[1] M. Harumoto, M. Shigehara, H. Suganuma. Gain-flattening filter using long-period fiber gratings［J］. J. Lightwave Technol., 2002, 20(6): 1027～1033
[2] K. S. Chiang. Development of long-period fiber grating coupling devices［J］. Appl. Opt., 2009, 48(25): F61～F67
[3] S. Z. Yin, K. W. Chung, X. Zhu. A highly sensitive long period grating based tunable filter using a unique double-cladding layer structure［J］. Opt. Commun., 2001, 188(5-6): 301～305
[4] S. W. James, R. P. Tatam. Optical fibre long-period grating sensors: characteristics and application［J］. Meas. Sci. Technol., 2003, 14(5): R49～R61
[5] P. Pilla, V. Malachovská, A. Borriello et al.. Transition mode long period grating biosensor with functional multilayer coatings［J］. Opt. Express, 2011, 19(2): 512～526
[6] Y. P. Wang, L. M. Xiao, D. N. Wang et al.. Highly sensitive long-period fiber-grating strain sensor with low temperature sensitivity［J］. Opt. Lett., 2006, 31(23): 3414～3416
[7] J. M. Fini, M. D. Mermelstein, M. F. Yan et al.. Distributed suppression of stimulated Raman scattering in an Yb-doped filter-fiber amplifier［J］. Opt. Lett., 2006, 31(17): 2550～2552
[8] C. He, X. L. Zeng, F. F. Pang et al.. Switchable multi-wavelength fiber laser using in-fiber Mach-Zehnder interferometer［C］. Shanghai: Opto-Electronics and Communication Conference, 2010, 358～359
[9] B. Zhou, A. P. Zhang, S. L. He et al.. Cladding-mode-recoupling-based tilted fiber Bragg grating sensor with a core-diameter-mismatched fiber section［J］. IEEE Photonics Journal, 2010, 2(2): 152～157
[10] Z. B. Tian, M. Nix, S. S. H. Yam. Laser beam shaping using a single-mode fiber abrupt taper［J］. Opt. Lett., 2009, 34(3): 229～231
[11] L. V. Nguyen, D. S. Hwang, S. B. Moon et al.. High temperature fiber sensor with high sensitivity based on core diameter mismatch［J］. Opt. Express, 2008, 16(15): 11369～11375
[12] H. Y. Choi, M. J. Kim, B. H. Lee. All-fiber Mach-Zehnder type interferometers formed in photonic crystal fiber［J］. Opt. Express, 2007, 15(9): 5711～5720
[13] Z. b. Tian, S. S. H. Yam, H. P. Loock. Single-mode fiber refractive index sensor based on core-offset attenuators［J］. IEEE Photon. Technol. Lett., 2008, 20(16): 1387～1389
[14] F. F. Pang, H. H. Liu, N. Chen et al.. Cladding-mode resonance of a double-cladding fiber at a near modal cut-off wavelength for RI sensing［J］. Measure. Sci. and Technol., 2010, 21(9): 094028
[15] F. F. Pang, W.C. Xiang, H. R. Guo et al.. Special optical fiber for temperature sensing based on cladding-mode resonance［J］. Opt. Express, 2008, 16(17): 12967～12972
[16] H. H. Liu, F. F. Pang, H. R. Guo et al.. In-series double cladding fibers for simultaneous refractive index and temperature measurement［J］. Opt. Express, 2010, 18(12): 13072～13082
[17] F. F. Pang, W. B. Liang, W. C. Xiang et al.. Temperature-insensitivity bending sensor based on cladding-mode resonance of special optical fiber［J］. IEEE Photon. Technol. Lett., 2009, 21(2): 76～78
[18] T. Y. Wang, F. F. Pang, X. L. Zeng et al.. Cladding mode resonance of special optical fiber for bending sensor with temperature insensitivity［C］. SPIE, 2008, 7004: 70042M
[19] H. H. Liu, F. F. Pang, N. Chen et al.. Optical liquid level sensor based on cladding-mode resonance of specialty double-cladding fiber［C］. SPIE, 2009, 7634: 76340M
[20] J. Zhang, F. F. Pang, H. R. Guo et al.. A strain sensor based on cladding mode resonance of optical double-cladding fiber［C］. SPIE, 2010, 7853: 78533U
[21] H. J. Patrick, A. D. Kersey, F. Bucholtz. Analysis of the response of long period fiber gratings to external index of refraction［J］. J. Lightwave Technol., 1998, 16(9): 1606～1612
