[1] ENISO/IEC 17025: 2005. General Requirements for the Competence of Testing and Calibration Laboratories[S]. International Organization for Standardization, 2005.
[2] ISO/TC 14253-1: 1998. Geometrical Product Specification (GPS)-Inspection Bymeasurement of Workpieces and Measuring Equipment-Part 1: Decision Rules for Proving Conformance or Non-Conformance with Specifications[S]. International Organization for Standardization, 1998.
[3] BIPM, IEC, IFCC, et al.. Guide to the Expressionof Uncertainty in Measurement (GUM)[S]. International Organization for Standardization, 1st edition, 1993.
[4] J H Bruning. Optical lithography: 40 years and holding[C]. SPIE, 2007: 6520: 652004.
[5] M Weiser. Ion beam figuring for lithography optics[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions wih Matericals and Atoms, 2009, 267(8-9): 1390-1393.
[6] BIPM, IEC, IFCC, et al.. International Vocabulary of Basic and General Terms in Metrology (VIM) [S]. International Organization for Standar Dization, 2nd edition, 1993.
[7] JCGM 200:2012. International Vocabulary of Metrology-Basic and General Concepts and Associated Terms (VIM), 3rd Edition[S]. Joint Committee for Guides in Metrology, 2012.
[8] Taylor B N, Kuyatt C E. NIST Technical Note 1297: Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results[S]. National Institute of Standards and Technology, 1994.
[9] BIPM, IEC, IFCC, et al.. Guide to the Expression of Uncertainty in Measurement (GUM)[S]. International Organization for Standardization, 2nd edition, 1995.
[10] JCGM 100:2008. Evaluation of Measurement Data-Guide to the Expression of Uncertainty in Measurement[S]. Joint Committee for Guides in Metrology, 2008.
[11] JCGM 101:2008. Evaluation of Measurement Data-Supplement 1 to the "Guide to the Expression of Uncertainty in Measurement" -Propagation of Distributions Using a Monte Carlo Method[S]. Joint Committee for Guides in Metrology, 2008.
[12] JJF 1059-1999. Guide to the Expression of Uncertainty in Measurement[S]. Administration for Quality Supervision and Inspection and Quarantine, 1999.
[13] JJF1059.1-2012. Guide to the Expression of Uncertainty in Measurement[S]. Administration for Quality Supervision and Inspection and Quarantine, 2012.
[14] JJF1059.2-2012. Monte Carlo Method for Evaluation of Measurement Uncertainty[S]. Administration for Quality Supervision and Inspection and Quarantine, 2012.
[15] Eurolab Technical Report 1/2006. Guide to the Evaluation of Measurement Uncertainty for Quantitative Test Results[S]. Eurolab, 2006.
[16] Eurolab Technical Report 1/2007. Measurement Uncertainty Revisited: Alternative Approaches to Uncertainty Evaluation [S]. Eurolab, 2007.
[17] S L R Ellison, A Williams. Eurachem/CITAC Guide: Quantifying Uncertainty in Analytical Measurement[S]. Eutachem, 3rd edition, 2012.
[18] Nordic Innovation Center. Handbook for Calculation of Measurement Uncertainty in Environmental Laboratories[S]. Nordtest, 2012.
[19] ISO 5725-1-6:1994. Accuracy (Trueness and Precision) of Measurement Methods and Results[S]. International Organization for Standardization, 1994.
[20] ISO 21748:2010. Guide to the Use of Repeatability, Reproducibility and Trueness Estimates in Measurement Uncertainty Estimation[S]. International Organization for Standardization, 2010.
[21] Clinical and Laboratory Standards Institute. Expression of Measurement Uncertainty in Laboratory Medicine[S]. CLSI Document EP29-A. Wayne, PA: Clinical and Laboratory Standards Institute, 2012.
[22] CNAS. Expression of Measurement Uncertainty in Laboratory Medicine[S]. CNAS, 2012.
[23] ISO/TS 14253-2. Geometrical Product Specification (GPS)-Inspection by Measurement of Workpieces and Measuring Equipment-Part 2: Guide to the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification[S]. International Organization for Standardization, 1999.
[24] ISO/TS 14253-3. Geometrical Product Specification (GPS)-Inspection by Measurement of Workpieces and Measuring Equipment-Part 3: Guidelines for Achieving Agreements on Measurement Uncertainty Statements[S]. International Organization for Standardization, 2002.
[25] Jiang Xiangqian. Theory and Applications of New-Generation Geometrical Product Specifications[M]. Beijing: Higher Education Press, 2007.
[26] GB/T 18779.2-2004. Geometrical Product Specification (GPS)-Inspection by Measurement of Workpieces and Measuring Equipment-Part 2: Guide to the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification[S]. China National Standardization Management Committee, 2004.
[27] NBSIR 75-975. The Calibration of an Optical Flat by Interferometric Comparison to a Master Optical Flat[S]. NBS, 1975.
[28] GJB/J 6221-2008. Calibration Specification for Digital Laser Plane Interferometer[S]. State Commission of Science and Technology for National Defense Industry, 2008.
[29] Wang Shengyun, Yang Hong, Zhang Mei, et al.. Figure measurement results uncertainty analysis for spherical optics[C]. 2008 30 ISO/TR 14999-1:2005. Optics and Photonics-Interferometric Measurement of Optical Elements and Optical Systems-Part 1: Terms, Definitions and Fundamental Relationships[S]. International Organization for Standardization, 2005.
[30] ISO/TR 14999-2: 2005. Optics and Photonics-Interferometric Measurement of Optical Elements and Optical Systems-Part 2:Measurement and Evaluation Techniques[S]. International Organization for Standardization, 2005.
[31] ISO/TR 14999-3: 2005. Optics and Photonics-Interferometric Measuremerit of Optical Elements and Optical Systems-Part 3: Calibration and Validation of Interferometric Test Equipment and Measurements[S]. International Organization for Standardization, 2005.
[32] Memorandum to US Industrial Metrologists. Three Flat Method for Calibration of Optical Flats and ISO 17025[S]. NIST, 2007.
[33] Johannes A Soons, Ulf Griesmann. Absolute interferometric tests of spherical surfaces based on rotational and translational shears[C]. SPIE, 2012, 8493: 84930G.
[34] Youichi Bitou, Toshiyuki Takatsuji. Kensei Ehara. Simple uncertainty evaluation method for an interferometric flatness measurement machine using a calibrated test flat[J]. Metrologia, 2008, 45(1): 21-26.
[35] Ikumatsu Fujimoto, Toshiyuki Takatsuji, Kunitoshi Nishimura, et al.. Autonomous calibration method of the reference flat surface of an interferometer without using a standard flat surface [J]. Appl Opt, 2012, 51(20): 4754-4767.
[36] B Dorband. High–precision testing of optical components[C]. SPIE, 1998, 3482: 484-489.
[37] Dorband B, G Seitz. Interferometric testing of optical surfaces at its current limit[J]. Optik, 2001, 112(9): 392-398.
[38] Günther Seitz1, Stefan Schulte, Udo Dinger, et al.. EUV microlithography-a challenge for optical metrology[C]. SPIE, 2004, 5533: 20-26.
[39] K Otaki, K Ota, I Nishiyama, et al.. Development of the point diffraction interferometer for extreme ultraviolet lithographydesign, fabrication, and evaluation[J]. J Vac Sci Technol B, 2002, 20(6): 2449-2458.
[40] K Otaki, T Yamamoto, Y Fukuda, et al.. Accuracy evaluation of the point diffraction interferometer for extreme ultraviolet lithography aspheric mirror[J]. J Vac Sci Technol B, 2002, 20(1): 295-300.
[41] K Otaki, Zhu Y, M Ishij, et al.. Rigorous wavefront analysis of the visible-light point diffraction interferometer for EUVL [C]. SPIE, 2004, 5193: 182-190.
[42] T Gemma, S Nakayama, Y Takigawa, et al.. Null testing at 1nm accuracy for sub-mm asphericity[C]. Optical Fabrication and Testing, 2002: OWD4.
[43] Yuichi Takigawa, Shigeru Nakayamaa, Takahiro Yamamoto, et al.. Absolute accuracy evaluation of aspherical null testing for EUVL mirrors[C]. SPIE, 2005, 5869: 58690Q.
[44] Peter Blake, Ronald G. Mink, David Content, et al.. Techniques and uncertainty analysis for interferometric surface figure error measurement of spherical mirrors at 20 K[C]. SPIE, 2003, 5180: 188-198.
[45] Peter Blake, Ronald G Mink, John Chambers, et al.. Surface figure measurement at 80 K: alignment and uncertainty analysis[C] SPIE, 2004, 5180: 188-198.
[46] Peter Blake, Ronald G Mink, John Chambers, et al.. High-accuracy surface figure measurement of silicon mirrors at 80 K[C]. SPIE, 2004, 5494: 122-131.
[47] P Blake, J Chambers, R G Mink, et al.. Cryogenic system for interferometry of high-precision optics at 20 K: design and performance[C]. SPIE, 2005, 5904: 59040S.
[48] NASA Technical Reports Server. Surface Figure Measurement of Silicon Carbide Mirrors at Cryogenic Temperatures [R]. 2013.
[49] C J Evans, Uncertainty evaluation for measurements of peak to valley surface form errors[C]. CIRP Annals, 2008, 57: 509-512.
[50] C J Evans, C Smith, J Soobitsky, et al.. Full area calibration of large optical flats[C]. ASPE, 2009.
[51] C J Evans. Certification, self–calibration and uncertainty in testing optical flats[C]. SPIE, 2010, 7656: 76560S.
[52] Evans C J, Davies A D. Certification, self-calibration and uncertainty in optical surface testing[J]. Int J Precision Technology, 2013, 3(4): 388-402.
[53] Peng Shijun, Miao Erlong, Shi Zhenguang, et al.. Research on high-precision measurement of radius of curvature[J]. Laser & Optoelectronics Progress, 2014, 51(1): 011201.
[54] Peng Shijun, Miao Erlong. Sub-micron precision messurement of radius of curvature and uncertainties analysis[J]. Acta Optica Sinica, 2014, 34(5): 0512001.
[55] Dongqi Su, Erlong Miao, Yongxin Sui, et al.. Absolute surface figure testing by shift-rotation method using Zernike polynomials[J]. Opt Lett, 2012, 37(15): 3198-3200.
[57] R J Hocken, W T Estler, C J Evans. Self-calibration-reversal, redundancy, error separation, and‘absolute testing [J]. Cirp Annals-manufacturign Technology, 1996, 45(2): 617-634.
[58] Schulz G, J Schwider. Interferometric testing of smooth surfaces[J]. Amsterdam: Progress in Optics, 1976, 13(8): 93-167.
[59] Flemming Tinker, Michael Bray, Douglas Smith, et al.. Full surface mapping and calibration of large interferometer flats [C]. SPIE, 2007, 6671: 712.
[60] Jensen A. Absolute calibration method for laser Twyman-Green wave-front testing interferometers[J]. J Opt Soc Am, 1973, 63: 1313A.
[61] Bruce E Truax. Absolute interferometric testing of spherical surface[C]. SPIE, 1990, 1440: 61-68.
[62] R Schreiner, J Schwider, N Lindlein, et al.. Absolute testing of the reference surface of a Fizeau interferometer through even/odd decompositions[J]. Appl Opt, 2008, 47(32): 6134-6141.
[63] J Burke. Rapid and reliable reference sphere calibration for Fizeau interferometry[J]. Opt Lett, 2008, 33(21): 2536-2538.
[64] Jan Burke, David S Wu. Calibration of spherical reference surfaces for Fizeau interferometry: a comparative study of methods[J]. Appl Opt, 2010, 49(31): 6014-6023.
[65] Klaus R Freisehlad. Absolute interferometric testing based on reconstruction of rotational shear[J]. Appl Opt, 2001, 40(10): 1637-1648.
[66] E E Bloemhof.Absolute surface metrology by differencing spatially shifted maps from a phase–shifting interferometer [J]. Opt Lett, 2010, 35(14): 2346-2348.
[67] Song Weihong. Absolute Testing of Spherical Surface with Shift-Rotation Method[D]. Beijing: University of Chinese Academy of Sciences, 2014.
[68] Parks R E, Evans C J, L Shao. Calibration of interferometer transmission spheres[J]. Optical Fabrication and Testing Workshop OSA Technical Digest Series, 1998, 12: 80-83.
[69] Griesmann U, Wang Q, Soons J, et al.. A simple ball averager for reference sphere calibrations[C]. SPIE, 2005, 5869: 58690S.
[70] Zhou P, J H Burge. Limits for interferometer calibration using the random ball test[C]. SPIE, 2009, 7426: 74260U.
[71] Yue Zhou, Young-Sik Ghim, Angela Davies. Self calibration for slope-dependent errors in optical profilometry by using the random ball test[C]. SPIE, 2012, 8493: 84930H.
[72] Chris J Evans, Angela Davies, Tony Schmitz, et al.. Interferometric figure metrology: enabling in-house traceability [C]. SPIE, 2001, 4450: 81-93.
[73] Bergner B C, A Davies. Self–calibration for transmitted wavefront measurements[J]. Appl Opt, 2007, 46(1): 18-24.
