• Laser & Optoelectronics Progress
  • Vol. 60, Issue 23, 2312002 (2023)
Fengrui Ma, Fajie Duan*, Wenzheng Liu, Xiao Fu, and Cong Zhang
Author Affiliations
  • State Key Lab of Precision Measuring Technology & Instruments, Tianjin University, Tianjin 300072, China
  • show less
    DOI: 10.3788/LOP223032 Cite this Article Set citation alerts
    Fengrui Ma, Fajie Duan, Wenzheng Liu, Xiao Fu, Cong Zhang. Self-Calibration Method for Roll Angle Measurements of Dual Beams Based on Polarization[J]. Laser & Optoelectronics Progress, 2023, 60(23): 2312002 Copy Citation Text show less
    Structure diagram of self-calibration roll angle measurement based on polarization splitting
    Fig. 1. Structure diagram of self-calibration roll angle measurement based on polarization splitting
    Measuring principle of roll angle based on dual beam. (a) Optical configuration; (b) relationship between roll angle and light spot positions of QD1 and QD2
    Fig. 2. Measuring principle of roll angle based on dual beam. (a) Optical configuration; (b) relationship between roll angle and light spot positions of QD1 and QD2
    Roll error measurement caused by non-parallelism. (a) Optical configuration; (b) position of light spot on QD1 and QD2
    Fig. 3. Roll error measurement caused by non-parallelism. (a) Optical configuration; (b) position of light spot on QD1 and QD2
    Light path of roll angle based on dual beam
    Fig. 4. Light path of roll angle based on dual beam
    Principle of roll angle measurement based on polarization splitting. (a) Optical configuration; (b) relationship between polarization direction and PBS attitude
    Fig. 5. Principle of roll angle measurement based on polarization splitting. (a) Optical configuration; (b) relationship between polarization direction and PBS attitude
    Incident angle deviates from the Brewster angle
    Fig. 6. Incident angle deviates from the Brewster angle
    Flow chart of the self-calibration roll angle measurement
    Fig. 7. Flow chart of the self-calibration roll angle measurement
    Mechanical structure of measuring device
    Fig. 8. Mechanical structure of measuring device
    Ground noise test experiments. (a) Shield; (b) ground noise test of QD; (c) ground noise test of PD
    Fig. 9. Ground noise test experiments. (a) Shield; (b) ground noise test of QD; (c) ground noise test of PD
    Vertical straightness calibration experiment. (a) Experimental device; (b) performance test
    Fig. 10. Vertical straightness calibration experiment. (a) Experimental device; (b) performance test
    Repeatability error experiment
    Fig. 11. Repeatability error experiment
    Roll angle calibration experiment. (a) Experimental device; (b) performance test
    Fig. 12. Roll angle calibration experiment. (a) Experimental device; (b) performance test
    Non-parallelism measurement and calibration effect. (a) Non-parallelism measurement; (b) calibration effect
    Fig. 13. Non-parallelism measurement and calibration effect. (a) Non-parallelism measurement; (b) calibration effect
    Distance /mResidual without calibration /(''Residual with calibration /(''Improvement rate /%
    0.759.05-2.4872.59
    1.0019.83-3.2283.76
    1.2530.40-4.1886.26
    1.5046.160.0599.89
    1.7559.601.9696.71
    2.0073.103.9494.61
    Table 1. Accuracy improvement of roll angle based on dual beam
    Fengrui Ma, Fajie Duan, Wenzheng Liu, Xiao Fu, Cong Zhang. Self-Calibration Method for Roll Angle Measurements of Dual Beams Based on Polarization[J]. Laser & Optoelectronics Progress, 2023, 60(23): 2312002
    Download Citation