Research Progress on Preparation and Capture Performance of CaO-Based CO2 Capture Materials from Solid Wastes

ZHAO Keping; LI Xiaoyu; LI Ruihong; LI Haoran; YANG Tianzuo; YOU Jiajin; PENG Kang

[1] YAN Y L, BORHANI T N, SUBRAVETI S G, et al. Harnessing the power of machine learning for carbon capture, utilisation, and storage (CCUS): a state-of-the-art review［J］. Energy & Environmental Science, 2021, 14(12): 6122-6157.

[6] HU Y C, QU M Y, LI H L, et al. Porous extruded-spheronized Li4SiO4 pellets for cyclic CO2 capture［J］. Fuel, 2019, 236: 1043-1049.

[7] HAAF M, HILZ J, PETERS J, et al. Operation of a 1 MWth calcium looping pilot plant firing waste-derived fuels in the calciner［J］. Powder Technology, 2020, 372: 267-274.

[8] MA X T, LI Y J, ZHANG C X, et al. Development of Mn/Mg-copromoted carbide slag for efficient CO2 capture under realistic calcium looping conditions［J］. Process Safety and Environmental Protection, 2020, 141: 380-389.

[9] GONG X Z, ZHANG T, ZHANG J Q, et al. Recycling and utilization of calcium carbide slag-current status and new opportunities［J］. Renewable and Sustainable Energy Reviews, 2022, 159: 112133.

[10] TONG X L, LIU W Q, YANG Y D, et al. A semi-industrial preparation procedure of CaO-based pellets with high CO2 uptake performance［J］. Fuel Processing Technology, 2019, 193: 149-158.

[11] ZHAO H T, ZHANG M. Research progress of CaO-based absorbents prepared from different calcium sources［J］. IOP Conference Series: Earth and Environmental Science, 2020, 474: 052058.

[14] WANG N N, FENG Y C, GUO X. Atomistic mechanisms study of the carbonation reaction of CaO for high-temperature CO2 capture［J］. Applied Surface Science, 2020, 532: 147425.

[16] SUN J, GUO Y F, YANG Y D, et al. Mode investigation of CO2 sorption enhancement for titanium dioxide-decorated CaO-based pellets［J］. Fuel, 2019, 256: 116009.

[17] LEE C H, CHOI S W, YOON H J, et al. Na2CO3-doped CaO-based high-temperature CO2 sorbent and its sorption kinetics［J］. Chemical Engineering Journal, 2018, 352: 103-109.

[18] YANG J, MA L P, LIU H P, et al. Thermodynamics and kinetics analysis of Ca-looping for CO2 capture: application of carbide slag［J］. Fuel, 2019, 242: 1-11.

[19] LIU K, ZHAO B S, WU Y, et al. Bubbling synthesis and high-temperature CO2 adsorption performance of CaO-based adsorbents from carbide slag［J］. Fuel, 2020, 269: 117481.

[20] ZHANG W, LI Y J, HE Z R, et al. CO2 capture by carbide slag calcined under high-concentration steam and energy requirement in calcium looping conditions［J］. Applied Energy, 2017, 206: 869-878.

[21] HE Z R, LI Y J, ZHANG W, et al. Effect of re-carbonation on CO2 capture by carbide slag and energy consumption in the calciner［J］. Energy Conversion and Management, 2017, 148: 1468-1477.

[22] HU Y P, WU S M, LI Y J, et al. H2S removal performance of Ca3Al2O6-stabilized carbide slag from CO2 capture cycles using calcium looping［J］. Fuel Processing Technology, 2021, 218: 106845.

[23] SUN J, SUN Y, YANG Y D, et al. Plastic/rubber waste-templated carbide slag pellets for regenerable CO2 capture at elevated temperature［J］. Applied Energy, 2019, 242: 919-930.

[24] MA X T, LI Y J, DUAN L B, et al. CO2 capture performance of calcium-based synthetic sorbent with hollow core-shell structure under calcium looping conditions［J］. Applied Energy, 2018, 225: 402-412.

[25] TIAN S C, JIANG J G, YAN F, et al. Highly efficient CO2 capture with simultaneous iron and CaO recycling for the iron and steel industry［J］. Green Chemistry, 2016, 18(14): 4022-4031.

[26] TIAN S C, JIANG J G, YAN F, et al. Synthesis of highly efficient CaO-based, self-stabilizing CO2 sorbents via structure-reforming of steel slag［J］. Environmental Science & Technology, 2015, 49(12): 7464-7472.

[27] SUN R Y, XIAO R, YE J M. Kinetic analysis about the CO2 capture capacity of lime mud from paper mill in calcium looping process［J］. Energy Science & Engineering, 2020, 8(11): 4014-4024.

[28] ZHANG Y Q, HE L, MA A H, et al. CaO-based sorbent derived from lime mud and bauxite tailings for cyclic CO2 capture［J］. Environmental Science and Pollution Research, 2018, 25(28): 28015-28024.

[29] MA A H, JIA Q M, SU H Y, et al. Study of CO2 cyclic absorption stability of CaO-based sorbents derived from lime mud purified by sucrose method［J］. Environmental Science and Pollution Research, 2016, 23(3): 2530-2536.

[31] YASIPOURTEHRANI S, TIAN S C, STREZOV V, et al. Development of robust CaO-based sorbents from blast furnace slag for calcium looping CO2 capture［J］. Chemical Engineering Journal, 2020, 387: 124140.

[32] SALAUDEEN S A, TASNIM S H, HEIDARI M, et al. Eggshell as a potential CO2 sorbent in the calcium looping gasification of biomass［J］. Waste Management, 2018, 80: 274-284.

[33] NAWAR A, ALI M, KHOJA A H, et al. Enhanced CO2 capture using organic acid structure modified waste eggshell derived CaO sorbent［J］. Journal of Environmental Chemical Engineering, 2021, 9(1): 104871.

[34] HSIEH S L, LI F Y, LIN P Y, et al. CaO recovered from eggshell waste as a potential adsorbent for greenhouse gas CO2［J］. Journal of Environmental Management, 2021, 297: 113430.

[35] HE S C, HU Y C, HU T D, et al. Investigation of CaO-based sorbents derived from eggshells and red mud for CO2 capture［J］. Journal of Alloys and Compounds, 2017, 701: 828-833.

[36] MOHAMED M, YUSUP S, QUITAIN A T, et al. Utilization of rice husk to enhance calcium oxide-based sorbent prepared from waste cockle shells for cyclic CO2 capture in high-temperature condition［J］. Environmental Science and Pollution Research, 2019, 26(33): 33882-33896.

[37] NAWAR A, GHAEDI H, ALI M, et al. Recycling waste-derived marble powder for CO2 capture［J］. Process Safety and Environmental Protection, 2019, 132: 214-225.

[38] CAI J J, WANG S Z, XIAO Z Z. A study on the CO2 capture and attrition performance of construction and demolition waste［J］. Fuel, 2018, 222: 232-242.

[39] MOHAMED M, YUSUP S, BUSTAM M A, et al. Effect of coal bottom ash and binder addition into Cao-based sorbent on CO2 capture performance［J］. Chemical Engineering Transactions, 2017, 56: 325-330.

[40] YAN F, JIANG J G, LI K M, et al. Cyclic performance of waste-derived SiO2 stabilized, CaO-based sorbents for fast CO2 capture［J］. ACS Sustainable Chemistry & Engineering, 2016, 4(12): 7004-7012.

[41] CHI C Y, LI Y J, MA X T, et al. CO2 capture performance of CaO modified with by-product of biodiesel at calcium looping conditions［J］. Chemical Engineering Journal, 2017, 326: 378-388.

[42] SU C L, DUAN L B, DONAT F, et al. From waste to high value utilization of spent bleaching clay in synthesizing high-performance calcium-based sorbent for CO2 capture［J］. Applied Energy, 2018, 210: 117-126.

[43] ZHANG C Y, YU B Y, CHEN J M, et al. Green transition pathways for cement industry in China［J］. Resources, Conservation and Recycling, 2021, 166: 105355.

[44] ORTIZ C, VALVERDE J M, CHACARTEGUI R. Energy consumption for CO2 capture by means of the calcium looping process: a comparative analysis using limestone, dolomite, and steel slag［J］. Energy Technology, 2016, 4(10): 1317-1327.

[45] BRUNETTI A, SCURA F, BARBIERI G, et al. Membrane technologies for CO2 separation［J］. Journal of Membrane Science, 2010, 359(1/2): 115-125.

[46] ZHANG T Y, CHU G R, LYU J L, et al. CO2 mineralization of carbide slag for the production of light calcium carbonates［J］. Chinese Journal of Chemical Engineering, 2022, 43: 86-98.

[47] ZHANG C X, LI Y J, YANG L G, et al. Analysis on H2 production process integrated CaO/Ca(OH)2 heat storage and sorption enhanced staged gasification using calcium looping［J］. Energy Conversion and Management, 2022, 253: 115169.