• Infrared and Laser Engineering
  • Vol. 45, Issue 2, 206002 (2016)
Yu Zhaoan1、*, Yao Zhihong1, Liang Shengfa1, Zhang Jinchuan2, and Lv Tieliang3
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    DOI: 10.3788/irla201645.0206002 Cite this Article
    Yu Zhaoan, Yao Zhihong, Liang Shengfa, Zhang Jinchuan, Lv Tieliang. A fast driving technique for narrow pulsed quantum cascade lasers with frequency compensation[J]. Infrared and Laser Engineering, 2016, 45(2): 206002 Copy Citation Text show less
    References

    [1] Kosterev A, Wysocki G, Bakhirkin Y, et al. Application of quantum cascade lasers to trace gas analysis[J]. Applied Physics B-Lasers and Optics, 2008, 90(2): 165-176.

    [2] Ren W, Farooq A, Davidson D F, et al. CO concentration and temperature sensor for combustion gases using quantum-cascade laser absorption near 4.7 μm[J]. Applied Physics B-Lasers and Optics, 2012, 107(3): 849-860.

    [3] Namjou K, Cai S, Whittaker E A. Sensitive absorption spectroscopy with a room-temperature distributed-feedback quantum-cascade laser[J]. Optics Letters, 1998, 23(3): 219-221.

    [4] Manne J. Trace gas sensing with pulsed,distributed feedback quantum cascade laser[D]. Alberta: University of Alberta, 2009.

    [5] Sandip P, Ozanyan K B, McCann H. A spectroscopic study for detection of carbon-monoxide using mid-infrared techniques for single-pass measurement[C]// Third International Conference on Optical and Laser Diagnostics, 2007: 012020.

    [6] Lu Kai, Liu Baiyu, Bai Yonglin, et al. High power laser diode drive power supply[J]. Infrared and Laser Engineering, 2012, 41(10): 2680-2684. (in Chinese)

    [7] Wang Jinhua, Yao Hongbao, Liu Zixing. Analysis of laser emitting circuit with high-power and short-pulse[J]. Infrared and Laser Engineering, 2010, 39(6): 1049-1054. (in Chinese)

    [8] Yu Zhaoan, Lv Tieliang, Yao Zhihong, et al. Model and simulation of driving circuits in pulsed quantum cascade lasers[J]. Opt Precision Eng, 2013, 21(S): 120-127. (in Chinese)

    [9] Lin M S, Chen C L. An LED driver with pulse current driving technique[J]. IEEE Trans Power Electron, 2012, 27(11) : 4594-4601.

    [10] Lun W K, LooK H, Siew-Chong Tan, et al. Bilevel current driving technique for LEDs[J]. IEEE Trans Power Electron, 2009, 24(12): 2920-2932.

    [11] Carter B, Brown T R. Handbook of Operational Amplifier Applications[M]. US: Texas Instruments, 2001.

    [12] Franco S. Design with Operational Amplifiers and Analog Integrated Circuits[M]. New York: McGraw-Hill, 1988.

    [13] Alpes Lasers. Quantum cascade laser user's manual[DB/OL].[2015-02-11]. http://www.alpeslasers.ch.

    [14] LDP-3830 independent current limit[DB/OL]. [2015-01-10].http://www.newport.com/Pulsed-Lased-Diode-Driver,-LDP-3830/1013450/1033/info.aspx#tab_Literature.

    [15] Zhang Xingliang, Guo Lihong, Zhang Chuansheng, et al. Design of high-voltage pulse trigger system for CO2 laser[J]. Chinese Optics, 2012, 5(4): 416-422. (in Chinese)

    [17] Lytkine A, Manne J, Jager W, et al. Characterization of a 10.3μm pulsed DFB quantum cascade laser[J]. Spectrochimica Acta Part A, 2006, 63(5): 947-951.

    Yu Zhaoan, Yao Zhihong, Liang Shengfa, Zhang Jinchuan, Lv Tieliang. A fast driving technique for narrow pulsed quantum cascade lasers with frequency compensation[J]. Infrared and Laser Engineering, 2016, 45(2): 206002
    Download Citation