• Infrared and Laser Engineering
  • Vol. 46, Issue 5, 517001 (2017)
Wang Peng1、2, Zhou Quantong1, and Sun Changku1、2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.3788/irla201746.0517001 Cite this Article
    Wang Peng, Zhou Quantong, Sun Changku. Study of pose estimation based on multiple feature points topological determination[J]. Infrared and Laser Engineering, 2017, 46(5): 517001 Copy Citation Text show less
    References

    [1] Sun C, Sun P, Wang P. An improvement of pose measurement method using global control points calibration[J]. Plos One, 2015, 10(7): e0133905.

    [2] Chen Haixin, Gu Guohua, Qian Weixian, et al. A Fast method for moving target detection on a moving carema[J]. Acta Photonica Sinica, 2014, 43(3): 133-138. (in Chinese)

    [3] Neumayr R, Zsombor-Murray P, O′Leary P, et al. Precise pose measurement with single camera calibration for planar parallel manipulators[J]. Transactions-Canadian Society for Mechanical Engineering, 2011, 35(35): 201-213.

    [4] Zeng Zhankui, Gu Qiangwei, Cao Xibin, et al. Relative pose monocular vision determination of spacecraft using orthogonal Procrustes analysis[J]. Infrared and Laser Engineering, 2015, 44(S1): 113-118. (in Chinese)

    [5] Wu Fuchao, Hu Zhanyi. A linear method for the PnP problem[J]. Journal of Software, 2003, 14(3): 682-688. (in Chinese)

    [6] Duan Fuqing, Wu Fuchao, Hu Zhanyi. Camera calibration and 3D reconstruction using parallelism constraint[J]. Journal of Software, 2007, 18(6):1350-1360. (in Chinese)

    [7] Wang Peng, Sun Changku, Zhang Zimiao. Linear pose estimation with a monocular vision system[J]. Chinese Journal of Scientific Instrument, 2011, 32(5): 1126-1131. (in Chinese)

    [8] Zhang Zimiao, Wang Peng, Sun Changku. Position and orientation measurement method with monocular vision and digital simulation[J]. Journal of Tianjin University, 2011, 44(5): 440-444. (in Chinese)

    [9] Liu Chang, Zhu Feng, Xia Renbo. Monocular pose determination from coplanar two points and one line features[J]. Application Research of Computers, 2012, 29(8): 3145-3147. (in Chinese)

    [10] Dementhon D F, Davis L S. Model-based object pose in 25 lines of code[J]. International Journal of Computer Vision, 1995, 15(1-2): 123-141.

    [11] Horaud R, Dornaika F, Lamiroy B. Object pose: the link between weak perspective, paraperspective, and full perspective[J]. International Journal of Computer Vision, 1997, 22(2): 173-189.

    [12] Xia Junjian, Xu Xiaoquan, Xiong Jiulong. Iterative pose estimation using paraperspective camera model[J]. Optics and Precision Engineering, 2012, 20(6): 1342-1349. (in Chinese)

    [13] Zhou Jing, Gao Yinhan, Liu Changying, et al. Attitude caculation of single camera visual system based on an adaptive algorithm[J]. Optics and Precision Engineering, 2012, 20(17): 2796-2803. (in Chinese)

    [14] David P, Dementhon D, Duraiswami R, et al. SoftPOSIT: simultaneous pose and correspondence determination[J]. International Journal of Computer Vision, 2002, 59(3):424-431.

    [16] Kriener, Charles R. A comparison and evaluation of three different pose estimation algorithms in detecting low texture manufactured objects[J]. Dissertations & Theses-Gradworks, 2011(3): 108-111.

    [17] Gold S, Rangarajan A, Lu C P, et al. New algorithms for 2D and 3D point matching: pose estimation and correspondence[J]. Pattern Recognition, 1999, 31(8): 1019-1031.

    [18] Knight P A. The sinkhorn-knopp algorithm: convergence and applications[J]. Siam Journal on Matrix Analysis & Applications, 2007, 30(1): 261-275.

    [19] Zhang Z. A flexible new technique for camera calibration[J]. IEEE Transactions on Pattern Analysis & Machine Intelligence, 2000, 22(11): 1330-1334.

    CLP Journals

    [1] LAO Da-bao, ZHANG Hui-juan, XIONG Zhi, ZHOU Wei-hu. Automatic Measurement Method of Attitude Based on Monocular Vision[J]. Acta Photonica Sinica, 2019, 48(3): 315001

    Wang Peng, Zhou Quantong, Sun Changku. Study of pose estimation based on multiple feature points topological determination[J]. Infrared and Laser Engineering, 2017, 46(5): 517001
    Download Citation