Effect of different nitrogen ion implantation parameters on surface charge accumulation and dissipation characteristics of polytetrafluoroethene

Youhui He; Hongbin Chen; Fei Li; Falun Song

doi:10.11884/HPLPB202234.220213

[1] Xie Sujiang. Modifying of poly (tetrafluoroethylene) and its application[J]. New Chemical Materials, 30, 26-30(2002).

[2] Wang Feng, Qiu Yuchang, Zhang Qiaogen, . Study on influence of surface charge accumulation on flashover of insulator[J]. Electric Power, 35, 52-55(2002).

[3] Kumara S, Serdyuk Y V, Gubanski S M. Simulation of surface charge effect on impulse flashover characteristics of outdoor polymeric insulators[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 17, 1754-1763(2010).

[4] Kato K, Kato H, Ishida T, et al. Influence of surface charges on impulse flashover characteristics of alumina dielectrics in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 16, 1710-1716(2009).

[5] Du B X, Xiao Meng. Influence of surface charge on DC flashover characteristics of epoxy/BN nanocomposites[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 21, 529-536(2014).

[6] Yan Ping, Shao Tao, Wang Jue, et al. Experimental investigation of surface flashover in vacuum using nanosecond pulses[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 14, 634-642(2007).

[7] Ma Guoming, Zhou Hongyang, Li Chengrong, et al. Designing epoxy insulators in SF₆-filled DC-GIL with simulations of ionic conduction and surface charging[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 22, 3312-3320(2015).

[8] Kindersberger J, Lederle C. Surface charge decay on insulators in air and sulfurhexafluorid—part I: simulation[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 15, 941-948(2008).

[9] Yamamoto O, Takuma T, Fukuda M, et al. Improving withstand voltage by roughening the surface of an insulating spacer used in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 10, 550-556(2003).

[10] Lang Yan, Wang Yibo, Su Guoqiang, . Influence of surface roughness on vacuum flashover characteristics of PMMA[J]. High Voltage Engineering, 41, 474-478(2015).

[11] Guo Baohong, Sun Guangyu, Zhang Shu, et al. Mechanism of vacuum flashover on surface roughness[J]. Journal of Physics D: Applied Physics, 52, 215301(2019).

[12] Lv Jinzhuang. The influence of trap distribution of alumina ceramics on the surface flashover perfmance in vacuum[D]. Beijing: Nth China Electric Power University (Beijing), 2003: 6674

[13] Li Chengrong, Ding Lijian, Lv Jinzhuang, et al. The relation of trap distribution of alumina with surface flashover performance in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 13, 79-84(2006).

[14] Li Shengtao, Huang Qifeng, Sun Jian, et al. Effect of traps on surface flashover of XLPE in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 17, 964-970(2010).

[15] Fukuda H, Yamano Y, Kobayashi S, et al. Relationship between vacuum surface flashover ging acteristics f alumina ceramics of lowered resistivity[C]Proceedings of the 2013 2nd International Conference on Electric Power EquipmentSwitching Technology. 2013: 14.

[16] Wang Dibo, Tang Ju, Tao Jiagui, . Surface charge accumulation characteristics on polymer after flashover and corona charging under DC voltage[J]. High Voltage Engineering, 41, 3618-3627(2015).

[17] Chen Shixiu, Xie Guangrun. The effect of temperature on the corona performances[J]. High Voltage Engineering, 20, 3-8(1994).

[18] Lutz B, Kindersberger J. Influence of the relative huity on the DC potential distribution of polymeric cylindrical model insulats[C]Proceedings of the 2010 International Conference on Condition Moniting Diagnosis. 2010: 541544.

[19] Zhang Guanjun, Su Guoqiang, Song Baipeng, et al. Pulsed flashover across a solid dielectric in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 25, 2321-2339(2018).

[20] Guo Baohong, Wang Yibo, Su Guoqiang, et al. Influence of surface modification by direct fluination on dielectric flashover acteristics in vacuum[C]Proceedings of the 2017 1st International Conference on Electrical Materials Power Equipment. 2017: 552555.

[21] Duan Li, Liu Wenyuan, Ke Changfeng, et al. Significantly improved surface flashover characteristics of insulators in vacuum by direct fluorination[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 456, 1-9(2014).

[22] Ke Changfeng, Liu Wenyuan, Duan Li, . Influence of surface modification on vacuum flashover performance of insulators[J]. High Power Laser and Particle Beams, 26, 065010(2014).

[23] Cross J D, Sudarshan T S. The effect of cuprous oxide coatings on surface flashover of dielectric spacers in vacuum[J]. IEEE Transactions on Electrical Insulation, EI-9, 146-150(1974).

[24] Chen Sile, Wang Shuai, Wang Yibo, et al. Surface modification of epoxy resin using He/CF₄ atmospheric pressure plasma jet for flashover withstanding characteristics improvement in vacuum[J]. Applied Surface Science, 414, 107-113(2017).

[25] Zhang Cheng, Lin Haofan, Zhang Shuai, et al. Plasma surface treatment to improve surface charge accumulation and dissipation of epoxy resin exposed to DC and nanosecond-pulse voltages[J]. Journal of Physics D: Applied Physics, 50, 405203(2017).

[26] He Jialong, Yang Zhen, Li Jie, et al. Preliminary investigation on the influence of ion beam irradiation on vacuum surface flashover acteristics of alumina ceramic[C]Progress Rept on China Nuclear Science & Technology (Vol. 5). 2017: 2227

[27] Tang Baoyin, Wang Langping. Plasma immersion ion implantation deposition technique[M]. Beijing: National Defense Industry Press, 2012: 117

[28] Zhu Mingdong, Song Falun, Li Fei, et al. Surface insulating properties of titanium implanted alumina ceramics by plasma immersion ion implantation[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 407, 155-159(2017).