Influence of nitrogen ion implantation on surface charge accumulation and dissipation of polytetrafluoroethylene

Chang Liu; Falun Song; Mingdong Zhu; Chunxia Li; Beizhen Zhang; Fei Li; Ganping Wang; Haitao Gong; Yanqing Gan; Xiao Jin

doi:10.11884/HPLPB202032.200045

[3] Zhang Guanjun, Su Guoqiang, Song Baipeng. Pulsed flashover across a solid dielectric in vacuum[J]. IEEE Trans Dielectrics and Electrical Insulation, 25, 2321-2339(2018).

[4] Yan Ping, Shao Tao, Wang Jue. Experimental investigation of surface flashover in vacuum using nanosecond pulses[J]. IEEE Trans Dielectrics and Electrical Insulation, 14, 634-642(2007).

[5] Ma Guoming, Zhou Hongyang, Li Chengrong. Designing epoxy insulators in SF₆-filled DC-GIL with simulations of ionic conduction and surface charging[J]. IEEE Trans Dielectrics and Electrical Insulation, 22, 3312-3320(2015).

[6] Kindersberger J, Lederle C. Surface charge decay on insulators in air and sulfurhexafluorid—part I: simulation[J]. IEEE Trans Dielectrics and Electrical Insulation, 15, 941-948(2008).

[7] Kindersberger J, Lederle C. Surface charge decay on insulators in air and sulfurhexafluorid—part II: measurements[J]. IEEE Trans Dielectrics and Electrical Insulation, 15, 949-957(2008).

[8] Vu C T, Zavattoni L, Vinson P, et al. Surface ge measurements on epoxy spacer in HVDC GISGIL in SF6[C]IEEE Conference on Electrical Insulation Dielectric Phenomena. 2016.

[9] Lutz B, Kindersberger J. Surface charge accumulation on cylindrical polymeric model insulators in air: simulation and measurement[J]. IEEE Trans Dielectrics and Electrical Insulation, 18, 2040-2048(2011).

[10] Li Chuanyang, Hu Jun, Lin Chuanjie. Surface charge migration and dc surface flashover of surface-modified epoxy-based insulators[J]. Journal of Physics D: Applied Physics, 50, 065301(2017).

[11] Yamamoto O, Takuma T, Fukuda M. Improving withstand voltage by roughening the surface of an insulating spacer used in vacuum[J]. IEEE Trans Dielectrics and Electrical Insulation, 10, 550-556(2003).

[12] Hosono T, Kato K, Morita A. Surface charges on alumina in vacuum with varying surface roughness and electric field distribution[J]. IEEE Trans Dielectrics and Electrical Insulation, 14, 627-633(2007).

[14] Li Shengtao, Huang Qifeng, Sun Jian. Effect of traps on surface flashover of XLPE in vacuum[J]. IEEE Trans Dielectrics and Electrical Insulation, 17, 964-970(2010).

[15] Li Chengrong, Ding Lijian, Lu Jinzhuang. The relation of trap distribution of alumina with surface flashover performance in vacuum[J]. IEEE Trans Dielectrics and Electrical Insulation, 13, 99-102(2006).

[16] Zhao Wenbin, Zhang Guanjun, Yang Yun. Correlation between trapping parameters and surface insulation strength of solid dielectric under pulse voltage in vacuum[J]. IEEE Trans Dielectrics and Electrical Insulation, 14, 170-178(2007).

[17] Zhu Mingdong, Song Falun, Li Fei. Surface insulating properties of titanium implanted alumina ceramics by plasma immersion ion implantation[J]. Nuclear Instruments and Methods in Physics Research, Section B. Beam Interactions with Materials and Atoms, 407, 155-159(2017).

[18] Guo Baohong, Wang Yibo, Su Guoqiang, et al. Influence of surface modification by direct fluination on dielectric flashover acteristics in vacuum[C] International Conference on Electrical Materials & Power Equipment. 2017.

[19] Duan Li, Liu Wenyuan, Ke Changfeng. Significantly improved surface flashover characteristics of insulators in vacuum by direct fluorination[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 456, 1-9(2014).

[21] Cross J D, Sudarshan T S. The effect of cuprous oxide coatings on surface flashover of dielectric spacers in vacuum[J]. IEEE Trans Electrical Insulation, 9, 146-150(1974).

[22] Chen Sile, Wang Shuai, Wang Yibo. Surface modification of epoxy resin using He/CF₄ atmospheric pressure plasma jet for flashover withstanding characteristics improvement in vacuum[J]. Applied Surface Science, 414, 107-113(2017).

[23] Zhang Cheng, Lin Haofan, Zhang Shuai. Plasma surface treatment to improve surface charge accumulation and dissipation of epoxy resin exposed to dc and nanosecond-pulse voltages[J]. Journal of Physics D: Applied Physics, 50, 405203(2017).

[26] Fu R K Y, Cheung I T L, Mei Y F. Surface modification of polymeric materials by plasma immersion ion implantation[J]. Nuclear Instruments & Methods in Physics Research, Section B, 237, 417-421(2005).

[27] Zhang Jizhong, Yu Xiaojun, Li Hengde. Surface modification of polytetrafluoroethylene by nitrogen ion implantation[J]. Applied Surface Science, 185, 255-261(2002).

[30] Conrad J R, Castagna T. Plasma source ion implantation for surface modification[J]. Bulletin of the American Physical Society, 31, 1479(1986).

[31] Song Falun, Li Fei, Zhu Mingdong. Development and experimental study of large size composite plasma immersion ion implantation device[J]. Plasma Science & Technology, 20, 014013(2018).

[34] Cherdoud-Chihani A, Mouzali M, Abadie M J M. Study of crosslinking acid copolymer/DGEBA systems by FTIR[J]. Journal of Applied Polymer Science, 87, 2033-2051(2003).

[35] Hai Bin, Zhang Cheng, Wang Ruixue, et al. Research of depositing SiO2like film on epoxy resin surface using atmospheric pressure plasma jet[C]IEEE International Conference on Plasma Science. 2016.

[36] Simmons J G, Tam M C. Theory of isothermal currents and the direct determination of trap parameters in semiconductors and insulators containing arbitrary trap distributions[J]. Physical Review B, 7, 3706-3713(1973).