[1] XIAO J H, XIONG W H, LIN S J, et al. Review on the preparation and application of Ti(C,N)-based cermet composite[J]. Mater Rev, 2010, 24(5): 21-27.
[2] PENG Y, MIAO H Z, PENG Z J. Development of Ti(C,N)-based cermets: Mechanical properties and wear mechanism[J]. Int J Refract Met H, 2013, 39(7): 78-89.
[3] HEYDARI L, LIETOR P F, CORPAS, F A et al. Ti(C,N) and WC-based cermets: a review of synthesis, properties and applications in additive manufacturing[J]. Materials, 2021, 14(22): 6786.
[5] FANG Y H, ZHAO X R, ZHANG M X, et al. Effect of ZrO2 whiskers on the microstructure and mechanical properties of a Ti(C,N)-based cermet cutting tool material[J]. Int J Appl Ceram Tec, 2019, 16(4): 1347-1355.
[6] SHANKAR E, PRABU S B. Microstructure and mechanical properties of Ti(C,N) based cermets reinforced with different ceramic particles processed by spark plasma sintering[J]. Ceram Int, 2017, 43(14): 10817-10823.
[8] KANG X Y, NAN L, HE Y H, et al. Influence of ZrC addition on the microstructure, mechanical properties and oxidation resistance of Ti(C,N)-based cermets[J]. Ceram Int, 2018, 44(10): 11151-11159.
[9] MINATTO F D, MILAK P, DE NONI A, et al. Multilayered ceramic composites-a review[J]. Adv Appl Ceram, 2014, 114(3): 127-138.
[10] BERMEJO, R. "Toward seashells under stress": Bioinspired concepts to design tough layered ceramic composites[J]. J Eur Ceram Soc, 2017, 37(13): 3823-3839.
[11] SUN J L, LIU C X, ZHANG R, et al. Self healing ability and strength recovery of different laminated Al2O3 cutting tool composites[J]. Ceram Int, 2020, 46(12): 20463-20471.
[12] LIU Z, WEI C C, WANG P, et al. Enhanced mechanical properties of laminated ZrB2-SiC ceramics with porous Si3N4 interface[J]. Ceram Int, 2020, 46(10): 17003-17009.
[15] BAZHIN P M, KONSTANTINOV A S, CHIZHIKOV A P, et al. Laminated cermet composite materials: the main production methods, structural features and properties (review)[J]. Ceram Int, 2021, 47(2): 1513-1525.
[17] LIU C X, SUN J L, LI G, et al. Fabrication, mechanical properties and fracture behaviors of the laminated Al2O3-ZrB2-MgO/ Al2O3-TiN-MgO ceramic composite[J]. Ceram Int, 2020, 46(1): 857-865.
[18] WEI C C, LIU Z, ZHANG Z Y, et al. High toughness and R-curve behaviour of laminated SiC/graphite ceramics[J]. Ceram Int, 2020, 46(14): 22973-22979.
[19] LI H Q, CHEN W, ZHAO Z Q, et al. Microstructure, mechanical and tribological properties of Si3N4/Mo-laminated composites[J]. Materials, 2022, 15(8): 2772.
[20] GOTOR F J, BERMEJO R, CORDOBA J M, et al. Processing and characterisation of cermet/hardmetal laminates with strong interfaces[J]. Mater Des, 2014, 58: 226-233.
[21] LI Y Z, ZHAO J. Preparation and mechanical properties of Al2O3/Ti(C,N) sandwich nanocomposite ceramic tool materials[J]. Adv Mater Res, 2010, 97: 1126-1129.
[22] OGHBAEI M, MIRZAEE O. Microwave versus conventional sintering: a review of fundamentals, advantages and applications[J]. J Alloys Compd, 2010, 494(1-2): 175-189.
[24] YIN Z B, YAN S W, XU W W, et al. Microwave sintering of Ti(C,N)-based cermet cutting tool material[J]. Ceram Int, 2017, 44(1): 1034-1040.
[25] HU H P, CHENG Y, YIN Z B, et al. Mechanical properties and microstructure of Ti(C,N) based cermet cutting tool materials fabricated by microwave sintering[J]. Ceram Int, 2015, 41(10): 15017-15023.
[26] ZHANG H A, GU S Y, YI J Y. Fabrication and properties of Ti(C,N) based cermets reinforced by nano-CBN particles[J]. Ceram Int, 2012, 38(6): 4587-4591.
[27] XIAO S Q, GONG M F. Microstructure evolution and sintering kinetics of Ti(C,N)-based cermet[J]. J Phys Conf Ser, 2021, 1777(1): 012069.
[29] CHENG Y, SUN S S, HU H P. Preparation of Al2O3/TiC micro-composite ceramic tool materials by microwave sintering and their microstructure and properties[J]. Ceram Int, 2014, 40(10): 16761-16766.
[32] SONG Y J, YI M D, ZHANG G Q, et al. Design and synthesis of a novel ceramic coating-like tool material[J]. Ceram Int, 2020, 47(3): 4206-4216.
[34] MICHELINE D, HOTZA D, JANSSEN R, et al. Processing and properties of tape-cast alumina/zirconia laminates composites[J]. J Eur Ceram Soc, 2019, 39(12): 3462-3465.
