[1] Wen S F, Chen K Y, Li W et al. Selective laser melting of reduced graphene oxide/S136 metal matrix composites with tailored microstructures and mechanical properties[J]. Materials & Design, 175, 107811(2019).

[2] Zhang B C, Xiu M Z, Tan Y T et al. Pitting corrosion of SLM Inconel 718 sample under surface and heat treatments[J]. Applied Surface Science, 490, 556-567(2019).

[3] Khorasani A, Gibson I, Awan U S et al. The effect of SLM process parameters on density, hardness, tensile strength and surface quality of Ti-6Al-4V[J]. Additive Manufacturing, 25, 176-186(2019).

[4] Read N, Wang W, Essa K et al. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development[J]. Materials & Design (1980-2015), 65, 417-424(2015).

[5] Lian G F, Zhang H, Zhang Y et al. Computational and experimental investigation of micro-hardness and wear resistance of Ni-based alloy and TiC composite coating obtained by laser cladding[J]. Materials, 12, 793(2019).

[6] Zhang H, Nie X J, Zhu H H et al. Study on high strength Al-Cu-Mg alloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 43, 0503007(2016).

[7] Zong X W, Gao Q, Zhou H Z et al. Effects of bulk laser energy density on anisotropy of selective laser sintered 316L stainless steel[J]. Chinese Journal of Lasers, 46, 0502003(2019).

[8] Xu J G, Chen Y, Chen H et al. Influence of process parameters on forming defects of H13 steel processed by selective laser melting[J]. Laser & Optoelectronics Progress, 55, 041405(2018).

[9] Zhuo L R, Song B, Zhang Y J et al. Study on CuZnAl memory alloy fabricated by selective laser melting[J]. Journal of Mechanical Engineering, 55, 24-30(2019).

[10] Jin J B, Zhao Y, Zhao S Z et al. Effect of TiN content on microstructure and wear resistance of Ti-based composites produced by selective laser melting[J]. Chinese Journal of Lasers, 46, 1102013(2019).

[11] Yu T B, Song B X, Xi W C et al. Influence of laser cladding process parameters on morphology of cladding layer and its optimization[J]. Journal of Northeastern University(Natural Science), 40, 537-542(2019).

[12] Zheng J X, Ren Y C. Comprehensive assessment of surface integrity in two dimensional ultrasonic rolling 7050 aluminum alloys[J]. China Mechanical Engineering, 29, 1622-1626(2018).

[13] Zhang N, Shi Y Y, Yang C et al. Multi-objective optimization of processing parameters for disc-mill cutter machining blisk-tunnel based on GRA-RBF-FA method[J]. Journal of Northwestern Polytechnical University, 37, 160-166(2019).

[14] Ighravwe D E, Babatunde D E. Evaluation of landfill gas plant siting problem: a multi-criteria approach[J]. Environmental Health Engineering and Management, 6, 1-10(2019).

[15] Ma X Y, Chen H X, Zhang X Y et al. Effect of asphalt binder characteristics on filler-asphalt interactions and asphalt mastic creep properties[J]. Journal of Materials in Civil Engineering, 31, 04019138(2019).

[16] Ghasem F M, Hosein H. Fisher discriminant analysis (FDA), a supervised feature reduction method in seismic object detection[J]. Geopersia, 9, 141-149(2019).

[17] Kavimani V, Prakash K S, Thankachan T. Influence of machining parameters on wire electrical discharge machining performance of reduced graphene oxide/magnesium composite and its surface integrity characteristics[J]. Composites Part B: Engineering, 167, 621-630(2019).

[18] An C, Zhang Y M, Zhang J S. The research of influence of selective laser melting process parameters on density and surface roughness of Co-Cr alloy molding parts[J]. Applied Laser, 38, 328-333(2018).

[19] Liu T T, Liao W H, Zhang K et al. Selective laser melting forming hardness rule of cobalt chromium alloy and its prediction model[J]. Chinese Journal of Lasers, 43, 0303007(2016).

[20] Chen S, Tao F H, Jia C Z. Study on microstructure and properties of 18Ni300 steel fabricated by selective laser melting[J]. Foundry Technology, 40, 657-661(2019).

[21] Pang H. Study on laser melting process and properties of Mo and Mo-5Co alloys[D]. Harbin: Harbin Engineering University, 53-54(2019).

[22] Chen X J, Zhao G R, Dong D D et al. Microstructure and mechanical properties of Inconel625 superalloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 46, 1202002(2019).

[23] Rao X W, Gu D D, Xi L X. Forming mechanism and mechanical properties of carbon nanotube reinforced aluminum matrix composites by selective laser melting[J]. Journal of Mechanical Engineering, 55, 1-9(2019).

[24] Zhang G Q, Yang Y Q, Lin H et al. Study on tribology performance of CoCrMo alloy parts manufactured by selective laser melting[J]. Chinese Journal of Lasers, 43, 0802013(2016).