Research on Technics of TiC Hardened Coating Prepared by Hybrid Process of Laser and Sol-Gel

Zeng Qi; Zhang Qunli; Xu Ning; Yao Jianhua

doi:10.3788/lop49.071602

[1] Liu Yang, Zeng Lingke. Titanium Carbide Ceramics and Application［M］. Beijing: Beijing Industry Press, 2008

[2] Qu Shiyao, Wang Xinhong, Zhang Min et al.. Microstructure and wear properties of Fe-TiC surface composite coating by laser cladding［J］. J. Mater. Sci., 2008, 43(5): 1546～1551

[3] Xin Yanhui, Lin Jianguo, Ren Zhiang. Microstructure characteristics and wear resistance of TiC particle reinforced coatings by laser surface alloying in a Ti-Al-Cr-Nb-V alloy［J］. Transactions of Materids and Heat Treatment, 2004, 25(4): 63～66

[4] W. H. Jiang, R. Kovacevic. Laser deposited TiC/H13 tool steel composite coatings and their erosion resistance ［J］. J. Mater. Process. Technol., 2007, 186(1-3): 331～338

[5] R. L. Sun, Y. W. Lei, W. Niu. Laser clad TiC reinforced NiCrBSi composite coatings on Ti-6Al-4V alloy using a CW CO2 laser ［J］. Surf. Coat. Technol., 2009, 203(10-11): 1395～1399

[6] Yang Sen, Liu Wenjin, Zhong Minlin. TiC reinforced composite coating produced by powder feeding laser cladding ［J］. Mater. Lett., 2004, 58(24): 2958～2962

[7] Chen Wei, Ma Xiangping, Feng Jianlin. Study on process of laser cladding TiCNi coating on Al alloy by SHS reaction［J］. Hot Working Technology, 2009, 38(10): 131～134

[8] Tian Yongsheng, Chen Chuanzhong, Wang Deyun et al.. Analysis of the growth mechanism of TiC crystal and the mechanical properties of the laser alloyed layer on the surface of pure titanium［J］. Laser Technology, 2005, 29(2): 113～117

[9] G. A. Swift, R. Koc. Formation studies of carbon coater TiO2［J］. J. Mater. Sci., 1999, 34(13): 3083～3093

[10] Henry Preiss, Lutz-Michael Berger, Dietrich Schultze. Studies on the carbothermal preparation of titanium carbide from different gel precursors［J］. J. Eur. Ceram. Soc., 1999, 19(2): 195～206

[11] Song Mousheng, Liu Zhongxia, Li Jiwen et al.. Effect of titanium alloying manner and titanium content on microstructure and mechanical properties of A365 alloys［J］. Chinese of J. Nonferrous Metals, 2004, 14(10): 1729～1735