Effect of Co Content and Microcracks on Laser Shock Resistance of WC Nozzle

Wu Yue; Chenggong Gong; Wei Hu; Zimao Wu

doi:10.3788/LOP222498

[1] Yang Y Q, Wu S B, Zhang Y et al. Application progress and prospect of fiber laser in metal additive manufacturing[J]. Chinese Journal of Lasers, 47, 0500012(2020).

[2] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[3] Huang W, Zhou Z Y, Cui Y L et al. 4.5 W 3.1 μm mid-infrared fiber gas laser[J]. Chinese Journal of Lasers, 49, 0101024(2022).

[4] Chen L H, Yang G W, Liu Y X. Development of semiconductor lasers[J]. Chinese Journal of Lasers, 47, 0500001(2020).

[5] Wang F, Ding M M, Shen D Y et al. Research progress of LD-pumped 3 μm Er-doped solid-state lasers[J]. Chinese Journal of Lasers, 49, 0101008(2022).

[6] Guo X Y, Ni M, Liu H M et al. Design and numerical simulation of broad coaxial powder feeding nozzles for laser cladding[J]. Laser Technology, 42, 362-368(2018).

[7] Zhou Z F, Wang R, Wang G X et al. Effect of nozzle size on the surface heat transfer dynamics during cryogen spray cooling in dermatologic laser surgery[J]. Chinese Journal of Lasers, 39, 0303005(2012).

[8] Yue W, Gong C G, Zhang J X et al. Analysis on tin spattering of a micro solder joint during laser jet solder ball bonding process[J]. Chinese Journal of Lasers, 47, 0802010(2020).

[9] Kasulke P, Schmidt W, Titerle L et al. Solder ball bumper SB2 - a flexible manufacturing tool for 3-dimensional sensor and microsystem packages[C], 70-75(1998).

[10] Li H N, Yan L, Zhang H M et al. Effects of sintering temperature on interface microstructure and element diffusion of WC-Co-Ni-Fe/high-speed steel composites[J]. Materials Letters, 310, 131449(2022).

[11] García J, Ciprés V C, Blomqvist A et al. Cemented carbide microstructures: a review[J]. International Journal of Refractory Metals and Hard Materials, 80, 40-68(2019).

[12] Wu X, Shen J Y, Jiang F et al. Study on the oxidation of WC-Co cemented carbide under different conditions[J]. International Journal of Refractory Metals and Hard Materials, 94, 105381(2021).

[13] Matthews M, Trapp J, Guss G et al. Direct measurements of laser absorptivity during metal melt pool formation associated with powder bed fusion additive manufacturing processes[J]. Journal of Laser Applications, 30, 032302(2018).

[14] Han Z W, Jiao Z B, Niu S C et al. Ascendant bioinspired antireflective materials: opportunities and challenges coexist[J]. Progress in Materials Science, 103, 1-68(2019).

[15] Jiao Z Z, Li J C, Chen Z D et al. Research progress on laser processing of antireflection surfaces[J]. Chinese Journal of Lasers, 48, 0202011(2021).