• Infrared and Laser Engineering
  • Vol. 44, Issue 11, 3238 (2015)
Jin Fangyuan1、2、*, Chen Bo1, E Shulin1, Wang Haifeng1, and Xing Yan1、2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: Cite this Article
    Jin Fangyuan, Chen Bo, E Shulin, Wang Haifeng, Xing Yan. Ablation rate of high frequency picosecond laser micromachining quartz substrated Al film[J]. Infrared and Laser Engineering, 2015, 44(11): 3238 Copy Citation Text show less
    References

    [1] Nolte S, Momma C, Jacobs H, et al. Ablation of metals by ultrashort laser pulses [J]. J Opt Soc Am B, 1997, 14(10):2716-2722.

    [2] Kim J, Na S. Metal thin film ablation with femtosecond pulsed laser[J]. Opt Laser Technol, 2007, 39(7): 1443-1448.

    [3] Comeau M G, Lewis L J. Ultrashort-pulse laser ablation nanocrystalline aluminum[J]. Phys Rev B, 2011, 84(22): 224110-1-16.

    [4] Shao Junfeng, Guo Jin, Wang Tingfeng. Theoretical research on dynamics of femtosecond laser ablation crystal silicon[J]. Infrared and Laser Engineering, 2014, 43(8): 2419-2424. (in Chinese)

    [5] Pietroy D, Maio Y D, Moine B, et al. Femtosecond laser volume ablation rate and threshold measurements by differential weighing[J]. Opt Exp, 2012, 20(28): 29900-29908.

    [6] Neuenschwander B, Jaeggi B, Schmid M, et al. Optimization of the volume ablation rate for metals at different laser duration from ps to fs[C]//SPIE, 2012, 8243: 824307.

    [7] Choi H W, Farson D F, Bovatsek J, et al. Direct-write patterning of indium-tin-oxide film by high pulse repetition frequency femtosecond laser ablation[J]. Appl Opt, 2007, 46(23): 5792-5799.

    [8] Bruneel D, Matras G, Harzic R Le, et al. Micromachining of metals with ultra-short Ti-Sapphire lasers: prediction and optimization of the processing time[J]. Opt Lasers Eng, 2010, 48(3): 268-271.

    [9] Maio Y D, Colombier J P, Cazottes P, et al. Ultrafast laser ablation characteristics of PZT ceramic: Analysis methods and comparison with metals[J]. Opt Lasers Eng, 2012, 50(11): 1582-1591.

    [10] Jin Fangyuan, Chen Bo, E Shulin, et al. Theory analysis and experiment verification on picosecond laser ablation of Al film[J]. Chin J Lumin, 2014, 35(6): 754-760. (in Chinese)

    [11] Harzic R Le, Breitling D, Weikert M, et al. Ablation comparison with low and high energy densities for Cu and Al with ultra-short pulses[J]. Appl Phys A, 2005, 80(7): 1589-1593.

    [12] Xiao S Z, Sch ps A, Ostendorf A. Selective ablation of thin films by ultrashort laser pulses[J]. Phys Proc, 2012, 39: 594-602.

    [13] Yang J, Zhao Y, Zhu X. Theoretical studies of ultrafast ablation of metal targets dominated by phase explosion[J]. Appl Phys A, 2007, 89(2): 571-578.

    Jin Fangyuan, Chen Bo, E Shulin, Wang Haifeng, Xing Yan. Ablation rate of high frequency picosecond laser micromachining quartz substrated Al film[J]. Infrared and Laser Engineering, 2015, 44(11): 3238
    Download Citation