[1] Bartnik A, Fiedorowicz H, Jarocki R, et al. Ablation and surface modifications of PMMA using a laser-plasma EUV source[J]. Appl Phys B, 2009, 96(9): 727-730.
[2] Serafetinides M A, Makropoulou E F. Ultrashort laser ablation of PMMA and intraocular lenses[J]. Appl Phys A, 2008, 93(11): 111-116.
[3] Lei Jianbo, Wang Zhen, Wang Yunshan, et al. Experiment Study of Laser Transmission Welding of Polymethacrylate[J]. Chinese J Lasers, 2013, 40(1): 0103006. (in Chinese)
[4] Mohammed M I, Abraham E, Desmulliez M P Y, et al. Rapid laser prototyping of valves for microfluidic autonomous systems[J]. J Micromech Microeng, 2013, 23(6): 035034.
[5] Yuan Dajun, Da Suman. Experimental and theoretical analysis of direct-write laser micromachining of polymethyl methacrylate by CO2 laser ablation[J]. Journal of Applied Physics, 2007, 101(9): 024901.
[6] Xiang Hengfu, Fu Jianzhong, Chen Zichen. Dynamic interface for three-dimensional transient laser ablation polymer microchannels[J]. Journal of Zhejiang University(Engineering Science), 2007, 41(11): 1908-1912. (in Chinese)
[7] Shen Xuefei, Chen Tao. Improvement of processing technique of CO2 laser direct writing on PMMA microchannels[J]. Chinese J Lasers, 2011, 38(6): 0603030. (in Chinese)
[9] Tan Wensheng, Zhou Jianzhong, Huang Shu, et al. Experiment of laser melting-forming for PMMA microstructure parts[J]. Chinese J Lasers, 2014, 41(7): 0703009. (in Chinese)
[10] Tan Wensheng, Zhou Jianzhong, Zhu Weili, et al. Simulation and experiment of laser melting-forming for polymer micro component(PMC)[J]. Chinese J Lasers, 2015, 42(1): 0103004. (in Chinese)
[11] Li Junchang. The Calculation of Laser Diffraction and Thermal Acting[M]. Beijing: Science Press, 2008: 344-345. (in Chinese)
