[1] Xiong Shengming, Zhang Yundong, Tang Jinfa. Dielectric coating for deformable mirrors used in COIL laser system[J]. High Power Laser & Particle Beams, 2000, 12(1): 1175-1180. (in Chinese)
[2] Ye Xiaowen, Ding Tao, Cheng Xinbin, et al. Contrastive investigation of the residual stress of SiO2 films prepared by electron beam evaporation in different relative humidity environments[J]. Infrared and Laser Engineering, 2012, 41(3): 713-717. (in Chinese)
[3] Zhu Changchun, Zhao Hongpo, Han Jianqiang, et al. The residual stresses in MEMS thin films[J]. Micronanoelectronic Technology, 2003, 40(10): 30-34. (in Chinese)
[4] Miao Xinxiang, Yuan Xiaodong, Cheng Xiaofeng, et al. Thermal stress simulation of laser induced damage of fused silica by contamination on the surface[J]. Laser Technology, 2011, 35(2): 285-288. (in Chinese)
[5] Liu Zheng. Fatigue properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy produced by laser melting deposition[D]. Dalian: Dalian Jiaotong University, 2014. (in Chinese)
[6] Kanchanomai C, Limtrakarn W. Effect of residual stress on fatigue failure of carbonitrided low-carbon steel[J]. Journal of Materials Engineering & Performance, 2008, 17(6): 879-887.
[7] Luo Shuai, Chen Lixia, Zhang Bin. Influence of structural parameters of deformable mirror on its fatigue life[J]. Acta Optica Sinica, 2017, 37(10): 18-26. (in Chinese)
[8] Gao Chunxue. Study of the distribution and control of stress in optical thin films[D]. Nanjing: Southeast University, 2015. (in Chinese)
[9] Chen Lixia, Hu Xiaochuan, Zhang Bin, et al. Fatigue damage characteristics of deformable mirrors for wavefront correction[J]. Chinese Journal of Lasers, 2016, 43(11): 1105002. (in Chinese)
[10] Liu Yan, Jie Meng, Xie Haifeng, et al. Fatigue life of piezoelectric actuator used in resonance-type air pump[J]. Optics and Precision Engineering, 2013, 21(4): 941-947. (in Chinese)
[11] Wu Hao, Meng Yonggang, Su Caijun, et al. An out-chip method for measuring fatigue property of poly silicon thin film[J]. Journal of Harbin Institute of Technology, 2006, 38(4): 96-98+160. (in Chinese)
[12] Liu Guangtong. Atmospheric dust fall source analysis in hohhot[D]. Hohhot: Inner Mongolia University, 2008. (in Chinese)
[13] Hu Xiaochuan, Peng Jiaqi, Zhang Bin. Thermal distortion of deformable mirror and its influence on beam quality[J]. Chinese Journal of Lasers, 2015, 42(1): 0120004. (in Chinese)
[14] Li X D, Wang X N, Xiong Q H, et al. Mechanical properties of ZnS nanobelts[J]. Nano Letters, 2005, 5(10): 1982-1986.
[15] Wu Weibin, Dai Yifan, Guan Chaoliang, et al. Optimization design for transversal piezoelectric effect deformable mirror[J]. Infrared and Laser Engineering, 2016, 45(8): 0818003. (in Chinese)
[16] Peng Jiaqi, Hu Xiaochuan, Chen Lixia, et al. Effect of structural parameters of deformable mirrors on phase characteristics of high-power laser[J]. Acta Optica Sinica, 2015, 35(5): 0514001. (in Chinese)
[17] Zhang Yaoping. The study on infrared thin film of deformable mirror[D]. Chengdu: Institute of Optics and Electronics, Chinese Academy of Sciences, 2006. (in Chinese)
