Quantum Electronics, 2014, 46(8): 999-1019.

    [15] E. Rizk, H. Marzouk, A. Hussein, and X. Gu, “Structural health monitoring of slab-column connections using FBG sensors,” Journal of Civil Structural Health Monitoring, 2012, 2(1): 17-27.

    [16] H. Murayama, D. Wada, and H. Igawa, “Structural health monitoring by using fiber-optic distributed strain sensors with high spatial resolution,” Photonic Sensors, 2013, 3(4): 355-376.

    Guina WANG, Jie ZENG, Hao MU, and Dakai LIANG. Fiber Bragg Grating Sensor Network Optimization[J]. Photonic Sensors, 2015, 5(2): 116
    Download Citation