Micro S-Shaped Optical Fiber Temperature Sensor Based on Dislocation Fiber Splice

Haitao YAN; Pengfei LI; Haojie ZHANG; Xiaoyue SHEN; Yongzhen WANG

doi:10.1007/s13320-017-0450-0

[1] I. W. Jung, B. Park, J. Provine, R. T. Howe, and O. Solgaard, “Highly sensitive monolithic silicon photonic crystal fiber tip sensor for simultaneous measurement of refractive index and temperature,” Journal of Lightwave Technology, 2011, 29(9): 1367–1374.

[2] D. X. Hua, M. Uchida, and T. Kobayashi, “Ultraviolet Rayleigh-Mie lidar with Mie-scattering correction by Fabry-Perot etalons for temperature profiling of the troposphere,” Applied Optics, 2005, 44(7): 1305–1314.

[3] H. Y. Sun, S. C. Lien, Z. R. Qiu, H. C. Wang, T. Mei, C. W. Liu, et al., “Temperature dependence of Raman scattering in bulk 4H-SiC with different carrier concentration,” Optics Express, 2013, 21(22): 26475–26482.

[4] M. Kezmah and D. Donlagic, “All-fiber low-cost single-point and quasi-distributed evanescent field temperature sensors with extended temperature measurement range, based on standard telecommunication graded index fibers,” Applied Optics, 2008, 47(23): 4212–4220.

[5] J. Roths, G. Andrejevic, R. Kuttler, and M. Sü er, “Calibration of fiber bragg cryogenic temperature sensors,” Optical Fiber Sensors, 2006, 8383(3): 538–555.

[6] D. Donlagic and M. Lesic, “All-fiber quasi-distributed polarimetric temperature sensor,” Optics Express, 2006, 14(22): 10245–10254.

[7] J. He, C. R. Liao, K. M. Yang, S. Liu, G. L. Yin, B. sun, et al., “High-sensitivity temperature sensor based on a coated single-mode fiber loop,” Journal of Lightwave Technology, 2015, 33(19): 4019–4026.

[8] A. Wang, G. Z. Wang, K. A. Murphy, and R. O. Claus, “Fiber-optic temperature sensors based on differential spectral transmittance/reflectivity and multiplexed sensing systems,” Applied Optics, 1995, 34(13): 2295–2300.

[9] H. Zhang, Y. S. Qiu, Z. T. Huang, J. Z. Jiang, G. M. Li, H. X. Chen, et al., “Temperature and vibration robustness of reflecting all-fiber current sensor using common single-mode fiber,” Journal of Lightwave Technology, 2014, 32(22): 3709–3715.

[10] T. Stańczyk, K. Wysokiński, M. Filipowicz, T. Tenderenda, K. Giba a, H. Krisch, et al., “Electrolytic joints between metal surfaces and metal-coated fibers for application in high temperature optical fiber sensors,” Journal of Lightwave Technology, 2015, 33(12): 2480–2485.

[11] S. Rizzolo, E. Marin, A. Morana, A. Boukenter, Y. Ouerdane, M. Cannas, et al., “Investigation of coating impact on OFDR optical remote fiber-based sensors performances for their integration in high temperature and radiation environments,” Journal of Lightwave Technology, 2016, 34(19): 4460–4465.

[12] E. R. Vera, C. M. B. Cordeiro, and P. Torres, “Highly sensitive temperature sensor using a Sagnac loop interferometer based on a side-hole photonic crystal fiber filled with metal,” Applied Optics, 2017, 56(2): 156–162.

[13] G. Liu, M. Han, and W. Hou, “High-resolution and fast-response fiber-optic temperature sensor using silicon Fabry-Pérot cavity,” Optics Express, 2015, 23(6): 7237–7247.

[14] S. J. Weng, L. Pei, J. S. Wang, T. G. Ning, and J. Li, “High sensitivity d-shaped hole fiber temperature sensor based on surface plasmon resonance with liquid filling,” Photonics Research, 2017, 5(2): 103–107.

[15] W. J. Yoo, K. W. Jang, J. K. Seo, J. Y. Heo, J. S. Moon, J. Y. Park, et al., “Development of respiration sensors using plastic optical fiber for respiratory monitoring inside MRI system,” Journal of the Optical Society of Korea, 2010, 14(3): 235–239.

[16] B. Dong, D. P. Zhou, and L. Wei, “Temperature insensitive all-fiber compact polarizationmaintaining photonic crystal fiber interferometer and its applications in fiber sensors,” Journal of Lightwave Technology, 2101, 28(7): 1011–1015.