Thermal Stress of Mechanically Mounted KDP Crystals

Ruifeng Su; Zhan Huang; Mingzhi Zhu; Baoxu Wang; Wenkai Wu

doi:10.3788/AOS201737.1214001

[1] Cai Xijie, Mao Jianhua, Chen Wannian et al. Ф200 mm large aperture KDP crystal high power frequency doubling laser system[J]. Chinese J Lasers, 21, 853-859(1994).

[2] Liu Chong, Ji Lailin, Zhu Baoqiang et al. Numerical simulation analysis of high efficient SFG and color separation in far field in high power laser facility based on noncollinear phase matching by KDP crystal[J]. Acta Physica Sinica, 65, 144202(2016).

[3] Wang Duanliang, Li Tingbin, Zhang Guanghui et al. Research on nonlinear optical absorption of large-aperture KDP/DKDP crystals[J]. Journal of Synthetic Crystals, 43, 2492-2496(2014).

[4] Li Zhilai, Xu Hong, Guan Yingjun. Structural design of 1.5 m mirror subassembly for space camera[J]. Optics and Precision Engineering, 23, 1635-1641(2015).

[5] Xian Guang, Yan Changxiang, Shao Jianbing. Thermal effect on spectral-line shift of an airborne imaging spectrometer[J]. Acta Optica Sinica, 35, 0428002(2015).

[6] Zhang Jun, Xian Hao, Zhang Cheng et al. Telescope primary mirror seeing and air knife effect analysis based on theoretical calculation of temperature field[J]. Acta Optica Sinica, 33, 0811005(2013).

[7] Liu Gang, Tang Xiaojun, Zhao Hong et al. New designs and CFD numerical simulations for solid-state laser heat sink[J]. Infrared and Laser Engineering, 43, 1111-1116(2014).

[8] Liu Ju, Dong Deyi, Xin Hongwei et al. Temperature adaptation of large aperture mirror assembly[J]. Optics and Precision Engineering, 21, 3169-3175(2013).

[9] Li Haixing, Ding Yalin, Zhang Hongwen. Support system study of rectangular mirror[J]. Acta Optica Sinica, 35, 0523002(2015).

[10] Gong Dun, Tian Tieyin, Wang Hong. Thermal optical analysis of off-axis three-mirror system and its thermal control requirements[J]. Optics and Precision Engineering, 19, 1213-1220(2011).

[11] Zhou Chao. Thermal analysis of large telescope structure[J]. Acta Photonica Sinica, 43, 0422006(2014).

[12] Shangguan Aihong, Wang Chenjie, Zhang Haosu et al. Thermal-structural coupled analysis and verification of 2-D mirror gimbal for lunar-based telescope[J]. Optics and Precision Engineering, 24, 1956-1964(2016).

[13] Shi Kui, Yang Hongtao, Chen Weining et al. Thermal design for the optical-structure system of high resolution high-altitude camera[J]. Acta Photonica Sinica, 44, 0522005(2015).

[14] Xin Hongwei, Guan Yingjun, Li Jinglin et al. Design of support for large aperture rectangular mirror[J]. Optics and Precision Engineering, 19, 1560-1568(2011).

[15] Zhao Lei, Gong Yan. Design and analysis for the high-precision lens support structure of objective lens for lithography[J]. Acta Optica Sinica, 32, 0922001(2012).

[16] Yuan Jian, Sha Wei, Ren Jianyue. Structure design of a deformable mirror used on space camera[J]. Acta Photonica Sinica, 45, 0122001(2016).

[17] Yang Guanghua, Li Yanqiu. Thermal and structural deformation of projection optics and its influence on optical imaging performance for 22 nm extreme ultraviolet lithography[J]. Acta Optica Sinica, 32, 0322005(2012).

[18] Yang Liang, Li Zhaohui, Zhang Liping et al. Design of reflector subassembly for lunar-based extreme ultraviolet camera[J]. Acta Photonica Sinica, 41, 1321-1326(2012).

[19] Xu Hong, Guan Yingjun. Structural design of 1 m diameter space mirror component of space camera[J]. Optics and Precision Engineering, 21, 1488-1495(2013).

[20] Fan Zhigang, Chang Hong, Chen Shouqian. Design of bonding layer in lens athermal mount[J]. Optics and Precision Engineering, 19, 2573-2581(2011).

[21] Mei Gui, Zhai Yan, Miao Jianyu et al. Design of a high resolution and wide field space infrared optical system[J]. Acta Optica Sinica, 34, 1222004(2014).

[22] Chen Hua, Su Dongqi, Sui Yongxin et al. Active compensation of thermal aberrations in lithographic projection lens[J]. Acta Optica Sinica, 34, 0811001(2014).

[23] Zhang Xin, Qiao Yanfeng, Zhu Mingchao et al. Two-lens athermalized infrared telephoto objective[J]. Acta Optica Sinica, 34, 0822004(2014).

[24] Zhang Xinting, An Zhiyong. Design of infrared athermal system with double-layer harmonic diffractive element[J]. Acta Photonica Sinica, 42, 1524-1527(2013).

[25] Xu D G, Yao J Q, Zhang B G et al. 110 W high stability green laser using type II phase matching KTiOPO4 (KTP) crystal with boundary temperature control[J]. Optics Communications, 245, 341-347(2005). http://www.sciencedirect.com/science/article/pii/S0030401804010454

[26] Bugene F J, Hecht E. Schaurm’s outlines of theory and problems of college physics[M]. New York: McGraw-Hill Companies, 213-220(2012).

[27] Xu Zhilun[M]. Elasticity, 15-22(2006).

[28] Lubin O, Gouedard C. Modeling of the effects of KDP crystals gravity sag on third harmonic generation[C]. SPIE, 3492, 802-808(1999).