• Journal of Inorganic Materials
  • Vol. 36, Issue 1, 49 (2021)
Peng WAN1、2, Mian LI1, and Qing HUANG1、*
Author Affiliations
  • 1Engineering Laboratory of Advanced Energy Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
  • 2State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049, China;
  • show less
    DOI: 10.15541/jim20200068 Cite this Article
    Peng WAN, Mian LI, Qing HUANG. Molten Salt Assisted Synthesis of Dy3Si2C2 Coated SiC Powders and Sintering Behavior of SiC Ceramics[J]. Journal of Inorganic Materials, 2021, 36(1): 49 Copy Citation Text show less
    References

    [1] H EOM J, K SEO Y, W KIM Y. Mechanical and thermal properties of pressureless sintered silicon carbide ceramics with alumina-yttria-calcia. Journal of the American Ceramic Society, 99, 1735-1741(2016).

    [2] R YUAN, J KRUZIC J, F ZHANG X et al. Ambient to high-temperature fracture toughness and cyclic fatigue. Acta Materialia, 51, 6477-6491(2003).

    [3] D ZHAN G, M MITOMO, J XIE R et al. Thermal and electrical properties in plasma-activation-sintered silicon carbide with rare-earth-oxide additives. Journal of the American Ceramic Society, 84, 2448-2450(2001).

    [4] F RODRíGUEZ R, A ORTIZ, F GUIBERTEAU et al. Anomalous oxidation behaviour of pressureless liquid-phase-sintered SiC. Journal of the European Ceramic Society, 31, 2393-2400(2011).

    [5] M LI, B ZHOU X, H YANG et al. The critical issues of SiC materials for future nuclear systems. Scripta Materialia, 143, 149-153(2018).

    [6] D SCITI, A BELLOS. Effects of additives on densification, microstructure and properties of liquid-phase sintered silicon carbide. Journal of Materials Science, 35, 3849-3855(2000).

    [8] W LIN B, M IMAI, T YANO et al. Hot-pressing of β-SiC powder with Al-B-C additives. Journal of the American Ceramic Society, 69(1986).

    [9] G MAGNANI, G BELTRAMI, L MINOCCARI G et al. Pressureless sintering and properties of α-SiC-B4C composite. Journal of the European Ceramic Society, 21, 633-638(2001).

    [10] Y ZHOU, K HIRAO, Y YAMAUCHI et al. Effects of rare-earth oxide and alumina additives on thermal conductivity of liquid-phase-sintered silicon carbide. Journal of Materials Research, 18, 1854-1862(2003).

    [11] Y CHO T, W KIM Y. Effect of grain growth on the thermal conductivity of liquid-phase sintered silicon carbide ceramics. Journal of the European Ceramic Society, 37, 3475-3481(2017).

    [12] Q SHAO J, M LI, K CHANG K et al. Fabrication and characterization of SPS sintered SiC-based ceramic from Y3Si2C2-coated SiC powders. Journal of the European Ceramic Society, 38, 4833-4841(2018).

    [13] P WAN, M LI, K XU et al. Seamless joining of silicon carbide ceramics through an sacrificial interlayer of Dy3Si2C2. Journal of the European Ceramic Society, 39, 5457-5462(2019).

    [14] M LI, Y CHEN F, Y SI X et al. Copper-SiC whiskers composites with interface optimized by Ti3SiC2. Journal of Materials Science, 53, 9809-9815(2018).

    [15] K YE J, W ZHANG S, E LEE W. Novel low temperature synthesis and characterisation of hollow silicon carbide spheres. Microporous and Mesoporous Materials, 152, 25-30(2012).

    [16] K YE J, W ZHANG S, E LEE W. Molten salt synthesis and characterization of SiC coated carbon black particles for refractory castable applications. Journal of the European Ceramic Society, 33, 2023-2029(2013).

    [17] L SNEAD L, T NOZAWA, Y KATOH et al. Handbook of SiC properties for fuel performance modeling. Journal of Nuclear Materials, 371, 329-377(2007).

    Peng WAN, Mian LI, Qing HUANG. Molten Salt Assisted Synthesis of Dy3Si2C2 Coated SiC Powders and Sintering Behavior of SiC Ceramics[J]. Journal of Inorganic Materials, 2021, 36(1): 49
    Download Citation