[1] Cai Y D, Xie B, Ling S Y et al. On-line measurement method for diameter and roundness error of balls[J]. Nanomanufacturing and Metrology, 3, 218-227(2020).

[2] Sun C Z, Wang L, Tan J B et al. A high-accuracy roundness measurement for cylindrical components by a morphological filter considering eccentricity, probe offset, tip head radius and tilt error[J]. Measurement Science and Technology, 27, 085008(2016).

[3] Fan K C, Wang N, Wang Z W et al. Development of a roundness measuring system for microspheres[J]. Measurement Science and Technology, 25, 064009(2014).

[4] Zhu C Y, Zhao T, Liu Q et al. Research on measurement technology of dowel roundness based on machine vision[J]. Computer Technology and Development, 30, 216-220(2020).

[5] Liu Q M, Zhang L, Wu L Q et al. Roundness error evaluation of non-uniformly distributed data points based on machine vision[J]. Acta Metrologica Sinica, 37, 567-570(2016).

[6] Liu J, Li H, Chang H M et al. System contributing to install inside sleeve and filtering algorithm to evaluate its roundness error[J]. Chinese Journal of Lasers, 41, 0608002(2014).

[7] Jennings J K, McGruder CH. Comparison of the disk diffraction pattern with the straight-edge diffraction pattern in occultations[J]. Astronomical Journal, 118, 3061-3067(1999).

[8] Luo X H, Hui M. Measurement of circular aperture diameter based on Fresnel diffraction[J]. Laser & Infrared, 48, 379-383(2018).

[9] Liang Q T[M]. Physical optics, 221-225(2008).

[10] Wang Y C. Projection caliper system based on linear CCD image sensor[D], 34-50(2016).

[11] Bai X D, Shu Q, Du X Y et al. Improved adaptive bilateral filtering algorithm[J]. Laser & Optoelectronics Progress, 57, 041003(2020).

[12] Li Q X, Wang L F, Jin J F. A histogram equalization de-fogging algorithm based on Butterworth low-pass filtering[J]. Journal of Beijing Electronic Science and Technology Institute, 27, 61-67(2019).

[13] Xu C, Ping X L. Line detection algorithm based on improved random Hough transformation[J]. Laser & Optoelectronics Progress, 56, 051001(2019).

[14] Qu J, Gan L. The application of grads Hough transformation in circle detection[J]. Journal of East China Jiaotong University, 24, 101-104(2007).

[15] Li X M, Zhang J C, Liu H Q. Determination of the minimum zone circle based on the minimum circumscribed circle[J]. Measurement Science and Technology, 25, 017002(2014).

[16] Huang L F, Wang W, Wu N X. Research of circle fitting and error evaluation algorithm based on least square principle[J]. Mechanical Engineering & Automation, 4-6(2020).

[17] Li X M, Shi Z Y. The relationship between the minimum zone circle and the maximum inscribed circle and the minimum circumscribed circle[J]. Precision Engineering, 33, 284-290(2009).

[18] Jywe W Y, Liu C H, Chen C K. The min-max problem for evaluating the form error of a circle[J]. Measurement, 26, 273-282(1999).

[19] Wang B J, Xu L, Zeng W Y et al. New measuring method of fiber alignment in precision torsion pendulum experiments[J]. Chinese Physics B, 29, 080401(2020).