[1] Dabral M, Francis L F, Scriven L E. Drying process paths of ternary polymer solution coating［J］. AIChE Journal, 2002, 48(1): 25-37.
[2] Li H Y, Mei J G, Ayzner A L, et al. A simple droplet pinning method for polymer film deposition for measuring charge transport in a thin film transistor［J］. Organic Electronics, 2012, 13(11): 2450-2460.
[3] Burghelea T I, Grieβ H J, Münstedt H. An in situ investigation of the draw resonance phenomenon in film casting of a polypropylene melt［J］. Journal of Non-Newtonian Fluid Mechanics, 2012, 173/174: 87-96.
[4] Hagen T. On the membrane approximation in isothermal film casting［J］. Zeitschrift für angewandte Mathematik und Physik, 2014, 65: 729-745.
[5] Arya R K. Measurement of concentration profiles in thin film binary polymer-solvent coatings using confocal Raman spectroscopy: Free volume model validation［J］. Drying Technology, 2014, 32(8): 992-1002.
[6] Bhargava C K, Arya R K. Design of binary polymeric coatings for minimizing the residual solvent, part I: Experimentation［J］. Drying Technology, 2015, 33(1): 92-102.
[7] Arya R K, Bhargava C K. Simulation analysis of drying of ternary polymeric solution coatings［J］. Progress in Organic Coatings, 2015, 78: 155-167.
[8] Mohammad K, Fateme A. Analyzing the diffusion process for polymer solution using FTIR-ATR technique: Special considerations［J］. Journal of Textiles and Polymers, 2013, 1(1): 1-8.
[9] Liu Mingren, Yang Xueyu, Wang Li, et al. Determination of benzene series compounds in oil paints by internal standard method using GC/MS［J］. Environmental Science & Technology, 2011, 34(11): 135-138.
[10] Zhang Ren. Standardized design of liquid sample testing process based on Raman spectra and its influencing factors［J］. Shanghai Measurement and Testing, 2016, 43(6): 9-12.
[11] Schuster J J, Siegler P, Guenther A, et al. Simultaneous analysis of the dispersed liquid and the bulk gas phase of water sprays using Raman spectroscopy［J］. Applied Spectroscopy, 2016, 70(6): 1055-1062.
[12] Wang Qin, Zhao Chang, Yang Huinan, et al. Simultaneous measurement of film thickness and mass fraction by Raman spectroscopy［J］. Laser & Optoelectronics Progress, 2016, 53(9): 093001.
[13] Liu Minghui. UV transmission fiber performance analysis and preparation methods［D］. Shenyang: School of Science Shenyang University of Technology, 2013.
[14] Lin Song, Wei Yan, Sun Wei, et al. Semi-interpenetrating interfacial formation of glass fiber reinforced dental resin bio-composites and its mechanical properties［J］. Acta Materiae Compositae Sinica, 2009, 26(6): 85-90.
[15] Zhang Xuzhe, Chen Lijun, Huang Feng, et al. Comparative study on the effect of different strengthening agents on soil anti-weathering reinforcement in archaeological exploration party［J］. Chemical Intermediate, 2017(1): 91-93.
[16] Wu Jianping, Wang Zhi, Chu Fenghong. Study of acetone sensing test based on Raman spectroscopy and microstructure optical fiber［J］. Journal of Optoelectronics·Laser, 2015(7): 1309-1313.
[17] Steiner G, Zimmerer C. Poly(methyl methacrylate) (PMMA)［M］∥ Arndt K F, Lechner M D. Polymer solids and polymer melts—Definitions and physical properties I. Heidelberg: Springer International Publishing, 2013.
