[1] Wang Ganchang. Suggestion of neutron generation with powerful lasers[J]. Chinese Journal of Lasers, 22, 7(1987).

[2] Hogan W J, Moses E I, Warner B E. The National Ignition Facility[J]. Optical Engineering, 43, 21-51(2002).

[3] Zheng Wanguo, Zhang Xiaomin, Wei Xiaofeng, et al. Status of the SGⅢ solidstate laser facility[C]The Fifth International Conference on Inertial Fusion Sciences Applications, 2008, 112: 032009.

[4] Campbell J H, HawleyFedder R A, Stolz C J, et al. NIF optical materials fabrication technologies: an overview[C]Proc of SPIE. 2004, 5341: 118.

[5] Baisden P A, Atherton L J, Hawley RA. Large optics for the National Ignition Facility[J]. Fusion Science & Technology, 69, 614-620(2016).

[6] Suratwala T I, Miller P E, Bude J D. HF based etching processes for improving laser damage resistance of fused silica optical surfaces[J]. Journal of the American Ceramic Society, 94, 416-428(2011).

[7] Wood R M. Laserinduced damage of optical materials[M].London: Institute of Physics Publishing, 2003.

[8] Liao Wenlin, Dai Yifan, Xie Xuhui. Morphology evolution of fused silica surface during ion beam figuring of high-slope optical components[J]. Applied Optics, 52, 3719-3725(2013).

[9] Liao Wenlin, Dai Yifan, Xie Xuhui. Nanopatterning of optical surfaces during low-energy ion beam sputtering[J]. Optical Engineering, 53, 065108(2014).

[10] Liao Wenlin, Dai Yifan, Xie Xuhui. Deterministic ion beam material adding technology for high-precision optical surfaces[J]. Applied Optics, 52, 1302-1309(2013).

[11] Liao Wenlin, Dai Yifan, Xie Xuhui. Combined figuring technology for high-precision optical surfaces using a deterministic ion beam material adding and removal method[J]. Optical Engineering, 52, 010503(2013).

[12] Peng Wenqiang, Guan Chaoliang, Li Shengyi. Ultrasmooth surface polishing based on the hydrodynamic effect[J]. Applied Optics, 52, 6411-6416(2013).

[13] Peng Wenqiang, Li Shengyi, Guan Chaoliang. Ultra-precision optical surface fabricated by hydrodynamic effect polishing combined with magnetorheological finishing[J]. Optik, 156, 374-383(2018).

[14] Peng Wenqiang, Guan Chaoliang, Li Shengyi, et al. The improvement of laser induced damage resistance of optical wkpiece surface by hydrodynamic effect polishing[C]Proc of SPIE. 2016: 968315.

[15] Nie Xuqing, Li Shengyi, Shi Feng. Generalized numerical pressure distribution model for smoothing polishing of irregular midspatial frequency errors[J]. Applied Optics, 53, 1020-1027(2014).

[16] Nie Xuqing, Li Shengyi, Hu Hao. Control of mid-spatial frequency errors considering the pad groove feature in smoothing polishing process[J]. Applied Optics, 53, 6332-6339(2014).

[17] Nie Xuqing, Li Shengyi, Song Ci, et al. Combined fabrication process f highprecision aspheric surface based on smoothing polishing magheological finishing[C]Proc of SPIE. 2014: 928111.

[18] Shi Feng, Shu Yong, Dai Yifan. Magnetorheological elastic super-smooth finishing for high-efficiency manufacturing of ultraviolet laser resistant optics[J]. Optical Engineering, 52, 075104(2013).

[19] Shi Feng, Tian Ye, Peng Xiaoqiang. Combined technique of elastic magnetorheological finishing and HF etching for high-efficiency improving of the laser-induced damage threshold of fused silica optics[J]. Applied Optics, 53, 598-604(2014).

[20] Shi Feng, Zhong Yaoyu, Dai Yifan. Investigation of surface damage precursor evolutions and laser-induced damage threshold improvement mechanism during Ion beam etching of fused silica[J]. Optics Express, 24, 20842-20854(2016).

[21] Xu Mingjin, Dai Yifan, Zhou Lin. Investigation of surface characteristics evolution and laser damage performance of fused silica during ion-beam sputtering[J]. Optical Materials, 58, 151-157(2016).

[22] Xu Mingjin, Shi Feng, Zhou Lin. Investigation of laser-induced damage threshold improvement mechanism during ion beam sputtering of fused silica[J]. Optics Express, 25, 29260-29271(2017).