[1] Knapp V and Pevec D 2018 Promises and limitations of nuclear fission energy in combating climate change Energy Policy 120 94–9

[2] Entler S, Horacek J, Dlouhy T and Dostal V 2018 Approximation of the economy of fusion energy Energy 152 489–97

[3] Rowcliffe A F, Garrison L M, Yamamoto Y, Tan L and Katoh Y 2018 Materials challenges for the fusion nuclear science facility Fusion Eng. Des. 135 290–301

[4] Schmid K, Rieger V and Manhard A 2012 Comparison of hydrogen retention in W and W/Ta alloys J. Nucl. Mater. 426 247–53

[5] Rieth M et al 2013 Recent progress in research on tungsten materials for nuclear fusion applications in Europe J. Nucl. Mater. 432 482–500

[6] Neu R et al 2016 Advanced tungsten materials for plasmafacing components of DEMO and fusion power plants Fusion Eng. Des. 109–111 1046–52

[7] Prakash C, Lee H, Alucozai M and Tomar V 2016 An analysis of the influence of grain boundary strength on microstructure dependent fracture in polycrystalline tungsten Int. J. Fract. 199

[8] Ren C, Fang Z Z, Koopman M, Butler B, Paramore J and Middlemas S 2018 Methods for improving ductility of tungsten—a review Int. J. Refract. Met. Hard Mater. 75 170–83

[9] Wang J, Zhao G, Chen L and Li J 2016 A comparative study of several constitutive models for powder metallurgy tungsten at elevated temperature Mater. Des. 90 91–100

[10] Antusch S, Hoffmann J, Klein A, Gunn J P, Rieth M and Weingaertner T 2018 Processing of complex near-netshaped tungsten parts by PIM Nucl. Mater. Energy 16 71–5

[11] Senthilnathan N, Annamalai A R and Venkatachalam G 2018 Synthesis of tungsten through spark plasma and conventional sintering processes Mater. Today Proc. 5 7954–9

[12] Zolfaghari A, Chen T and Yi A Y 2019 Additive manufacturing of precision optics at micro and nanoscale Int. J. Extrem. Manuf. 1 012005

[13] Gu D D, Meiners W, Wissenbach K and Poprawe R 2012 Laser additive manufacturing of metallic components: materials, processes and mechanisms Int. Mater. Rev. 57 133–64

[14] Yap C Y, Chua C K, Dong Z L, Liu Z H, Zhang D Q, Loh L E and Sing S L 2015 Review of selective laser melting: materials and applications Appl. Phys. Rev. 2 041101

[15] Olakanmi E O, Cochrane R F and Dalgarno K W 2015 A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties Prog. Mater Sci. 74 401–77

[16] Herzog D, Seyda V, Wycisk E and Emmelmann C 2016 Additive manufacturing of metals Acta Mater. 117 371–92

[17] Zhang S, Cheng X, Yao Y, Wei Y, Han C, Shi Y, Wei Q and Zhang Z 2015 Porous niobium coatings fabricated with selective laser melting on titanium substrates: Preparation, characterization, and cell behavior Mater. Sci. Eng. C 53 50–9

[18] Gu D, Shi Q, Lin K and Xi L 2018 Microstructure and performance evolution and underlying thermal mechanisms of Ni-based parts fabricated by selective laser melting Addit. Manuf. 22 265–78

[19] Gu D, Zhang H, Dai D, Xia M, Hong C and Poprawe R 2019 Laser additive manufacturing of nano-TiC reinforced Nibased nanocomposites with tailored microstructure and performance Composites B 163 585–97

[20] Ma C, Gu D, Dai D, Zhang H, Zhang H, Yang J, Guo M, Du Y and Gao J 2019 Microstructure evolution and hightemperature oxidation behaviour of selective laser melted TiC/TiAl composites Surf. Coat. Technol. 375 534–43

[21] Gu D, Rao X, Dai D, Ma C, Xi L and Lin K 2019 Laser additive manufacturing of carbon nanotubes (CNTs) reinforced aluminum matrix nanocomposites: processing optimization, microstructure evolution and mechanical properties Addit. Manuf. 29 100801

[22] Wang D Z, Li K L, Yu C F, Ma J, Liu W and Shen Z J 2019 Cracking behavior in additively manufactured pure tungsten Acta Metall. Sin. 32 127–35

[23] Faidel D, Jonas D, Natour G and Behr W 2015 Investigation of the selective laser melting process with molybdenum powder Addit. Manuf. 8 88–94

[24] Zhou L, Yuan T, Li R, Tang J, Wang G and Guo K 2017 Selective laser melting of pure tantalum: densification, microstructure and mechanical behaviors Mater. Sci. Eng. A 707 443–51

[25] Wang D, Yu C, Ma J, Liu W and Shen Z 2017 Densification and crack suppression in selective laser melting of pure molybdenum Mater. Des. 129 44–52

[26] Wen S, Wang C, Zhou Y, Duan L, Wei Q, Yang S and Shi Y 2019 High-density tungsten fabricated by selective laser melting: densification, microstructure, mechanical and thermal performance Opt. Laser Technol. 116 128–38

[27] Ivekovi? A, Omidvari N, Vrancken B, Lietaert K, Thijs L, Vanmeensel K, Vleugels J and Kruth J P 2018 Selective laser melting of tungsten and tungsten alloys Int. J. Refract. Met. Hard Mater. 72 27–32

[28] Wang D, Yu C, Zhou X, Ma J, Liu W and Shen Z 2017 Dense pure tungsten fabricated by selective laser melting Appl. Sci. 7 430

[29] Enneti R K, Morgan R and Atre S V 2018 Effect of process parameters on the Selective Laser Melting (SLM) of tungsten Int. J. Refract. Met. Hard Mater. 71 315–9

[30] Yu W, Sing S L, Chua C K and Tian X 2019 Influence of remelting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting J. Alloys Compd. 574–81

[31] Wan H Y, Zhou Z J, Li C P, Chen G F and Zhang G P 2018 Effect of scanning strategy on grain structure and crystallographic texture of Inconel 718 processed by selective laser melting J. Mater. Sci. Technol. 34 1799–804

[32] Yasa E and Kruth J P 2011 Microstructural investigation of selective laser melting 316 l stainless steel parts exposed to laser re-melting Proc. Eng. 19 389–95

[33] Sun S H, Hagihara K and Nakano T 2018 Effect of scanning strategy on texture formation in Ni-25 at%Mo alloys fabricated by selective laser melting Mater. Des. 140 307–16

[34] Geiger F, Kunze K and Etter T 2016 Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies Mater. Sci. Eng. A 661 240–6

[35] Yasa E, Kruth J P and Deckers J 2011 Manufacturing by combining selective laser melting and selective laser erosion/laser re-melting CIRP Ann.—Manuf. Technol. 60 263–6

[36] Dai D, Gu D, Zhang H, Xiong J, Ma C, Hong C and Poprawe R 2018 Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts Opt. Laser Technol. 99 91–100

[37] Zhou X, Liu X, Zhang D, Shen Z and Liu W 2015 Balling phenomena in selective laser melted tungsten J. Mater. Process. Technol. 222 33–42

[38] Wang D, Wang Z, Li K, Ma J, Liu W and Shen Z 2019 Cracking in laser additively manufactured W: initiation mechanism and a suppression approach by alloying Mater. Des. 162 384–93

[39] Braun J, Kaserer L, Stajkovic J, Leitz K H, Tabernig B, Singer P, Leibenguth P, Gspan C, Kestler H and Leichtfried G 2019 Molybdenum and tungsten manufactured by selective laser melting: analysis of defect structure and solidification mechanisms Int. J. Refract. Met. Hard Mater. 84 104999

[40] Guo M, Gu D, Xi L, Zhang H, Zhang J, Yang J and Wang R 2019 Selective laser melting additive manufacturing of pure tungsten: role of volumetric energy density on densification, microstructure and mechanical properties Int. J. Refract. Met. Hard Mater. 84 105025

[41] Zhang B, Li Y and Bai Q 2017 Defect formation mechanisms in selective laser melting: a review Chin. J. Mech. Eng. 30 515–27

[42] Mills K C, Su Y, Li Z and Brooks R F 2004 Equations for the calculation of the thermo-physical properties of stainless steel ISIJ Int. 44 1661–8

[43] Keene B J 2014 Review of data for the surface tension of pure metals Int. Mater. Rev. 38 157–92

[44] Paradis P F, Ishikawa T and Yoda S 2005 Viscosity of liquid undercooled tungsten J. Appl. Phys. 97 106101

[45] Huang H, Wu Y Q, Wang S L, He Y H, Zou J, Huang B Y and Liu C T 2009 Mechanical properties of single crystal tungsten microwhiskers characterized by nanoindentation Mater. Sci. Eng. A 523 193–8

[46] Lee J, Kim S, Ott R T, Kim J, Eckert J and Lee M 2015 Effect of reinforcement phase on the mechanical property of tungsten nanocomposite synthesized by spark plasma sintering Int. J. Refract. Met. Hard Mater. 54 14–8

[47] Ma J, Zhang J, Liu W and Shen Z 2013 Suppressing poreboundary separation during spark plasma sintering of tungsten J. Nucl. Mater. 438 199–203

[48] Yanwei L, Xiaodong Y, Chengwen T, Tiefeng S, Kunsong M and Hongnian C 2011 Effect of the β phase on compressive mechanical property of CVD tungsten Rare Met. Mater. Eng. 40 1138–40

[49] Ren C, Fang Z Z, Xu L, Ligda J P, Paramore J D and Butler B G 2019 An investigation of the microstructure and ductility of annealed cold-rolled tungsten Acta Mater. 162 202–13

[50] Hansen N 2004 Hall–Petch relation and boundary strengthening Scr. Mater. 51 801–6

[51] Livescu V, Knapp C M, Gray G T, Martinez R M, Morrow B M and Ndefru B G 2018 Additively manufactured tantalum microstructures Materialia 1 15–24

[52] Arunkumar S, Rangarajan P, Devakumaran K and Sathiya P 2015 Comparative study on transverse shrinkage, mechanical and metallurgical properties of AA2219 aluminium weld joints prepared by gas tungsten arc and gas metal arc welding processes Def. Technol. 11 262–8

[53] Tsuchiya S, Ohno M, Matsuura K and Isobe K 2011 Formation mechanism of coarse columnar γ grains in as-cast hyperperitectic carbon steels Acta Mater. 59 3334–42

[54] Sidambe A T, Tian Y, Prangnell P B and Fox P 2019 Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten Int. J. Refract. Met. Hard Mater. 78 254–63