[1] Jin Wenzhong, Li Sufang, Li Tingju, et al. Study on vacuum casting technology of high temperature alloy ingot under complex electromagnetic field [J]. Rare Metal Materials and Engineering, 2015, 44(6): 1546-1549. (in Chinese)
[2] Wu Xiaofeng, Zhang Guangan, Wu Fufa. Microstructural characteristics of Mg2Si/Al composite under different superheat and electromagnetic stirring[J]. Rare Metal Materails and Engineering, 2015, 44(3): 576-580.
[3] Bachmann M, Avilov V, Gumenyuk A, et al. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts[J]. International Journal of Heat and Mass TranRer, 2013, 60(60): 309-321.
[4] Gatzen M, Tang Z, Vollertsen F. Effect of electromagnetic stirring on the element distribution in laser beam welding of aluminium with filler wire[J]. Physics Procedia, 2011, 12(1): 56-65
[5] Cai Chuanxiong, Liu Hongxi, Jiang Yehua, et al. Effects of alternating magnetic field on microstructure and wear resistance of laser cladding Fe based composite coatings [J]. Tribology Journal, 2013, 33(3): 229-235. (in Chinese)
[6] Wang Wei, Liu Qi, Yang Guang, et al. Effects of electromagnetic stirring on microstructure and hardness of laser deposited repair parts of BT20 titanium alloy [J]. Rare Metal Materials and Engineering, 2015, 44(1): 194-198. (in Chinese)
[7] Wang Wei, Liu Qi, Yang Guang, et al. Numerical simulation of electromagnetic field, temperature field and flow field in a laser molten pool under electromagnetic stirring [J]. Chinese Journal of Lasers, 2015, 42(2): 0202007. (in Chinese)
[9] Chen Xingrun, Zhang Zhifeng, Xu Jun, et al. Numerical simulation of electromagnetic field, flow field and temperature field in semi-solid slurry prepared by electromagnetic stirring [J]. The Chinese Journal of Nonferrous Metals, 2010, 20(5): 937-945. (in Chinese)
[11] Barman N, Kumar P, Dutta P. Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirring[J]. J M ater Process Techn, 2009, 209(18-19): 5912-5923.
[12] Gerald Tennyson P, Kumar P, Lakshmi H, et al. Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring[J]. Trans Nonferrous Met Soc China, 2010, 20(z3): 774-780.
[13] Wei L, Lin X, Wang M, et al. A cellular automaton model for the solidification of a pure substance[J]. Appl Phys A, 2011, 103(1): 123-133
[14] Jia Ruigao, Xue Qingzhong. Electromagnetics[M]. Beijing: Higher Education Press, 2003. (in Chinese)
[15] Grant I S, Phillips W R. Electromagnetism[M]. Beijing: People′s Education Press, 1982. (in Chinese)
[16] Mao Bin, Zhang Guifang, Li Aiwu. Theory and Technology of Electromagnetic Stirring for Continuous Casting [M]. Beijing: Metallurgical Industry Press, 2012.(in Chinese)
[17] Xue Xiong. Research on manufacturing technology of rotating magnetic field assisted laser deposition of titanium alloys[D]. Shenyang: Shenyang Aerospace University, 2016. (in Chinese)
[18] Huang Y J, Zeng X Y, Hu S F, et al. Microstructure and interface in laser induction hybrid cladding of Ni-based coating[J]. Appl Surf Sci, 2009, 255(7): 3940-3945.
[19] Zhen Zisheng, Mao Weimin, Hong Tao, et al. Effects of electromagnetic stirring parameters on the microstructure of semi-solid AZ91D Mg alloy [J]. Journal of University of Science and Technology Beijing, 2003, 25(4): 341-370. (in Chinese)
[21] Li Yanmin, Liu Zhenxia, Yang Haiou, et al. Temperature field measurement and numerical simulation in laser cladding process[J]. Acta Metallurgica Sinica, 2003, 39(5): 521-525. (in Chinese)
[22] Tan Hua. Temperature measurement and microstructure control in laser rapid forming process[D]. Xi′an: Northwestern Polytechnical University, 2003. (in Chinese)
