[1] Liu G R, Wu D, Yao C Y et al. Application and development of advanced materials and processing technology in aerospace vehicle structure[J]. Aerospace Materials & Technology, 51, 1-9(2021).

[2] Ni J T, Zhou Q J, Yi F et al. Development of laser additive manufacturing technology and its application progress in aerospace field[J]. Chinese Journal of Rare Metals, 46, 1365-1382(2022).

[3] Wang H M. Materials fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 35, 2690-2698(2014).

[4] Wang H M, Zhang S Q, Wang X M. Progress and challenges of laser direct manufacturing of large titanium structural components (invited paper)[J]. Chinese Journal of Lasers, 36, 3204-3209(2009).

[5] Zhou Q J, Yan Z Y, Han X et al. Microstructure and mechanical properties of laser melting deposited TC11 titanium alloys[J]. Chinese Journal of Lasers, 45, 1102005(2018).

[6] Yan Z Y, Zhou Q J, Hou Y F et al. Effect of interlayer residence time on microstructures and mechanical properties of laser melting deposited TC11 titanium alloys[J]. Chinese Journal of Lasers, 45, 1102003(2018).

[7] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[8] Gu D D, Shi X Y, Poprawe R et al. Material-structure-performance integrated laser-metal additive manufacturing[J]. Science, 372, eabg1487(2021).

[9] Blakey-Milner B, Gradl P, Snedden G et al. Metal additive manufacturing in aerospace: a review[J]. Materials & Design, 209, 110008(2021).

[10] Tan C L, Weng F, Sui S et al. Progress and perspectives in laser additive manufacturing of key aeroengine materials[J]. International Journal of Machine Tools and Manufacture, 170, 103804(2021).

[11] Tian X Y, Wu L L, Gu D D et al. Roadmap for additive manufacturing: toward intellectualization and industrialization[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1, 100014(2022).

[12] Kerstens F, Cervone A, Gradl P. End to end process evaluation for additively manufactured liquid rocket engine thrust chambers[J]. Acta Astronautica, 182, 454-465(2021).

[13] Gradl P, Cervone A, Colonna P. Integral channel nozzles and heat exchangers using additive manufacturing directed energy deposition NASA HR-1 alloy[EB/OL]. https:∥ntrs.nasa.gov/citations/20220013530.htm

[14] Gradl P, Waller D, Fedotowsky T et al. Advancing additively manufactured Al 6061 RAM2 using laser powder directed energy deposition[EB/OL]. https:∥ntrs.nasa.gov/citations/20230015016.htm

[15] Zhao T, Wang Y H, Xu T S et al. Some factors affecting porosity in directed energy deposition of AlMgScZr-alloys[J]. Optics & Laser Technology, 143, 107337(2021).

[16] Wang A, Wei Q L, Tang Z J et al. Effects of processing parameters on pore defects in blue laser directed energy deposition of aluminum by in and ex situ observation[J]. Journal of Materials Processing Technology, 319, 118068(2023).

[17] Tang Z J, Wei Q L, Gao Z Y et al. 2000W Blue laser directed energy deposition of AlSi7Mg: process parameters, molten pool characteristics, and appearance defects[J]. Virtual and Physical Prototyping, 18, 2120405(2023).

[18] Wang A, Wei Q L, Luo S et al. Blue laser directed energy deposition of aluminum with synchronously enhanced efficiency and quality[J]. Additive Manufacturing Letters, 5, 100127(2023).

[19] Wang M J, Kashaev N. On the optimal process window for powder-based laser-directed energy deposition of AA7050 under different robot programs and scanning strategies[J]. Journal of Manufacturing Processes, 90, 286-299(2023).

[20] Wang Z H, Lin X, Kang N et al. Directed energy deposition additive manufacturing of a Sc/Zr-modified Al-Mg alloy: effect of thermal history on microstructural evolution and mechanical properties[J]. Materials Science and Engineering: A, 802, 140606(2021).

[21] Hua Q, Wang W J, Li R D et al. Microstructures and mechanical properties of Al-Mg-Sc-Zr alloy additively manufactured by laser direct energy deposition[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1, 100057(2022).

[22] Shi S Q, Lin X, Wang L L et al. Investigations of the processing-structure-performance relationships of an additively manufactured AlSi10Mg alloy via directed energy deposition[J]. Journal of Alloys and Compounds, 944, 169050(2023).

[23] Xiao X, Guo Y J, Zhang R F et al. Achieving uniform plasticity in a high strength Al-Mn-Sc based alloy through laser-directed energy deposition[J]. Additive Manufacturing, 60, 103273(2022).

[24] Xu H, Ren W J, Ma C Y et al. Laser-directed energy deposition of ZrH2 particles reinforced Al7075 alloy: cracks elimination and strength enhancement[J]. Additive Manufacturing, 78, 103877(2023).

[25] Fu R, Liang Y J, Han Q F et al. Strengthening and fracturing mechanisms of laser-directed energy deposited Al-7075 alloy[J]. Materials Science and Engineering: A, 881, 145433(2023).

[26] Li Y, Wang Y H, Hu L et al. Nanoscale engineering of low-misfit TiB2/Al3(Sc, Zr)/α-Al multi-interface to improve strength-ductility synergy for direct energy deposited aluminum alloy[J]. Additive Manufacturing, 79, 103913(2024).

[27] Wolff S J, Wang H, Gould B et al. In situ X-ray imaging of pore formation mechanisms and dynamics in laser powder-blown directed energy deposition additive manufacturing[J]. International Journal of Machine Tools and Manufacture, 166, 103743(2021).

[28] Wang H, Pfefferkorn F E, Wolff S J. Investigation of pore formation mechanisms induced by spherical-powder delivery in directed energy deposition using in situ high-speed X-ray imaging[J]. Additive Manufacturing Letters, 3, 100050(2022).

[29] Carroll B E, Palmer T A, Beese A M. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing[J]. Acta Materialia, 87, 309-320(2015).

[30] Zhu Y Y, Tian X J, Li J et al. The anisotropy of laser melting deposition additive manufacturing Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J]. Materials & Design, 67, 538-542(2015).

[31] Huang P, Guo N, Zhao W et al. Synergistic and competitive mechanisms of plastic anisotropy in high-efficiency laser melting deposited TC11 alloy[J]. Materials Science and Engineering: A, 874, 145067(2023).

[32] Zhang D Y, Qiu D, Gibson M A et al. Additive manufacturing of ultrafine-grained high-strength titanium alloys[J]. Nature, 576, 91-95(2019).

[33] Song T T, Chen Z B, Cui X Y et al. Strong and ductile titanium-oxygen-iron alloys by additive manufacturing[J]. Nature, 618, 63-68(2023).

[34] Zhang H, Zhang L, Chen H et al. Complete fine-equiaxed β-columnar grains in laser direct energy deposition of Ti-6Al-4V parts[J]. Journal of Materials Research and Technology, 26, 4059-4069(2023).

[35] Chen H, Zhang H, Gao H R et al. Effects of pulsed frequency on the microstructure characteristics and properties of Ti6Al4V laser melting deposition additive manufacturing parts[J]. Journal of Materials Research and Technology, 28, 53-65(2024).

[36] Todaro C J, Easton M A, Qiu D et al. Grain structure control during metal 3D printing by high-intensity ultrasound[J]. Nature Communications, 11, 142(2020).

[37] Tian X N, Zhu Y M, Lim C V S et al. Isotropic and improved tensile properties of Ti-6Al-4V achieved by in situ rolling in direct energy deposition[J]. Additive Manufacturing, 46, 102151(2021).

[38] Liu H Q, Fang M H, Han Y F et al. Achieving strength-ductility combination and anisotropy elimination in additively manufactured TiB/Ti6Al4V by in situ synthesized network architecture with fine grains[J]. Composites Part B: Engineering, 262, 110822(2023).

[39] Xu J J, Lin X, Guo P F et al. The effect of preheating on microstructure and mechanical properties of laser solid forming IN-738LC alloy[J]. Materials Science and Engineering: A, 691, 71-80(2017).

[40] Xu J J, Lin X, Guo P F et al. The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy[J]. Journal of Alloys and Compounds, 749, 859-870(2018).

[41] Hu Y L, Lin X, Song K et al. Effect of heat input on cracking in laser solid formed DZ4125 superalloy[J]. Optics & Laser Technology, 86, 1-7(2016).

[42] Zhou Z P, Huang L, Shang Y J et al. Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing[J]. Materials & Design, 160, 1238-1249(2018).

[43] Hu Y L, Lin X, Yu X B et al. Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing[J]. Journal of Alloys and Compounds, 711, 267-277(2017).

[44] Wei Q S, Xie Y, Teng Q et al. Crack types, mechanisms, and suppression methods during high-energy beam additive manufacturing of nickel-based superalloys: a review[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1, 100055(2022).

[45] Chen Y, Lu F G, Zhang K et al. Investigation of dendritic growth and liquation cracking in laser melting deposited Inconel 718 at different laser input angles[J]. Materials & Design, 105, 133-141(2016).

[46] Chen Y, Lu F G, Zhang K et al. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling[J]. Journal of Alloys and Compounds, 670, 312-321(2016).

[47] Näkki J, Tuominen J, Vuoristo P. Effect of minor elements on solidification cracking and dilution of alloy 625 powders in laser cladding[J]. Journal of Laser Applications, 29, 012014(2017).

[48] Aziz M J. Model for solute redistribution during rapid solidification[J]. Journal of Applied Physics, 53, 1158-1168(1982).

[49] Xiao H, Li S M, Han X et al. Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing[J]. Materials & Design, 122, 330-339(2017).

[50] Sui S, Chen J, Ma L et al. Microstructures and stress rupture properties of pulse laser repaired Inconel 718 superalloy after different heat treatments[J]. Journal of Alloys and Compounds, 770, 125-135(2019).

[51] Hu Y L, Lin X, Li Y L et al. Influence of heat treatments on the microstructure and mechanical properties of Inconel 625 fabricated by directed energy deposition[J]. Materials Science and Engineering: A, 817, 141309(2021).

[52] Sui S, Tan H, Chen J et al. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing[J]. Acta Materialia, 164, 413-427(2019).

[53] Soltani-Tehrani A, Chen P S, Katsarelis C et al. Laser powder directed energy deposition (LP-DED) NASA HR-1 alloy: laser power and heat treatment effects on microstructure and mechanical properties[J]. Additive Manufacturing Letters, 3, 100097(2022).

[54] Wang H, Hu Y B, Ning F D et al. Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: effects of ultrasonic frequency on microstructural and mechanical properties[J]. Journal of Materials Processing Technology, 276, 116395(2020).

[55] Xi M Z, Zhou W, Shang J Y et al. Effect of heat treatment on microstructure and mechanical properties of consecutive point-mode forging and laser rapid forming GH4169 alloy[J]. Acta Metallurgica Sinica, 53, 239-247(2017).

[56] Zhang B C, Bi G J, Wang P et al. Microstructure and mechanical properties of Inconel 625/nano-TiB2 composite fabricated by LAAM[J]. Materials & Design, 111, 70-79(2016).

[57] Zhang B C, Bi G J, Chew Y et al. Comparison of carbon-based reinforcement on laser aided additive manufacturing Inconel 625 composites[J]. Applied Surface Science, 490, 522-534(2019).

[58] Song W J, Wang D Z, Tang C W et al. Effects of added tungsten on the microstructure and mechanical properties of laser-directed energy deposited Inconel 625 alloys[J]. Materials Science and Engineering: A, 883, 145481(2023).

[59] Tan C L, Li R S, Su J L et al. Review on field assisted metal additive manufacturing[J]. International Journal of Machine Tools and Manufacture, 189, 104032(2023).

[60] Ning F D, Hu Y B, Liu Z C et al. Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: microstructural and mechanical characterization[J]. Journal of Manufacturing Science and Engineering, 140, 061012(2018).

[61] Yuan D, Shao S Q, Guo C H et al. Grain refining of Ti-6Al-4V alloy fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration[J]. Ultrasonics Sonochemistry, 73, 105472(2021).

[62] Ning F D, Hu Y B, Cong W L. Microstructure and mechanical property of TiB reinforced Ti matrix composites fabricated by ultrasonic vibration-assisted laser engineered net shaping[J]. Rapid Prototyping Journal, 25, 581-591(2019).

[63] Li C, Hodgson P, Preuss M et al. Rolling-assisted direct energy deposited Inconel 718: microstructural evolution and mechanical properties after optimized heat treatment[J]. Journal of Materials Science & Technology, 144, 118-127(2023).

[64] Li C, Tian Y, Chen Y et al. Hierarchical layered and refined grain structure of Inconel 718 superalloy produced by rolling-assisted directed energy deposition[J]. Additive Manufacturing Letters, 1, 100009(2021).

[65] Zhou S Y, Liu Z Y, Yang G et al. Heterostructure microstructure and laves phase evolution mechanisms during inter-layer hammering hybrid directed energy deposition (DED) process[J]. Materials Science and Engineering: A, 886, 145668(2023).

[66] Zhou J T, Zhou X, Li H et al. In-situ laser shock peening for improved surface quality and mechanical properties of laser-directed energy-deposited AlSi10Mg alloy[J]. Additive Manufacturing, 60, 103177(2022).

[67] Du D F, Dong A P, Shu D et al. Influence of static magnetic field on the microstructure of nickel-based superalloy by laser-directed energy deposition[J]. Metallurgical and Materials Transactions A, 51, 3354-3359(2020).

[68] Zhao R X, Chen C Y, Shuai S S et al. Enhanced mechanical properties of Ti6Al4V alloy fabricated by laser additive manufacturing under static magnetic field[J]. Materials Research Letters, 10, 530-538(2022).

[69] Filimonov A M, Rogozin O A, Dubinin O N et al. Modification of mechanical properties in directed energy deposition by a static magnetic field: experimental and theoretical analysis[J]. Materials, 14, 5190(2021).

[70] Liu F C, Cheng H M, Yu X B et al. Control of microstructure and mechanical properties of laser solid formed Inconel 718 superalloy by electromagnetic stirring[J]. Optics & Laser Technology, 99, 342-350(2018).

[71] Li Z, Sui S, Ma X et al. High deposition rate powder- and wire-based laser directed energy deposition of metallic materials: a review[J]. International Journal of Machine Tools and Manufacture, 181, 103942(2022).

[73] Fraunhofer institute for laser technology. Annual report 2017[EB/OL]. https:∥www.ilt.fraunhofer.de/en/media-center/annual-report/archive.html

[74] Fraunhofer institute for laser technology. EHLA[EB/OL]. https:∥www.ilt.fraunhofer.de/en/press/press-releases/2021/10-27-ehla-3d-formnext-21.html

[75] Tang H B, Wu Y, Zhang S Q et al. Research status and development trend of high performance large metallic components by laser additive manufacturing technique[J]. Journal of Netshape Forming Engineering, 11, 58-63(2019).

[76] Gradl P, Cervone A, Colonna P. Influence of build angles on thin-wall geometry and surface texture in laser powder directed energy deposition[J]. Materials & Design, 234, 112352(2023).

[77] Gradl P R, Mireles O R, Protz C S et al[M]. Metal additive manufacturing for propulsion applications(2022).

[78] Zhang J C, Shi S H, Fu G Y et al. Analysis on surface finish of thin-wall parts by laser metal deposition with annular beam[J]. Optics Laser Technology, 119, 105605(2019).

[79] Zhang J C, Cao Y P, Wang H et al. Annular laser metal deposition of Ti-6Al-4V alloy in a semi-open environment: process optimization, microstructure and mechanical properties[J]. Optik, 286, 171014(2023).

[80] Feldhausen T, Raghavan N, Saleeby K et al. Mechanical properties and microstructure of 316L stainless steel produced by hybrid manufacturing[J]. Journal of Materials Processing Technology, 290, 116970(2021).

[81] Cai Z H, Zhu Y Q, Han C J et al. Effects of different process strategies on surface quality and mechanical properties of 316L stainless steel fabricated via hybrid additive-subtractive manufacturing[J]. Chinese Journal of Lasers, 50, 0802301(2023).

[82] Li D, Li P Q. Technological breakthroughs of LM-5 and future developments of Chinas launch vehicle[J]. Acta Aeronautica et Astronautica Sinica, 43, 160-171(2022).

[83] Xie Y, Zhou Q J, Yan Z Y et al. Effect of discrete deposition and segregated heat-treatment on the macro- and microstructure, and tensile properties of large-scale titanium alloy components by laser melting deposition[J]. Journal of Manufacturing Processes, 70, 427-437(2021).

[84] Xie Y, Zhou Q J, Yan Z Y et al. A laser additive manufacturing method for reducing cracking sensitivity[P].

[85] Zhou Q J, Yan Z Y, Ma C Q et al. A titanium alloy structural component and its laser melting deposition forming method[P].

[86] Xie Y, Zhou Q J, Yan Z Y et al. A laser additive manufacturing method that can conveniently obtain small equiaxed grains[P].

[87] Wang D, Deng G W, Yang Y Q et al. Research progress on additive manufacturing of metallic heterogeneous materials[J]. Journal of Mechanical Engineering, 57, 186-198(2021).

[88] Zhang B P, Zhang W Q, Xiao H F et al. QCr0.8 Cu alloy/S06 stainless steel bimetal structure via In718 multi-interlayer fabricated by laser powder hybrid additive manufacturing[J]. Journal of Materials Research and Technology, 24, 1034-1042(2023).

[89] Qin L Y, Wang K, Li X D et al. Review of the formation mechanisms and control methods of geometrical defects in laser deposition manufacturing[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1, 100052(2022).

[90] Turichin G, Zemlyakov E, Babkin K et al. Analysis of distortion during laser metal deposition of large parts[J]. Procedia CIRP, 74, 154-157(2018).