• Infrared and Laser Engineering
  • Vol. 48, Issue 1, 120002 (2019)
Huang Cong, You Xinghai, and Zhang Bin
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/irla201948.0120002 Cite this Article
    Huang Cong, You Xinghai, Zhang Bin. Influence of surface cleanliness of optical element on its surface scattering characteristics[J]. Infrared and Laser Engineering, 2019, 48(1): 120002 Copy Citation Text show less
    References

    [1] Xiao Jing, Zhang Bin. Influence of the optical components contamination on the signal to noise ratio in infrared optical systems[J]. Infrared and Laser Engineering, 2012, 41(4): 1010-1016. (in Chinese)

    [2] Sun Tengfei, Zhang Jun, Lv Haibing, et al. Influence of optical mirror pollution on laser transmission characteristics [J]. Infrared and Laser Engineering, 2014, 43(5): 1444-1448. (in Chinese)

    [3] Mcguire A F, Hapke B W. An experimental study of light scattering by large, irregular particles[J]. Icarus, 1995, 113(1): 134-155.

    [4] Paul R Spyak, William L Wolfe. Scatter from particulate-contaminated mirrors. part 2: theory and experiment for dust and λ=0.632 8 μm[J]. Optical Engineering, 1992, 31(8):1757-1763.

    [5] Ma Jing, Zhu Funan, Zhou Yanping, et al. Optical surface pollution detection device for dual-use star and earth [J]. Optics and Precision Engineering, 2016, 24(8): 1878-1883. (in Chinese)

    [6] Song Yuan, Lu Qipeng, Gong Xuepeng, et al. Carbon contamination cleaning on the surface of multi-layer film reflector of EUV lithography[J]. Optics and Precision Engineering, 2017, 25(11): 2835-2844. (in Chinese)

    [7] Huang Zhiqiang. Analysis and study of stray light in infrared system [D]. Chengdu: Optoelectronic Technology Research Institute, 2006. (in Chinese)

    [8] Kerker M. The Scattering of Light and Other Electromagnetic Radiation[M]. New York: Academy Press, 1969.

    [9] Young R P. Low-scatter mirror degradation by particle contamination[J]. Optical Engineering, 1976, 15(6): 516-520.

    [10] Tribble A C, Boyadjian B, Davis J, et al. Contamination control engineering design guidelines for the aerospace community[C]//SPIE, 1996, 2864: 4-15.

    [11] Spyak P R, Wolfe W L. Scatter from particulate-contaminated mirrors. part 4: properties of scatter from dust for visible to far-infrared wavelengths[J]. Optical Engineering, 1992, 31(8): 1775-1784.

    [12] Hamberg O, Shon E M. Particle size distribution on surfaces in clean rooms[R]. California: Vehicle Engineering Division of the Group of the Aerospace Corporation, 1984.

    [13] Zhou Lidan. Research on Statistical law between optical component "defects" distribution and near-field quality in high power laser system[D]. Mianyang: China Academy of Engineering Physics, 2009. (in Chinese)

    [14] You Xinghai, Hu Xiaochuan, Peng Jiaqi, et al. Effect of defects of component on stray radiation characteristics of infrared optical system[J]. Infrared and Laser Engineering, 2017, 46(1): 0120004. (in Chinese)

    [15] Shan Yongguang, Liu Xiaofeng, He Hongbo, et al. Research progress of nodular defect in optical coatings[J]. High Power Laser and Particle Beams, 2011, 23(6): 1421-1429. (in Chinese)

    [16] Liao Zhibo, Jiao Wenchun, Fu Rimin. Simulation of optical surface in high frequency error analysis of [J]. Infrared and Laser Engineering, 2014, 43(6): 1905-1908. (in Chinese)

    [17] Dai Yifan, Wu Dongliang, Wang Guilin. The effect of high frequency error on the ratio of scattering loss in optical processing [J]. Optics and Precision Engineering, 2009, 17 (10): 2365-2370. (in Chinese)

    [18] Young R P. Mirror-scatter degradation by particulate contamination[C]//SPIE, 1990, 1329: 246-254.

    Huang Cong, You Xinghai, Zhang Bin. Influence of surface cleanliness of optical element on its surface scattering characteristics[J]. Infrared and Laser Engineering, 2019, 48(1): 120002
    Download Citation