Design for Holey Fiber Broadband Wave Plate by Reducing the Perturbation Sensitivity of the Air Hole Parameters

Lin Jianqiang; Shi Zhidong; Liu Zhen; Ji Minning

doi:10.3788/lop51.020603

[1] H C Lefevre. Single-mode fibre fractional wave devices and polarisation controllers[J]. Electron Lett, 1980, 16(20): 778-780.

[2] Xiang Yongjiang. Research on ordinary single-mode fibre wave plates and polarization controllers[J]. Acta Aeronautica et Astronautica Sinica, 1992, 13(6): B335-B338.

[3] Xiang Yongjiang. Frequency shifter and polarization controller based on birefringence of bending ordinary single-mode fibre[J]. Acta Optica Sinica, 1990, 10(1): 79-83.

[4] Yao Yi, Shi Kun, Lu Weidong, et al.. In-line single mode fiber polarization controller[J]. Acta Optica Sinica, 1995, 15(5): 636-640.

[5] Ruan Yinglan, Xiang Qing, Huang Dexiu. Bending-induced birefringence in single-mode fiber and its measurement[J]. Chinese J Lasers, 1996, 23(10): 901-905.

[6] H -C Huang. Fiber-optic analogs of bulk-optic wave plates[J]. Appl Opt, 1997, 36(18): 4241-4258.

[7] S X Short, A A Tselikov, de Arruda J U, et al.. Imperfect quarter-waveplate compensation in Sagnac interferometer-type current sensors[J]. J Lightwave Technol, 1998, 16(7): 1212-1219.

[8] A H Rose, N Feat, S M Etzel. Wavelength and temperature performance of polarization transforming fibers[J]. Appl Opt, 2003, 42 (34): 6897-6904.

[9] Xiaozhen Wang, Xiaopeng Dong, Zuosheng Xie. Measurement and analysis of the birefringence of photonic crystal fiber with wavelength scanning method[J]. Opt Quantum Electron, 2007, 39(12-13): 1081-1090.

[10] Zhidong Shi, Minning Ji, Jianqiang Lin, et al.. Quarter wave plate made by cutting straight holey birefringent fiber[C]. SPIE, 2008, 7134: 713449.

[11] Dong Xiaopeng, Xie Zuosheng, Wang Xiaozhen, et al.. Design and analysis of novel wave-plate made by the photonic crystal fibers[J]. J Optoelectronics·Laser, 2006, 17(suppl.): 125-127.

[12] Xiaopeng Dong, Jiajian Hao, Juan Su, et al.. Temperature stabilized and broadband fiber waveplate fabricated with a birefringent photonic crystal fiber[J]. Frontiers of Optoelectronics in China, 2010, 3(1): 9-12.

[13] Shi Zhidong, He Wei, Lin Jianqiang, et al.. Influence of lateral deformation on polarization beat-length dispersion of holey birefringence fiber[J]. Laser & Optoelectronics Progress, 2010, 47(12): 120601.

[14] Lin Jianqiang, Shi Zhidong, He Wei, et al.. Optimization of polarization beat length stability of rectangular lattice microstructure optical fiber[J]. Laser & Optoelectronics Progress, 2011, 48(11): 110608.

[15] Li Mingjia, Shi Zhidong, Lin Jianqiang, et al.. Optimized design for rectangular lattice holey birefringent fiber with wideband stable beat length[J]. Acta Optica Sinica, 2010, 30(7): 1950-1954.

[16] Shi Zhidong, Lin Jianqiang, Li Mingjia, et al.. Optimal design for holey birefringence fiber with stable polarization beat-length in super-wide band[J]. Acta Optica Sinica, 2010, 30(s1): s100303.

[17] Li Mingjia, Shi Zhidong, Yin Jun, et al.. Design for holey fiber with birefringent beat length independent of wavelength[J]. Acta Optica Sinica, 2010, 30(3): 665-670.