• Journal of Inorganic Materials
  • Vol. 34, Issue 6, 605 (2019)
Xing-Peng LIU, Bin PENG, Wan-Li ZHANG, and Jun ZHU
Author Affiliations
  • School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
  • show less
    DOI: 10.15541/jim20180352 Cite this Article
    Xing-Peng LIU, Bin PENG, Wan-Li ZHANG, Jun ZHU. Al2O3 Coating Layer on the High Temperature Conductive Stability of Pt/ZnO/Al2O3 Film Electrode[J]. Journal of Inorganic Materials, 2019, 34(6): 605 Copy Citation Text show less
    References

    [1] C ALEEE, L VULPESCU, P COUSSEAU et al. Microsystem for high-temperature gas phase reactions. Meas. Control, 33, 265-268(2000).

    [2] R ARANA L, B SCHAEVITZ S, J FRANZ A et al. A microfabricated suspended-tube chemical reactor for thermally efficient fuel processing. Micr. Syst, 12, 600-612(2003).

    [3] V PATEL S, M DIBATTISTA, L GLAND J et al. Survivability of a silicon-based microelectronic gas-detector structure for high-temperature flow applications. Sens. Actu. B, 37, 27-35(1996).

    [4] D BRIAND, F BEAUDOIN, J COURBAT et al. Failure analysis of micro-heating elements suspended on thin membranes. Micr.Reli, 45, 1786-1789(2005).

    [5] J COURBAT, D BRIAND, N F DE ROOIJ et al. Reliability improvement of suspended platinum-based micro-heating elements. Sens. Actu.A, 142, 284-291(2008).

    [6] H ESCH, G HUYBERECHTS, R MERTENS et al. The stability of Pt heater and temperature sensing elements for silicon integrated tin oxide gas sensors. Sens. Actu.B, 65, 190-192(2000).

    [7] A KANG, R ZHANG C, J JIA X et al. SAW-RFID enabled temperature sensor. Sens. Actu. A Phys, 201, 105-113(2013).

    [8] G RODRIGUEZ-MADRID J, F IRIARTE G, A WILLIAMSB O et al. High precision pressure sensors based on SAW devices in the GHz range. Sens. Actu.A, 189, 364-369(2013).

    [9] L SHU, B PENG, B YANG Z et al. High-temperature SAW wireless strain sensor with langasite. Sensors, 15, 28531-28542(2015).

    [10] W MROSK J, L BERGER, C ETTL et al. Materials issues of SAW sensors for high-temperature applications. IEEE Trans. Ind.Electron, 48, 258-264(2001).

    [11] M BAO S, B KE Y, Q ZHENG Y et al. A method for achieving monotonic frequency-temperature response for langasite surface- acoustic-wave high-temperature sensor. Jpn. J. Appl. Phys, 55(2016).

    [12] V THOMPSON C. Solid-state dewetting of thin films. Annu. Rev. Mater. Res, 42, 399-434(2012).

    [13] S SAKHAROV, A ZABELIN, A MEDVEDEV et al. Technological Process and Resonator Design Optimization of Ir/LGS High Temperature SAW Devices. IEEE International Ultrasonics Symposium Proceedings, 1632-1635(2014).

    [14] T AUBERT, O ELMAZRIA, J BARDONG et al. Iridium Interdigital Transducers for Ultra-high-temperature SAW Devices. IEEE International Ultrasonics Symposium Proceedings, 2065-2068(2011).

    [15] A TAGUETT, T AUBERT, M LOMELLO et al. Ir-Rh thin films as high-temperature electrodes for surface acousticwave sensor applications. Sens. Actu.A, 243, 35-42(2016).

    [16] K RANE G, M SEIFERT, S MENZEL et al. Tungsten as a chemically-stable electrode material on ga-containing piezoelectric substrates langasite and catangasite for high-temperature SAW devices. Materials, 9, 101(2016).

    [17] K RANE G, S MENZEL, M SEIFERT et al. Tungsten/ molybdenum thin films for application as interdigital transducers on high temperature stable piezoelectric substrates La3Ga5SiO14 and Ca3TaGa3Si2O14. Materials Science and Engineering B, 202, 31-38(2015).

    [18] C MOULZOL S, J FRANKEL D, CUNHA M PEREIRA DA et al. Electrically conductive Pt-Rh/ZrO2 and Pt-Rh/HfO2 nanocomposite electrodes for high temperature harsh environment sensors. Proc of.SPIE, 8763, 87630F(2013).

    [19] T AUBERT, O ELMAZRIA, B ASSOUAR et al. Surface acoustic wave devices based on AlN/sapphire structure for high temperature applications. Appl. Phys. Lett, 96(2010).

    [20] T AUBERT, O ELMAZRIA, B ASSOUAR et al. Behavior of platinum/tantalum as interdigital transducers for SAW devices in high-temperature environments. IEEE Transactions on Ultrasonics, Ferroelectrics,. and Frequency Control, 58, 603-610(2011).

    [21] T AUBERT, O ELMAZRIA, B ASSOUAR et al. Investigations on AlN/Sapphire piezoelectric bilayer structure for high-temperature SAW applications. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 59, 999-1005(2012).

    [22] O ELMAZRIA, T AUBERT. Wireless SAW sensor for high temperature applications: material point of view. Proc. of SPIE, 8066(2011).

    [23] P LIU X, B PENG, L ZHANG W et al. Novel AlN/Pt/ZnO electrode for high temperature SAW sensors. Materials, 10, 69(2017).

    [24] P LIU X, B PENG, L ZHANG W et al. Improvement of high-temperature stability of Al2O3/Pt/ZnO/Al2O3 film electrode for SAW devices by using Al2O3 barrier layer. Materials, 10, 1377(2017).

    [25] Z KHODAIR, A KAMIL A, K ABDALAAH Y. Effect of annealing on structural and optical properties of Ni(1-x)MnxO nanostructures thin films. Physica B: Condensed Matter, 503, 55-63(2016).

    Xing-Peng LIU, Bin PENG, Wan-Li ZHANG, Jun ZHU. Al2O3 Coating Layer on the High Temperature Conductive Stability of Pt/ZnO/Al2O3 Film Electrode[J]. Journal of Inorganic Materials, 2019, 34(6): 605
    Download Citation