[1] H LIANG, W LIN, Q WANG et al. Ultrahard and stable nanostructured cubic boron nitride from hexagonal boron nitride. Ceramics International, 12788-12794(2020).
[2] Y ICHIDA, H OHFUJI, T IRIFUNE et al. Synthesis of ultrafine nano-polycrystalline cubic boron nitride by direct transformation under ultrahigh pressure. Journal of the European Ceramic Society, 2815-2822(2018).
[3] Y ICHIDA, H OHFUJI, T IRIFUNE et al. Synthesis of coarse-grain-dispersed nano-polycrystalline cubic boron nitride by direct transformation under ultrahigh pressure. Diamond & Related Materials, 25-34(2017).
[4] T LIU, Z KOU, J LU et al. Preparation of superhard cubic boron nitride sintered from commercially available submicron powders. Journal of Applied Physics, 125902(2017).
[5] V BUSHLYA, I PETRUSHA, O GUTNICHENKO et al. Sintering of binderless cubic boron nitride and its modification by β-Si3N4 additive for hard machining applications. International Journal of Refractory Metals & Hard Materials, 105100(2020).
[6] H SUMIYA, S UESAKA, S SATOH. Mechanical properties of high purity polycrystalline cBN synthesized by direct conversion sintering method. Journal of Materials Science, 1181-1186(2000).
[7] H SUMIYA, K HARANO, Y ISHIDA. Mechanical properties of nano-polycrystalline cBN synthesized by direct conversion sintering under HPHT. Diamond & Related Materials, 14-19(2014).
[8] M YANG, Z KOU, T LIU et al. Polycrystalline cubic boron nitride prepared with cubic-hexagonal boron nitride under high pressure and high temperature. Chinese Physics B, 056105(2018).
[9] T TANIGUCHI, M AKAISHI, S YAMAOKA. Sintering of cubic boron nitride without additives at 7.7 GPa and above 2000 ℃. Journal of Materials Research, 162-169(1999).
[10] K FUJISAKI, H YOKOTA, N FURUSHIRO et al. Development of ultra-fine-grain binderless cBN tool for precision cutting of ferrous materials. Journal of Materials Processing Technology, 5646-5652(2009).
[11] Z G WANG, Y S WONG, M RAHMAN. High-speed milling of titanium alloys using binderless CBN tools. International Journal of Machine Tools & Manufacture, 105-114(2005).
[12] Z G WANG, M RAHMAN, Y S WONG. Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys. Wear, 752-758(2005).
[13] V BUSHLYA, F LENRICK, O GUTNICHENKO et al. Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite. Wear, 152-164(2017).
[15] J ZHANG, N SUZUKI, Y WANG et al. Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond. Journal of Materials Processing Technology, 2644-2659(2014).
[16] X ZHANG, R HUANG, K LIU et al. Suppression of diamond tool wear in machining of tungsten carbide by combining ultrasonic vibration and electrochemical processing. Ceramics International, 4142-4153(2018).
[17] K LIU, X P LI. Ductile cutting of tungsten carbide. Journal of Materials Processing Technology, 348-354(2001).
[18] K NAKAMOTO, K KATAHIRA, H OHMORI et al. A study on the quality of micro-machined surfaces on tungsten carbide generated by PCD micro end-milling. CIRP Annals - Manufacturing Technology, 567-570(2012).
[19] Z ZHAN, N HE, L LI et al. Precision milling of tungsten carbide with micro PCD milling tool. International Journal of Advanced Manufacturing Technology, 2095-2103(2015).
[20] K LIU, X P LI, M RAHMAN et al. CBN tool wear in ductile cutting of tungsten carbide. Wear, 1344-1351(2003).
