• Chinese Journal of Lasers
  • Vol. 41, Issue 6, 603005 (2014)
Zou Jianglin*, Li Fei, Niu Jianqiang, Kong Xiaofang, Ma Ran, and Xiao Rongshi
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/cjl201441.0603005 Cite this Article Set citation alerts
    Zou Jianglin, Li Fei, Niu Jianqiang, Kong Xiaofang, Ma Ran, Xiao Rongshi. Effect of Laser-Induced Plume on Welding Process During High Power Fiber Laser Welding[J]. Chinese Journal of Lasers, 2014, 41(6): 603005 Copy Citation Text show less
    References

    [1] S Ruppik, F Becker, F P Grundmann, et al.. High power disk and fiber lasers-a performance comparison[C]. SPIE, 2012, 8235: 82350V.

    [2] L Quintino, A Costa, R Miranda, et al.. Welding with high power fiber lasers-a preliminary study[J]. Materials and Design, 2007, 28(4): 1231-1237.

    [3] Cai Hua, Kong Xiaofang, Xiao Rongshi. Effect of surface status on microstructures and solidification cracking susceptibility in laser beam welding of 2524 aluminum alloy[J]. Chinese J Lasers, 2013, 40(2): 0203002.

    [4] Zou Jianglin, Wu Shikai, Xiao Rongshi, et al.. Comparison of melting efficiency in high power fiber laser and CO2 laser welding[J]. Chinese J Lasers, 2013, 40(8): 0803002.

    [5] Chen Genyu, Kang Bin, Zhang Yi, et al.. Effects of incident angle on welding performance of fiber laser butt welding of high-strength automobile steel[J]. Chinese J Lasers, 2012, 39(1): 0103008.

    [6] J Wang, C Wang, X Meng, et al.. Study on the periodic oscillation of plasma/vapour induced during high power fibre laser penetration welding[J]. Opt & Laser Technol, 2012, 44(1): 67-70.

    [7] Y Kawahito, K Kinoshita, N Matsumoto, et al.. Effect of weakly ionised plasma on penetration of stainless steel weld produced with ultra high power density fibre laser[J]. Sci Technol Weld Joi, 2008, 13(8): 749-753.

    [8] Y Kawahito, N Matsumoto, M Mizutani, et al.. Characterisation of plasma induced during high power fibre laser welding of stainless steel[J]. Sci Technol Weld Joi, 2008, 13(8): 744-748.

    [9] P Y Shcheglov, S A Uspenskiy, A V Gumenyuk, et al.. Plume attenuation of laser radiation during high power fiber laser welding[J]. Laser Phys Lett, 2011, 8(6): 475-480.

    [10] P Y Shcheglov, A V Gumenyuk, I B Gornushkin, et al.. Vapor-plasma plume investigation during high-power fiber laser welding[J]. Laser Phys, 2013, 23(1): 016001.

    [11] Rongshi Xiao, JianglinZou. Studying on characteristics of plume/plasma in fiber laser welding and CO2 laser welding[C]. 31st International Congress on Applications of Lasers & Electro-Optics (ICALEO), 2012.

    [12] Lampa, A F H Kaplan, J Powell, et al.. An analytical thermodynamic model of laser welding[J]. J Phys D: Appl Phys, 1997, 30(9): 1293-1299.

    CLP Journals

    [1] Zhao Shengbin, Yang Lijun, Liu Tong, Yang Ruixia, Pan Jiajing, Qiu Wencong. Electrical Signal Characteristics of Plasma in YAG Laser Welding of A304 Stainless Steels Under Different Modes[J]. Chinese Journal of Lasers, 2016, 43(12): 1202005

    [2] Yang Ruixia, Yang Lijun, Liu Tong, Zhao Shengbin. Spectral Analysis of Laser Induced Plasma Electrical Signals from NdYAG Laser Welding of A304 Stainless Steels[J]. Chinese Journal of Lasers, 2016, 43(8): 802008

    Zou Jianglin, Li Fei, Niu Jianqiang, Kong Xiaofang, Ma Ran, Xiao Rongshi. Effect of Laser-Induced Plume on Welding Process During High Power Fiber Laser Welding[J]. Chinese Journal of Lasers, 2014, 41(6): 603005
    Download Citation