[1] Lu Yanping, Gao Longqiao. Surface metallization and welding of aluminum nitride ceramic［J］. Vacuum Science & Technology, 2000, 20(3): 190-193.

[2] Zhan Yujuan, Zhou Lingping, Zhu Jiajun, et al. Influence of AlN ceramic surface state on adhesion of Ti/Ni metallized thin films［J］. The Chinese Journal of Nonferrous Metals, 2011, 21(1): 152-158.

[3] Zheng Honglei, Yang Dean. Advances in research of thick film metallization for AlN［J］. Electronic Components & Materials, 2006, 25(12): 5-7.

[4] Zhou Lingping, Chen Daorui, Peng Kun, et al. Stress control of metalized copper thin film on AlN ceramic surface［J］. Journal of Hunan University (Natural Sciences), 2010, 37(11): 55-59.

[5] Wang Lili. Study on the preparation of Au/Pt powder used for thick film metallization of AlN［D］. Tianjin: Tianjin University, 2010.

[6] Xia Zhangneng, Xu Jie. Mechanism of AIN ceramic electroless plating metallization［J］. Surface Technology, 1999, 28(2): 20-22.

[7] Zhong Xiaojing, Qin Mingli, Li Hui, et al. The technology research of electroless nickel plating on AlN ceramic surface［J］. Vacuum Electronics, 2011, 3: 14-17.

[8] Wang Xiaohong, Zhang Jinqiang, Feng Peizhong, et al. Optimization of bath composition for electroless copper plating on aluminum nitride ceramic surface［J］. Electroplating & Finishing, 2009, 28(12): 25-27.

[9] Jiang Pan. Preparation and properties of copper metallized aluminum nitride substrate by direct bonding copper method［D］. Hunan: Hunan University, 2015.

[10] Li Lei, Wu Jijun, Li Guogang, et al. Manufacturing technologies and applications of AIN DBC substrates［J］. Vacuum Electronics, 2015, 6: 50-53.

[11] Liu Zhen. Study on growth and surface metallization of AlN films［D］. Shanghai: Shanghai University, 2014.

[12] Zhang Shanshan, Yang Huisheng, Yan Luchun, et al. Research on metallization and interface behavior of direct plated copper ceramic substrates［J］. Vacuum Electronics, 2016, 5: 1-6.

[13] Antończak J A, Kozio P E, Stpak B, et al. Direct selective metallization of AlN ceramics induced by laser radiation［C］. SPIE, 2014, 8968: 896814.

[14] Fan Yuanyuan, Zhou Yi, Liu Guangyi, et al. Compound cavity ArF excimer laser with high efficiency［J］. Chinese J Lasers, 2016, 43(2): 0202001.

[15] Kozio P E, Antończak A J, Szymczyk P, et al. Conductive aluminum line formation on aluminum nitride surface by infrared nanosecond laser［J］. Applied Surface Science, 2013, 287(2): 165-171.

[16] Pedraza A J, Esrom J Y, Esrom H. Surface modification of aluminum nitride and of aluminum by excimer laser［J］. Mrs Proceeding, 1992, 285: 209.

[17] Tsetsekou A, Zampetakis T, Stournaras C J,et al. Excimer laser treatment of aluminum nitride［C］. SPIE, 1993, 1810: 615-619.

[18] Esrom H, Pedraza J Y, Pedraza A J. Excimer laser-induced decomposition of aluminum nitride［J］. Mrs Proceeding, 1991, 236: 383.

[19] Liu Wen, Wang Zhiwu, Yang Qingdou, et al. Optical properties of aluminum nitride thin film［J］. Journal of The Chinese Ceramic Society, 2007, 35(5): 616-618.

[20] Hirayama Y, Yabe H, Obara M.Selective ablation of AlN ceramic using femtosecond, nanosecond, and microsecond pulsed laser［J］. Journal of Applied Physics, 2001, 89(5): 2943-2949.

[21] Toenshoff H K, Hesse D, Gedrat O.Gas assisted microstructuring of ceramic materials irradiated with excimer lasers［C］. SPIE, 1993, 1810: 572-576.

[22] Shao Mingzhen, Shao Chunlei, Chen Fei, et al. Effect of gas flow uniformity in discharge chamber of TEA CO2 laser on laser output［J］. Chinese J Lasers, 2016, 43(7): 0701005.

[23] Li Yuanji, Zhao Xin, Feng Jinxia, et al. Stable all-solid-state single-longitudinal-mode pulse laser［J］. Laser & Optoelectronics Progress, 2016, 53(6): 061411.

[24] Bischoff C, Rdel U, Umhofer U, et al. Process optimized beam profiles for laser micromachining［C］. SPIE, 2013, 8600: 860024.

[26] Gilbert T, Krstic V D, Zak G. Machining of aluminium nitride with ultra-violet and near-infrared Nd∶YAG lasers［J］. Journal of Materials Processing Technology, 2007, 189(1): 409-417.