Theoretical and Experimental Investigation of Fiber Bragg Gratings With Different Lengths for Ultrasonic Detection

Zhouzhou YU; Qi JIANG; Hao ZHANG; and Junjie WANG

doi:10.1007/s13320-016-0307-y

[1] Y. Tan, L. Meng, and D. Zhang, “Strain sensing characteristic of ultrasonic excitation-fiber Bragg gratings damage detection technique,” Measurement, 2013, 46(1): 294-304.

[2] Z. LI, M. Xu, J. Tang, Y. Chen, and Y. Zhao, “A study of signal demodulation techniques in a fiber Bragg grating sensing system,” Industrial Instrumentation and Automation, 2005, (3): 12-16.

[3] V. Italia, A. Cusano, S. Campopiano, A. Cutolo, and M. Giordano, “Analysis of the phase response of fiber Bragg gratings to longitudinal ultrasonic fields in the high frequency regime: towards new interrogation strategies,” in Proceedings of 2005 IEEE/LEOS Workshop on Fibers and Optical Passive Components, Italy, pp. 389–392, 2005.

[4] B. Sorazu, G. Thursby, and B. Culshaw, “Wavefront integrating fiber sensors for ultrasonic detection,” IEEE Sensors Journal, 2011, 11(7): 1623-1631.

[5] P. M. Lam, K. T. Lau, H. Y. Ling, Z. Su, and H. Y. Tam, “Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor,” Optics & Lasers in Engineering, 2009, 47(10): 1049-1055.

[6] J. Lee, H. Tsuda, and N. Toyama, “Impact wave and damage detections using a strain-free fiber Bragg grating ultrasonic receiver,” NDT & E International, 2007, 40(1): 85-93.

[7] T. Liu and M. Han, “Analysis of fiber Bragg gratings for ultrasonic detection,” IEEE Sensors Journal, 2012, 12(7): 2368-2373.

[8] G. Wild and S. Hinckley, “Spatial performance of acousto-ultrasonic fiber Bragg grating sensor,” IEEE Sensors Journal, 2010, 10(4): 805-806.

[9] H. Zhu, J. Yu, and J. Zhang, “A summary review and advantages of vibration-based damage identification methods in structural health monitoring,” Engineering Mechanics, 2011, 28(2): 1-6.

[10] T. Erdogan, “Fiber grating spectra,” Journal of Lightwave Technology, 1997, 15(8): 1277-1294.

[11] M. Majumder, T. K. Gangopadhyay, A. K. Chakraborty, K. Dasgupta, and D. K. Bhattacharya, “Fiber Bragg gratings in structural health monitoring—present status and applications,” Sensors and Actuators A: Physical, 2008, 147(1): 150-164.

[12] J. Song, Q. Jiang, Y. Huang, Y. Li, Y. Jia, X. Rong, et al., “Research on pressure tactile sensing technology based on fiber Bragg grating array,” Photonic Sensors, 2015, 5(3): 1-10.

[13] Q. C. Wang, Y. E. Xian-Feng, Y. L. Cao, and L. Y. Zhan, “Detection of focused ultrasonic fields with fiber Bragg grating,” Journal of Transcluction Technology, 2005, 18(1): 171-174.

[14] H. Zhang, X. Sun, X. Qi, X. Liu, and H. Dong, “Ultrasonic lamb wave inspection using fiber Bragg gratings,” in IEEE 2008 China-Japan Joint Microwave Conference, Shanghai, pp. 805-808, 2008.

[15] G. Coppola, A. Minardo, A. Cusano, G. Breglio, L. Zeni, A. Cutolo, et al., “Analysis of feasibility on the use of fiber Bragg grating sensors as ultrasound detectors,” in Proc. SPIE, vol. 4328, pp. 224-232, 2001.

[16] N. E. Fisher, D. J. Webb, C. N. Pannell, D. A. Jackson, L. R. Gavrilov, J. W. Hand, et al., “Ultra-sonic field and temperature sensor based on short in-fiber Bragg gratings,” Electronics Letters, 1998, 34(11): 1139-1140.