[1] Xueting Duan, Renkui Zhou, Mengyuan Wu, et al. Distortion aignment method for center shaft supporting large aperture mirror. Acta Photonica Sinica, 40, 95-96(2011).
[2] Kejun Wang, Ming Xuan, Jihong Dong, et al. Design method of reflector component structure of space remote sensor. Infrared and Laser Engineering, 45, 1113001(2016).
[3] Kejun Wang, Jihong Dong, Pingwei Zhou, et al. Back support structure design of mirror of space remote sensor. Infrared and Laser Engineering, 48, 0718004(2019).
[4] Nan Zhang, Shoucheng Pang, Junlei Chang, et al. Design and analysis of four-point spherical support for mirror. Spacecraft Recovery & Remote Sensing, 39, 65-66(2018).
[5] Lei Fan, Zhi Wang, Yuyan Cao. Analysis of mirror support based on active moment correction. Infrared and Laser Engineering, 44, 1274-1276(2015).
[6] Kejun Wang, Jihong Dong, Ming Xuan, et al. Compound support structure for large aperture mirror of space remote sensor. Optics and Precision Engineering, 44, 1720-1723(2015).
[7] Li Shenhua. Design optimization of mirr its'' suppt structure of space camera[D]. Changchun: Changchun University of Technology, 2018. (in Chinese)
[8] Qihong Bao, Wei Sha, Changzheng Chen, et al. Lightweight and optimization design of rectangular reflective mirror supported in centre. Infrared and Laser Engineering, 46, 0718003(2017).
[9] Hongda Chen, Yonghe Chen, Tingting Shi, et al. Lightweight and mounting design for primary mirror in space camera. Infrared and Laser Engineering, 43, 536-538(2014).
[10] Jinguo Tan, Xin He, Liangliang Fu. Support technique in centre of minitype reflector. Infrared and Laser Engineering, 39, 1071-1072(2010).
[11] Hong Xu, Yingjun Guan. Structural design of large aperture SiC mirror subassembly. Infrared and Laser Engineering, 43, 84-85(2014).
[12] Ke Rui. Analysis design of space mirr suppt structure[D]. Harbin: Harbin Institute of Technology, 2010. (in Chinese)
[13] Junqing Zhu, Wei Sha, Changzheng Chen, et al. Position layout of rear three point mounting for space rectangular mirror. Optics and Precision Engineering, 23, 2563-2564(2015).
[14] Cheng Chen, Wei Liu, Biao Liang. Design and analysis of flexible support structure for off-axis small-aperture parabolic reflector. Computer Simulation, 29, 59-60(2012).
[15] Bin Lan, Hongbo Yang, Xiaoxia Wu, et al. Optimal design of