[1] Pan J H. The Design, Manufacture and Test of the Aspherical Optical Surfaces[M]. Beijing: Science Press, 1994: 145–152.
[2] Lin J, Cui Q F, Zhu H. Research of broad width off-axis three mirror optical system[J]. Acta Optica Sinica, 2013, 33(7): 0722002.
[3] Wu Z H, Yuan L J, Zhu Y T, et al. Technology of wavefront retrieval for off-axis aspheric surface in the stage of fine- grinding and rough-polishing[J]. Acta Photonica Sinica, 2017, 46(3): 123–129.
[4] Cheng H B. Touch trigger probe measurement accuracy of aspheric mirror during fine lapping process[J]. Chinese Journal of Mechanical Engineering, 2005, 41(8): 228–232.
[5] Lin C Q, Jing H W, Kuang L, et al. Measuring technique for off-axis aspherical mirror in fine grinding process using coordinate measurement machine[J]. High Power Laser and Particle Beams, 2012, 24(11): 2665–2668.
[6] Li J, Wu F, Wu S B, et al. Using a laser tracker to measure the surface of off-axis aspheric mirror during grinding[J]. Acta Optica Sinica, 2012, 32(1): 0112002.
[7] Su P, Parks R E, Wang L R, et al. Software configurable optical test system: a computerized reverse Hartmann test[J]. Applied Optics, 2010, 49(23): 4404–4412.
[8] Huang R, Su P, Burgea J H. Deflectometry measurement of Daniel K. Inouye solar telescope primary mirror[J]. Proceedings of the SPIE, 2015, 9575: 957515.
[9] Yuan T, Zhang F, Tao X P, et al. Test of optical mirror surface using fringe reflection system[J]. Acta Photonica Sinica, 2015, 44(9): 0912004.
[10] Yang L J, Li D H, E K W, et al. Surface measurement of optical element based on the pre–calibrating camera[J]. Optics & Optoelectronic Technology, 2016, 14(3): 42–48.
[12] Zhao W C, Fan B, Wu F, et al. Experimental analysis of reflector test based on phase measuring deflectometry[J]. Acta Optica Sinica, 2013, 33(1): 0112002.
[13] Liu Y K, Su X Y, Wu Q Y. Three-dimensional shape measurement for specular surface based on fringe reflection[J]. Acta Optica Sinica, 2006, 26(11): 1636–1640.
[14] Huang R, Su P, Burge J H, et al. High-accuracy aspheric x-ray mirror metrology using software configurable optical test system/ deflectometry[J]. Optical Engineering, 2015, 54(8): 084103.
[16] Jing H L, Su X Y, Liu Y K. Specular surface measurement based on fringe reflection and analysis of 3D shape reconstruction technique[J]. Opto-Electronic Engineering, 2008, 35(10): 37–42.
[17] Parks R E, Kuhn W P. Optical alignment using the point source microscope[J]. Proceedings of SPIE, 2005, 5877: 102–116.
[18] Su X Y, Chen W J. Reliability-guided phase unwrapping algorithm: a review[J]. Optics and Lasers in Engineering, 2004, 42(3): 245–261.