• Opto-Electronic Engineering
  • Vol. 48, Issue 3, 200127 (2021)
Zhao Hanzhuo, Gao Nan*, Meng Zhaozong, and Zhang Zonghua
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.12086/oee.2021.200127 Cite this Article
    Zhao Hanzhuo, Gao Nan, Meng Zhaozong, Zhang Zonghua. Method of simultaneous calibration of dual view 3D measurement system[J]. Opto-Electronic Engineering, 2021, 48(3): 200127 Copy Citation Text show less
    References

    [3] Li B W, Zhang S. Superfast high-resolution absolute 3D recovery of a stabilized flapping flight process[J]. Opt Express, 2017, 25(22): 27270–27282.

    [6] Chen M Y, Tang Y C, Zhou X J, et al. High-accuracy multi-camera reconstruction enhanced by adaptive point cloud correction algorithm[J]. Opt Lasers Eng, 2019, 122: 170–183.

    [9] Liu Z, Meng Z Z, Gao N, et al. Calibration of the relative orientation between multiple depth cameras based on a three-dimensional target[J]. Sensors (Basel), 2019, 19(13): 3008.

    [10] Besl P J, McKay N D. A method for registration of 3-D shapes[J]. IEEE Trans Pattern Anal Mach Intell, 1992, 14(2): 239–256.

    [14] Zhang Z, Zhang D, Peng X. Performance analysis of a 3D full-field sensor based on fringe projection[J]. Opt Lasers Eng, 2004, 42(3): 341–353.

    [16] Tsai R Y, Lenz R K. A new technique for fully autonomous and efficient 3D robotics hand/eye calibration[J]. IEEE Trans Robot Autom, 1989, 5(3): 345–358.

    Zhao Hanzhuo, Gao Nan, Meng Zhaozong, Zhang Zonghua. Method of simultaneous calibration of dual view 3D measurement system[J]. Opto-Electronic Engineering, 2021, 48(3): 200127
    Download Citation