Effect of Heat Treatment on Composition, Microstructure and Mechanical Property of Domestic KD-SA SiC Fibers

Shuang WU; Yanzi GOU; Yongshou WANG; Quzhi SONG; Qingyu ZHANG; Yingde WANG

doi:10.15541/jim20220548

[1] Q L AN, J CHEN, W W MING et al. Machining of SiC ceramic matrix composites: a review. Chinese Journal of Aeronautic, 540(2021).

[2] Q YUAN, Y C SONG. Research and development of continuous SiC fibers and SiC_f/SiC composities. Journal of Inorganic Materials, 1157(2016).

[3] P WANG, Q L WANG, X Y ZHANG et al. Oxidation behavior of SiC_f/SiC composites modified by layered-Y₂Si₂O₇ in wet oxygen environment. Journal of Inorganic Materials, 904(2019).

[4] X X LÜ, Z Y JIANG, Y R ZHOU et al. Effect of BN/SiC multilayered interphases on mechanical properties of SiC Fibers and minicomposites by PIP.. Journal of Inorganic Materials, 1099(2020).

[6] P WANG, F Q LIU, H WANG et al. A review of third generation SiC fibers and SiC_f/SiC composites. Journal of Materials Science and Technology, 2743(2019).

[7] A R BUNSELL, A PIANT. A review of the development of three generations of small diameter silicon carbide fibres. Journal of Materials Science, 823(2006).

[8] H INCHIKAWA. Polymer-derived ceramic fibers. Annual Review of Materials Research, 335(2016).

[9] J J SHA, T HINOKI, A KOHYAMA. Microstructural characterization and fracture properties of SiC-based fibers annealed at elevated temperatures. Journal of Materials Science, 5046(2007).

[10] J J SHA, T NOZAWA, J S PARK et al. Effect of heat treatment on the tensile strength and creep resistance of advanced SiC fibers. Journal of Nuclear Materials, 592(2004).

[11] T ISHIKAWA, Y KOHTOKU, K KUMAGAWA et al. High-strength alkali-resistant sintered SiC fibre stable to 2200 ℃. Nature, 773(1998).

[12] J HUGUST-GARCIA, A JANKOWIAK, S MIRO et al. Ion irradiation effects on third generation SiC fibers in elastic and inelastic energy loss regimes. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 93(2014).

[13] Y Z GOU, K JIAN, H WANG et al. Fabrication of nearly stoichiometric polycrystalline SiC fibers with excellent high- temperature stability up to 1900 ℃. Journal of the American Ceramic Society, 2050(2018).

[15] S Y CAO, J WANG, H WANG. Effect of heat treatment on the microstructure and tensile strength of KD-II SiC fibers. Materials Science and Engineering A, 55(2016).

[16] P R WANG, Y Z GOU, H WANG et al. Revealing the formation mechanism of the skin-core structure in nearly stoichiometric polycrystalline SiC fibers. Journal of the European Ceramic Society, 2295(2020).

[17] Y ZHANG, C L WU, Y D WANG et al. A detailed study of the microstructure and thermal stability of typical SiC fibers. Materials Characterization, 91(2018).

[18] R USUKAWA, T ISHIKAWA. Effect of Al contained in polymer- derived SiC crystals on creating stable crystal grain boundaries. International Journal of Applied Ceramic Technology, 6(2021).

[19] W WEIBULL, SWEDEN STOCKHOLM,. A statistical distribution function of wide applicability. Journal of Applied Mechanics: Transactions of the ASME, 293(1951).

[21] T ISHIKAWA, H ODA. Defect control of SiC polycrystalline fiber synthesized from poly-aluminocarbosilane. Journal of the European Ceramic Society, 3657(2016).

[22] S Y CAO, J WANG, H WANG. Formation mechanism of large SiC grains on SiC fiber surfaces during heat treatment. CrystEngComm, 3674(2016).