Zhongqi Zhang, Xuli Wei, Changming Liu, Kejia Wang, Jinsong Liu, Zhengang Yang. Rapid fabrication of terahertz lens via three-dimensional printing technology[J]. Chinese Optics Letters, 2015, 13(2): 022201
- Chinese Optics Letters
- Vol. 13, Issue 2, 022201 (2015)
Fig. 1. (a) Top view of the printed lens. (b) Side view of the printed lens.
Fig. 2. Characterizations of the polymer “FullCure835 VeroWhite.” The black curve is the refractive index, and the blue curve is the absorption coefficient.
Fig. 3. Diagram of a lens illuminated by a Gaussian beam. R r t f
Fig. 4. (a) 2D FDTD simulated intensity distribution of the focused Gaussian beam. (b) Axial normalized intensity distribution behind the printed lens [cutting along the red line in (a)]. (c) Lateral normalized intensity distribution [cutting along the green line in (a)].
Fig. 5. Experimental setup: Transmitter, Gunn Diode; Collimator, spherical lens; Detector, Schottky diode.
Fig. 6. (a) 2D Gaussian beam intensity profile images obtained by the point-scanning method. (b) Curve fitting (the red line) of the measured radial intensity distribution at d = 95 mm
Set citation alerts for the article
Please enter your email address
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20