Laser Surface Texturing of Super-Hard Cutting Tools and Control of Texture Morphology

Su Yongsheng; Li Liang; Gao Hong; Wang Jianbin; Wang Gang

doi:10.3788/lop54.121408

[1] Dai Z D, Tong J, Ren L Q. Researches and developments of biomimetics in tribology［J］. Chinese Science Bulletin, 2006, 51(22): 2681-2689.

[2] Zhang H, Guo D J, Dai Z D. Progress on gecko-inspired micro/nano-adhesion arrays［J］. Chinese Science Bulletin, 2010, 55(18): 1843-1850.

[3] Tian Ximei. Biological coupling and bionic anti-wear properties of typical molluscan shells［D］. Changchun: Jilin University, 2013.

[4] Xing Y Q, Deng J X, Wu Z, et al. Effect of regular surface textures generated by laser on tribological behavior of Si3N4/TiC ceramic［J］. Applied Surface Science, 2013, 265: 823-832.

[5] Wu Z, Deng J X, Zhang H, et al. Tribological behavior of textured cemented carbide filled with solid lubricants in dry sliding with titanium alloys［J］. Wear, 2012, 292/293: 135-143.

[6] Wu Z, Deng J X, Xing Y Q, et al. Effect of surface texturing on friction properties of WC/Co cemented carbide［J］. Materials & Design, 2012, 41: 142-149.

[7] Mo J L, Wang Z G, Chen G X, et al. The effect of groove-textured surface on friction and wear and friction-induced vibration and noise［J］. Wear, 2013, 301(1/2): 671-681.

[8] Tomanik E. Friction and wear bench tests of different engine liner surface finishes［J］. Tribology International, 2008, 41(11): 1032-1038.

[9] Ibatan T, Uddin M S, Chowdhury M A K. Recent development on surface texturing in enhancing tribological performance of bearing sliders［J］. Surface and Coatings Technology, 2015, 272: 102-120.

[10] Jia Z X, Li J Q, Liu L J, et al. Performance enhancements of high-pressure die-casting die processed by biomimetic laser-remelting process［J］. The International Journal of Advanced Manufacturing Technology, 2012, 58(5/6/7/8): 421-429.

[11] Yang Y F, Su Y S, Li L, et al. Performance of cemented carbide tools with microgrooves in Ti-6Al-4V titanium alloy cutting［J］. The International Journal of Advanced Manufacturing Technology, 2015, 76(9/10/11/12): 1731-1738.

[12] Obikawa T, Kamio A, Takaoka H, et al. Micro-texture at the coated tool face for high performance cutting［J］. International Journal of Machine Tools and Manufacture, 2011, 51(12): 966-972.

[13] Yu H, Deng H, Huang W, et al. The effect of dimple shapes on friction of parallel surfaces［J］. Journal of Engineering Tribology, 2011, 225(8): 693-703.

[14] Wakuda M, Yamauchi Y, Kanzaki S, et al. Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact［J］. Wear, 2003, 254(3): 356-363.

[15] Deng J X, Wu Z, Lian Y S, et al. Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes［J］. International Journal of Refractory Metals and Hard Materials, 2012, 30(1): 164-172.

[16] Xing Y Q, Deng J X, Feng X T, et al. Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction［J］. Materials & Design, 2013, 52: 234-245.

[17] Wu Z, Deng J X, Xing Y Q, et al. Effect of surface texturing on friction properties of WC/Co cemented carbide［J］. Materials & Design, 2012, 41: 142-149.

[18] Vladescu S C, Olver A V, Pegg I G, et al. The effects of surface texture in reciprocating contacts-An experimental study［J］. Tribology International, 2015, 82: 28-42.

[19] Arulkirubakaran D, Senthilkumar V, Kumawat V. Effect of micro-textured tools on machining of Ti-6Al-4V alloy: An experimental and numerical approach［J］. International Journal of Refractory Metals and Hard Materials, 2016, 54: 165-177.

[20] Kawasegia N, Sugimori H, Morimoto H, et al. Development of cutting tools with microscale and nanoscale textures to improve frictional behavior［J］. Precision Engineering, 2009, 33(3): 248-254.

[21] Enomoto T, Sugihara T, Yukinaga S, et al. Highly wear-resistant cutting tools with textured surfaces in steel cutting［J］. CIRP Annals-Manufacturing Technology, 2012, 61(1): 571-574.

[22] Enomoto T, Sugihara T. Improvement of anti-adhesive properties of cutting tool by nano/micro textures and its mechanism［J］. Procedia Engineering, 2011, 19: 100-105.

[23] Chang W L, Sun J, Luo X C, et al. Investigation of microstructured milling tool for deferring tool wear［J］. Wear, 2011, 271(9/10): 2433-2437.

[24] Sugihara T, Enomoto T. Improving anti-adhesion in aluminum alloy cutting by micro stripe texture［J］. Precision Engineering, 2012, 36(2): 229-237.

[25] Li Pingxue, Zhang Yue. Review of 980 nm Yb-doped fiber laser［J］. Laser & Optoelectronics Progress, 2017, 54(7): 070004.

[26] Hu Zhitao, He Bing, Zhou Jun, et al. Research progress in thermal effect of high power fiber lasers［J］. Laser & Optoelectronics Progress, 2016, 53(8): 080002.

[27] Liu Jiang, Tan Fangzhou, Liu Chen, et al. Progress on high-power ultrashort-pulsed thulium-doped fiber lasers［J］. Chinese J Lasers, 2017, 44(2): 0201003.

[28] Su Y S, Li L, He N, et al. Experimental study of fiber laser surface texturing of polycrystalline diamond tools［J］. International Journal of Refractory Metals and Hard Materials, 2014, 45: 117-124.

[29] Zhou Bingkun. Laser principle ［M］. Beijing: National Defence Industry Press, 1980.