• Infrared and Laser Engineering
  • Vol. 50, Issue 5, 20200492 (2021)
Xuming Wang1、2, Wei Huang1、2, Bingxian Zhang1、2, Jiuzhe Wei1、2, Xuxia Zhuang1、2, Qiufeng Lv1、2, and Haibin Jiang1、2
Author Affiliations
  • 1Beijing Institute of Space Mechanics and Electricity, Beijing 100094, China
  • 2Beijing Key Laboratory of Advanced Optical Remote Sensing Technology, Beijing 100094, China
  • show less
    DOI: 10.3788/IRLA20200492 Cite this Article
    Xuming Wang, Wei Huang, Bingxian Zhang, Jiuzhe Wei, Xuxia Zhuang, Qiufeng Lv, Haibin Jiang. Real-time calculation method of integral time based on interframe angle point matching[J]. Infrared and Laser Engineering, 2021, 50(5): 20200492 Copy Citation Text show less
    Integration time real-time measurement system based on interframe angle matching distance measurement
    Fig. 1. Integration time real-time measurement system based on interframe angle matching distance measurement
    Schematic diagram of calculating system principle
    Fig. 2. Schematic diagram of calculating system principle
    Schematic diagram of high frequency array CMOS image motion velocity V2calculation
    Fig. 3. Schematic diagram of high frequency array CMOS image motion velocity V2calculation
    Elimination effect of prior knowledge on Harris angle point mismatching
    Fig. 4. Elimination effect of prior knowledge on Harris angle point mismatching
    Matching effect optimized by Harris algorithm
    Fig. 5. Matching effect optimized by Harris algorithm
    Simulation results of measurement accuracy after sub-pixel positioning(Matching errors of zero are not shown in the figure above)亚像元定位后测量精度仿真结果(匹配误差为0的点对在上图中未作显示)
    Fig. 6. Simulation results of measurement accuracy after sub-pixel positioning(Matching errors of zero are not shown in the figure above) 亚像元定位后 测量精度仿真结果(匹配误差为0的点对在上图中未作显示)
    Relationship between TDI stage and TDI级数与的关系
    Fig. 7. Relationship between TDI stage and TDI级数与 的关系
    Before optimizationAfter optimization
    Nunber of feature points detected343/527118/201
    Logarithm of feature points match8814
    Validity ratio of feature points10.11%4.38%
    Logarithm of mismatched points121
    Mismatch ratio13.63%7.14%
    Code execution time/s2.5391.325
    Mean of matching precision0.04310.0394
    Table 1. Before and after optimization with Harris algorithm
    Integration stages${ { {MT\!F} }_{\Delta { {{T} }_{\rm{int} } } } }$(0.1 pixel precision) ${ { {MT\!F} }_{\Delta { {{T} }_{ {int} } } } }$(0.2 pixel precision)
    60.99890.9976
    120.99570.9905
    240.98300.9622
    480.93290.8540
    720.85290.6899
    960.74780.4915
    Table 2. Influence factors of integral-time residual error on image quality in different TDI stages
    Xuming Wang, Wei Huang, Bingxian Zhang, Jiuzhe Wei, Xuxia Zhuang, Qiufeng Lv, Haibin Jiang. Real-time calculation method of integral time based on interframe angle point matching[J]. Infrared and Laser Engineering, 2021, 50(5): 20200492
    Download Citation