[1] Campbell J H, Hawley-Fedder R A, Stolz C J, et al. NIF optical materials and fabrication technologies: An overview[J]. Proceedings of SPIE, 2004, 5341: 84–101.
[2] Xu Q, Wang J, Ma P, et al. Progress of advanced optical manu-facturing technology[J]. High Power Laser and Particle Beams, 2013, 25(12): 3098–3105.
[3] Spaeth M L, Manes K R, Kalantar D H, et al. Description of the NIF laser[J]. Fusion Science and Technology, 2016, 69(1): 25–145.
[4] Fuchs B A, Hed P P, Baker P C. Fine diamond turning of KDP crystals[J]. Applied Optics, 1986, 25(11): 1733–1735.
[5] Liang Y C, Chen W Q, Bai Q S, et al. Design and dynamic opti-mization of an ultraprecision diamond flycutting machine tool for large KDP crystal machining[J]. The International Journal of Advanced Manufacturing Technology, 2013, 69(1–4): 237–244.
[6] Chen M J, Li M Q, Cheng J, et al. Study on characteristic para-meters influencing laser-induced damage threshold of KH2PO4 crystal surface machined by single point diamond turning[J]. Journal of Applied Physics, 2011, 110(11): 113103.
[7] An C H, Deng CY, Miao J G, et al. Investigation on the genera-tion of the waviness errors along feed-direction on flycutting surfaces[J]. The International Journal of Advanced Manufactur-ing Technology, 2018, 96(1): 1457–1465.
[8] Yang X, An C H, Wang Z Z, et al. Research on surface topo-graphy in ultra-precision flycutting based on the dynamic per-formance of machine tool spindle[J]. The International Journal of Advanced Manufacturing Technology, 2016, 87(5–8): 1957–1965.
[9] Zhang F H, Wang S F, An C H, et al. Full-band error control and crack-free surface fabrication techniques for ultra-precision fly cutting of large-aperture KDP crystals[J]. Frontiers of Mechanical Engineering, 2017, 12(2): 193–202.
[10] Wang S F, An C H, Zhang F H, et al. An experimental and theo-retical investigation on the brittle ductile transition and cutting force anisotropy in cutting KDP crystal[J]. International Journal of Machine Tools and Manufacture, 2016, 106: 98–108.
[11] Wang S F, An C H, Zhang F H, et al. Simulation research on the anisotropic cutting mechanism of KDP crystal using a new con-stitutive model[J]. Machining Science and Technology: An In-ternational Journal, 2017, 21(2): 202–222.
[12] Guo Y B, Chen B K, Zhang Y, et al. Research on parallel grind-ing method of non-axisymmetric aspheric lens[J]. Chinese Journal of Mechanical Engineering, 2004, 17(1): 149–151.
[13] Shore P, Morantz P, Luo X C, et al. Big OptiX ultra precision grinding/measuring system[J]. Proceedings of SPIE, 2005, 5965: 241–248.
[14] Suzuki H, Murakam S. An ultraprecision grinding machine for non-axisymmetric aspheric mirrors[J]. Nanotechnology, 1995, 6(4): 152–157.
[15] Zhou L, Wei Q C, Zhao S J, et al. Computer-aided NC pro-gramming system for large scale and off-axis aspheric optics in parallel grinding[J]. Proceedings of SPIE, 2019, 10842: 108420V.
[16] Zhou L, Wei Q C, Zheng N, et al. Dressing technology of arc diamond wheel by roll abrading in aspheric parallel grinding[J]. The International Journal of Advanced Manufacturing Technol-ogy, 2019, 105(5): 2699–2706.
[17] Zhou L, Xie R Q, Chen X H, et al. Analysis and optimization on cross section profile of fused silica grinding wheel[J]. Diamond and Abrasives Engineering, 2018, 38(1): 59–64.
[18] Zhou L, Zheng N, Chen X H, et al. Crack depth uniformity control techniques for large scale fused silica optics in grinding process[J]. Proceedings of SPIE, 2019, 11068: 1106815.
[19] Zhou L, Wei Q C, Li J, et al. The effect of diamond wheel wear on surface and sub-surface quality in fused silica optics grind-ing[J]. IOP Conference Series Materials Science and Engineer-ing, 2019, 677: 022091.
[20] Walker D D, Brooks D, Freeman R, et al. The first aspheric form and texture results from a production machine embodying the precession process[J]. Proceedings of SPIE, 2001, 4451: 267–276.
[21] Pan R, Zhong B, Chen D J, et al. Modification of tool influence function of bonnet polishing based on interfacial friction coeffi-cient[J]. International Journal of Machine Tools and Manufacture, 2018, 124: 43–52.
[22] Zhong B, Wang C J, Chen X H, et al. Time-varying tool influence function model of bonnet polishing for aspheric surfaces[J]. Ap-plied Optics, 2019, 58(4): 1101–1109.
[23] Zhong B, Chen X H, Deng W H, et al. Improving material re-moval determinacy based on the compensation of tool influence function[J]. Proceedings of SPIE, 2018, 10710: 107102P.
[24] Zhong B, Huang H Z, Chen X H, et al. Modelling and simulation of Mid-spatial-frequency error generation in CCOS[J]. Journal of the European Optical Society-Rapid Publications, 2018, 14(1): 4.
[25] Zhong B, Chen X H, Pan R, et al. The effect of tool wear on the removal characteristics in high-efficiency bonnet polishing[J]. The International Journal of Advanced Manufacturing Technol-ogy, 2017, 91(9): 3653–3662.
[26] [Zhong B, Huang H Z, Chen X H, et al. Impact of pad condition-ing on the bonnet polishing process[J]. The International Journal of Advanced Manufacturing Technology, 2018, 98(1): 539–549.
[27] Chen X H, Yu H D, Zhong B, et al. Development of key tech-nologies in the fabrication of large aperture off-axis wedge fo-cusing lens[J]. Proceedings of SPIE, 2016, 10255: 102551C.
[28] Ke X L, Wang C J, Guo Y B, et al. Modeling of tool influence function for high-efficiency polishing[J]. The International Journal of Advanced Manufacturing Technology, 2016, 84(9–12): 2479–2489.
[29] Pal R K, Garg H, Karar V. Full aperture optical polishing process: overview and challenges[C]//CAD/CAM, Robotics and Factories of the Future, New Delhi, 2016: 461–470.
[30] Suratwala T I, Feit M D, Steele W A. Toward Deterministic Ma-terial removal and surface figure during fused silica pad polish-ing[J]. Journal of the American Ceramic Society, 2010, 93(5): 1326–1340.
[31] Xie R Q, Zhao S J, Liao D F, et al. Recent advances in rapid polishing process of large aperture optical flats[J]. Proceedings of SPIE, 2019, 10841: 108410V.
[32] Xie R Q, Zhao S J, Liao D F, et al. Suppressing surface low and mid-spatial frequency errors of large optics during full-aperture rapid polishing[C]//Optical Fabrication and Testing 2019, OSA Technical Digest, Washington, DC United States, 2019: OM3A.2.
[33] Xie R Q, Zhao S J, Liao D F, et al. Numerical simulation and experimental study of surface waviness during full aperture rapid planar polishing[J]. The International Journal of Advanced Man-ufacturing Technology, 2018, 97(9): 3273–3282.
[34] Xie R Q, Zhao S J, Liao D F, et al. E.ects of kinematics and groove parameters on the mid-spatial frequency error of optics induced during full aperture polishing[J]. Precision Engineering, 2019, 57: 176–188.
[35] Xie R Q, Liao D F, Chen J, et al. In-situ shape measurement technology during large aperture optical planar continuous po-lishing process[J]. Proceedings of SPIE, 2018, 10710: 1071033.
[36] Liao D F, Xie R Q, Sun R K, et al. Improvement of the surface shape error of the pitch lap to a deterministic continuous polish-ing process[J]. Journal of Manufacturing Processes, 2018, 36: 565–570.
[37] Liao D F, Xie R Q, Zhao S J, et al. Surface shape development of the pitch lap under the loading of the conditioner in continuous polishing process[J]. Journal of the American Ceramic Society, 2019, 102(6): 3129–3140.
[38] Liao D F, Zhang F H, Xie R Q, et al. Deterministic control of material removal distribution to converge surface figure in full-aperture polishing[J]. Journal of Manufacturing Processes, 2020, 53: 144–152.
[39] Liao D F, Zhang F H, Xie R Q, et al. Effect of interfacial friction force on material removal in full aperture continuous polishing process[J]. Precision Engineering, 2020, 63: 214–219.
[40] Kim D W, ParkWH, An H K, et al. Parametric smoothing model for visco-elastic polishing tools[J]. Optics Express, 2010, 18(21): 22515–22526.
[41] Kim D W, Burge J H. Rigid conformal polishing tool using non-linear visco-elastic effect[J]. Optics Express, 2010, 18(3): 2242–2257.
[42] Song C, Walker D D, Yu G Y. Misfit of rigid tools and interfero-meter subapertures on off-axis aspheric mirror segments[J]. Optical Engineering, 2011, 50(7): 073401.
[43] Peng W Q, Li S Y, Guan CL, et al. Ultra-precision optical surface fabricated by hydrodynamic effect polishing combined with magnetorheological finishing[J]. Optik, 2018, 156: 374–383.
[44] Hou J, Wang H X, Chen X H, et al. Effect of magnetorheological processing parameters on polishing spots[J]. Proceedings of SPIE, 2018, 10847: 108470P.
[45] Patel R. Mechanism of chain formation in nanofluid based MR fluids[J]. Journal of Magnetism and Magnetic Materials, 2011, 323(10): 1360–1363.
[46] Susan-Resiga D, Bica D, Vékás L. Flow behaviour of extremely bidisperse magnetizable fluids[J]. Journal of Magnetism and Magnetic Materials, 2010, 322(20): 3166–3172.
[47] Menapace J A, Ehrmann P E, Bayramian A J, et al. Imprinting high-gradient topographical structures onto optical surfaces us-ing magnetorheological finishing: manufacturing corrective opt-ical elements for high-power laser applications[J]. Applied Optics, 2016, 55(19): 5240–5248.
[48] Hou J, Cao M C, Wang H X, et al. Determination of optimized removal functions for imprinting continuous phase plates using fuzzy theory[J]. Applied Optics, 2018, 57(21): 6089–6096.
[49] Hou J, Liao D F, Wang H X. Development of multi-pitch tool path in computer-controlled optical surfacing processes[J]. Journal of the European Optical Society-Rapid Publications, 2017, 13(1): 22.