[1] ABBOTT J J, NAGY Z, BEYELER F, et al.. Robotics in the Small, Part I: Microrobotics ［J］. IEEE Robotics & Automation Magazine, 2007, 14(2): 92-103.
[2] DONG L, NELSON B J. Robotics in the Small, Part II: Nanorobotics ［J］. IEEE Robotics & Automation Magazine, 2007, 14(3): 111-121.
[3] FUKUDA T, NAKAJIMA M, LIU P, et al.. Nanofabrication, nanoinstrumentation and nanoassembly by nanorobotic manipulation ［J］. Journal of Robotics Research, 2009, 28(4): 537-547.
[4] NELSON B J, DONG L X, SUBRAMANIAN A, et al.. Hybrid nanorobotic approaches to NEMS ［J］. Robotics Research, ser. Springer Tracts in Advanced Robotics (STAR), Springer, 2007, 28: 163-174.
[5] EICHHORN V, FATIKOW S, DAHMEN C, et al.. Automated microfactory inside a scanning electron microscope ［J］. Proceedings of the 6th International Workshop on Microfactories (IWMF), 2008, 207-212.
[6] TAGLIARENI F, NIERLICH M, STEINMETZ O, et al.. Manipulating biological cells with a micro-robot cluster［J］. Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2005, 1414-1419.
[7] MARTEL S, SHERWOOD M, HELM C, et al.. Three-legged wireless miniature robots for mass-scale operations at the sub-atomic scale［J］. Proceedings of the IEEE International Conference on Robotics and Automation (ICRA), 2001, 3423-3428.
[8] JASPER D, DIEDERICHS D, FATIKOW S. Hardware-based trajectory-controlled visual servoing of mobile microrobots ［J］. Proceedings of IFAC Symposium on Mechatronic Systems, 2010, 565-570.
[9] JASPER D, FATIKOW S. Line scan-based high-speed position tracking inside the SEM ［J］. International Journal of Optomechatronics, 2010, 4(2): 115-135.
[10] EICHHORN V, FATIKOW S, WICH T, et al.. Depth-detection methods for microgripper based CNT manipulation in a scanning electron microscope ［J］. Journal of Micro-Nano Mechatronics, 2008, 4(1): 27-36.
[11] DIEDERICHS C. Hardware-software co-design tracking system for predictable high-speed mobile microrobot position control［C］. Proceedings of IFAC Symposium on Mechatronic Systems, 2010, 14636-14641.
[12] JASPER D, EDELER C, DIEDERICHS C, et al.. High-speed nanorobot position control inside a scanning electron microscope［C］. Proceedings of Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology Conference, 2010, 542-546.
[13] JASPER D. High-speed position tracking for nanohandling inside scanning electron microscopes［C］. Proceedings of the IEEE International Conference on Robotics and Automation (ICRA), 2009, 508-513.
[14] LUTTERMANN T, WICH T, STOLLE C, et al.. Development of an automated desktop station for EBiD-based nano-assembly［C］. Proceedings of the 2nd International Conference on Micro-Manufacturing (ICOMM), 2007, 284-288.
[15] FATIKOW S, STOLLE C, DIEDERICHS C, et al.. Auto-configuration and self-calibration in flexible robot-based micro-/nanohandling cells［C］. Proceedings of the 18th IFAC World Congress, 2011, 14630-14635.
[16] BRUGGER J, BUSER R A, DE ROOIJ N F. Silicon cantilevers and tips for scanning force microscopy ［J］. Sensors and Actuators A, 1992, 34(3): 193-200.
[17] RASMUSSEN P A, THAYSEN J, BOUWSTRA S, et al.. Modular design of AFM probe with sputtered silicon tip ［J］. Sensors and Actuators A: Physical, 2001, 92(1-3): 96-101.
[18] WANG Y, VAN DER WEIDE D W. Microfabrication and application of high-aspect-ratio silicon tips ［J］. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 2009, 23: 1582-1584.
[19] IIJIMA S. Helical microtubules of graphitic carbon ［J］. Nature, 1991, 354: 56-58.
[20] LI Y, QIAN F, XIANG J, et al.. Nanowire electronic and optoelectronic devices ［J］. Materials Today, 2006, 9(10): 18-27.
[21] DAI H, HAFNER J H, RINZLER A G, et al.. Nanotubes as nanoprobes in scanning probe microscopy ［J］. Nature, 1996, 384: 147-150.
[22] RAJENDRA KUMAR R T, HASSAN S U, SARDAN SUKAS O, et al.. Nanobits: customizable scanning probe tips ［J］. Nanotechnology, 2009, 20(39): 395703.
[23] NAKAYAMA Y. Scanning probe microscopy installed with nanotube probes and nanotube tweezers ［J］. Ultramicroscopy, 2002, 91: 49-56.
[24] FAHLBUSCH S, MAZEROLLE S, BREGUET J M, et al.. Nanomanipulation in a scanning electron microscope ［J］. Journal of Materials Processing Technology, 2005, 167(2-3): 371-382.
[25] TANG J, YANG G, ZHANG Q, et al.. Rapid and reproducible fabrication of carbon nanotube AFM probes by dielectrophoresis ［J］. Nano Letters, 2005, 5(5): 11-14.
[26] STEVENS R M D, FREDERICK N A, SMITH B L, et al.. Carbon nanotubes as probes for atomic force microscopy ［J］. Nanotechnology, 2000, 11: 1-5.
[27] HAFNER J H, CHEUNG C L, LIEBER C M. Growth of nanotubes for probe microscopy tips ［J］. Nature, 1999, 398: 761-762.
[28] YE Q, CASSELL A M, LIU H, et al.. Large-scale fabrication of carbon nanotube probe tips for atomic force microscopy critical dimension imaging applications ［J］. Nano Letters, 2004, 4(7): 1301-1308.
[29] BARTENWERFER M, EICHHORN V, JASPER D, et al.. Automated handling and assembly of customizable AFM-tips［C］. Proceedings of the IEEE International Symposium on Assembly and Manufacturing (ISAM), 2011, 1-6.
[30] RNEICHHO V, BARTENWERFER M, FATIKOW S. Nanorobotic assembly and focused ion beam processing of nanotube-enhanced AFM probes ［J］. IEEE Transactions on Automation Science and Engineering, 2012, 9(4): 679-685.
[31] International Technology Roadmap for Semiconductors (ITRS 2011)［Online］. Available: http: //www.itrs.net
