Fabrication of Optical Fiber Probes by Dynamic Chemical Etching Based on Siphon Principle

[in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]

[1] Zenobi R, Deckert V. Scanning near-field optical microscopy and spectropy as tool for chemical analysis. Angew. Chem. Int. Ed., 2000, 39(10):1746～1756

[2] Andrea J, Joachim K, Klaus W et al.. Scanning near-field optical microscopy in life science. Single. Mol., 2002, 3(4): 232～235

[4] Alkaisi M M, Blaikie R J, McNab S J. Nanolithography in the evanescent near field. Adv. Mater., 2001, 13(12～13): 877～887

[5] Novotny L, Pohl D W, Hecht B. Scanning near-field optical probe with ultrasmall spot size. Opt. Lett., 1995, 20(9): 970～972

[6] Lazarev A, Fang N, Luo Q et al.. Formation of fine near-field scanning optical microscopy tips. Part Ⅱ. By laser-heated pulling and bending. Rev. Sci. Instrum., 2003, 74(8): 3684～3688

[7] Muramatsu H, Homma K, Chiba N et al.. Dynamic etching method for fabrication a variety of tip shapes in the optical fibre probe of a scanning near-field optical microscope. J. Microsc., 1999, 194(2): 383～387

[8] Saiki T, Mononobe S, Ohtsu M. Tailoring a high-transmission fiber probe for photon scanning tunneling microscope. Appl. Phys. Lett., 1996, 68(19): 2612～2614

[9] Lazarev A, Fang N, Luo Q et al.. Formation of fine near-field scanning optical microscopy tips. Part Ⅰ. By static and dynamic chemical etching. Rev. Sci. Instrum., 2003, 74(8): 3679～3683

[10] Sun Jialin, Xu Jianhua, Tian Guangyan et al.. Fabrication and application of near-field optical fiber probe. Chin. Phys., 2001, 10(7): 631～635

[13] Hoffmann P, Dutoit B, Salathé R P et al.. Comparision of mechanically drawn and protection layer chemically etched optical fiber tips. Ultramicroscopy, 1995, 61: 165～170

CLP Journals