Effect of Laser Remelting Path on Residual Stress and Surface Quality of Remanufactured Coatings

Jiasheng Wang; Linsen Shu

doi:10.3788/LOP220895

[1] Wu Y, Ma P Z, Bai W Q et al. Numerical simulation of temperature field and stress field in 316L/AISI304 laser cladding with different scanning strategies[J]. Chinese Journal of Lasers, 48, 2202002(2021).

[2] Zhang J, Zhang Q L, Li D et al. Effect of δ aging treatment on microstructure and tensile properties of repaired Inconel 718 alloy using laser additive[J]. Manufacturing Chinese Journal of Lasers, 47, 74-81(2020).

[3] Qiu B, Xing S M, Dong Q et al. Comparison of properties and impact abrasive wear performance of ZrO2-Al2O3/Fe composite prepared by pressure casting and infiltration casting process[J]. Tribology International, 142, 105979(2020).

[4] Ru J J, Jiang Y H, Zhou R et al. Preparation of Ni-encapsulated ZTA particles as precursors to reinforce iron-based composites[J]. Advanced Engineering Materials, 19, 1700268(2017).

[5] Liu J, Zhang T, Zhang Y T et al. Friction, wear and corrosion resistance of multi-layer electroless Ni-W-P coating on AZ91D magnesium alloy[J]. China Surface Engineering, 32, 53-62(2019).

[6] Wang J G, Gao S Y, Chen X S et al. Mechanical properties of A356 aluminum alloy after laser surface remelting[J]. Chinese Journal of Lasers, 47, 0402002(2020).

[7] Du H H, Zhao Y C, Huang L R et al. Influences of laser remelting paths on tribological property of Fe-based Ni/WC spraying coatings[J]. China Surface Engineering, 31, 152-160(2018).

[8] Chen S, Tao F H, Jia C Z et al. Effect of laser remelting on microstructure and properties of 4Cr5MoSiV1 steel fabricated by selective laser melting[J]. Surface Technology, 49, 209-219(2020).

[9] Ji X L, Gu P, Wang Z S et al. Effect of laser remelting on slurry erosion and corrosion properties of arc-sprayed Fe-based amorphous-containing coatings[J]. Surface Technology, 48, 68-74(2019).

[10] Ye X, Wu M P, Miao X J et al. Influence of laser remelting on forming quality of Ti-6Al-4V fabricated by selective laser melting[J]. Surface Technology, 50, 301-310(2021).

[11] An X L, Wang Y L, Jiang F L et al. Influence of lap ratio on temperature field and residual stress distribution of 42CrMo laser cladding[J]. Chinese Journal of Lasers, 48, 1002110(2021).

[12] Xie L Y, Shi W Q, Wu T et al. Numerical simulation of temperature field and stress field of laser cladding on curved substrate workpiece[J]. Surface Technology, 51, 296-303, 325(2022).

[13] Yasa E, Kruth J P. Microstructural investigation of selective laser melting 316L stainless steel parts exposed to laser re-melting[J]. Procedia Engineering, 19, 389-395(2011).

[14] Kempen K, Yasa E, Thijs L et al. Microstructure and mechanical properties of selective laser melted 18Ni-300 steel[J]. Physics Procedia, 12, 255-263(2011).

[15] Li G Q, Wang L F, Zhu G X et al. Influence of scanning patterns on residual stress of cladding layer and substrate deformation produced by hollow-ring laser cladding[J]. Surface Technology, 50, 158-170(2021).

[16] Han Y L, Qi J F, Cai Q et al. Research on measurement of residual stress of welded 5A06 aluminum alloy based on synchrotron radiation diffraction technology[J]. Rare Metal Materials and Engineering, 48, 205-212(2019).